A study of the factors influencing the kinetics in Ag/Al bilayer systems

Ag (∼200 nm)/Al (∼20–30 nm) bilayer structures on silicon-dioxide substrates were annealed at temperatures ranging from 400 to 600 °C for times 15–120 min in a flowing ammonia ambient. Rutherford backscattering spectrometry (RBS) analysis showed that upon annealing the Al reduces the SiO 2 as well a...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Thin solid films 2004-11, Vol.467 (1), p.267-274
Hauptverfasser: Malgas, Gerald F., Adams, Daniel, Alford, T.L., Mayer, J.W.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 274
container_issue 1
container_start_page 267
container_title Thin solid films
container_volume 467
creator Malgas, Gerald F.
Adams, Daniel
Alford, T.L.
Mayer, J.W.
description Ag (∼200 nm)/Al (∼20–30 nm) bilayer structures on silicon-dioxide substrates were annealed at temperatures ranging from 400 to 600 °C for times 15–120 min in a flowing ammonia ambient. Rutherford backscattering spectrometry (RBS) analysis showed that upon annealing the Al reduces the SiO 2 as well as diffusing to the free surface to react with residual oxygen in the ambient to form an Al-oxide passivation layer. The reduction of the SiO 2 results in free O inside the Ag, which is available to react with the diffused Al constituting a competition to the surface reaction. The reaction of the diffused Al with the freed O results in an increased trapping of Al inside the Ag instead of diffusing to the surface. The trapped Al translates into an increased residual aluminum concentration. The larger trapping of Al as a result of the SiO 2 reduction imposes an additional barrier to the transport of Al through the Ag and also an upper limit to the Al-oxide passivation layer thickness. Activation energies of between 0.25 and 0.34 eV were obtained for the two different Al thicknesses (20 and 30 nm) used in this experiment. It is therefore evident that the different Al thicknesses have no significant influence on the activation energies but definitely affect the formation of the Al-oxide passivation as a direct consequence of increased trapping of the aluminum in the Ag. It is therefore, desirable to use Al interlayers of less than 10 nm in order to minimize SiO 2 reduction and reduce the residual Al concentration.
doi_str_mv 10.1016/j.tsf.2004.04.025
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_28692528</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0040609004004730</els_id><sourcerecordid>28692528</sourcerecordid><originalsourceid>FETCH-LOGICAL-c387t-10c7fe5a4e04615442bc8030c747dd1e1b27558860a39638766415f76e552bff3</originalsourceid><addsrcrecordid>eNqNkE1LAzEQhoMoWD9-gLe96G3bJJtkt3gqRa1Q8KLnkGYnNXW7WzNZof_erC14E2FgYOZ5Z-Ah5IbRMaNMTTbjiG7MKRXjobg8ISNWldOclwU7JaO0oLmiU3pOLhA3lFLGeTEii1mGsa_3Weey-A6ZMzZ2ATPfuqaH1vp2_TP_8C1Eb4dFNltPZk228o3ZQ8hwjxG2eEXOnGkQro_9krw9PrzOF_ny5el5PlvmtqjKmDNqSwfSCKBCMSkEX9mKFmkqyrpmwFa8lLKqFDXFVKWIUoJJVyqQkq-cKy7J3eHuLnSfPWDUW48Wmsa00PWoeaWmXPLqH6BgRcFVAtkBtKFDDOD0LvitCXvNqB7k6o1OcvUgVw_FZcrcHo8btKZxwSRV-BtUjLNSisTdHzhISr48BI3WJ61Q-wA26rrzf3z5BrZ9jOY</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>28413326</pqid></control><display><type>article</type><title>A study of the factors influencing the kinetics in Ag/Al bilayer systems</title><source>Elsevier ScienceDirect Journals Complete</source><creator>Malgas, Gerald F. ; Adams, Daniel ; Alford, T.L. ; Mayer, J.W.</creator><creatorcontrib>Malgas, Gerald F. ; Adams, Daniel ; Alford, T.L. ; Mayer, J.W.</creatorcontrib><description>Ag (∼200 nm)/Al (∼20–30 nm) bilayer structures on silicon-dioxide substrates were annealed at temperatures ranging from 400 to 600 °C for times 15–120 min in a flowing ammonia ambient. Rutherford backscattering spectrometry (RBS) analysis showed that upon annealing the Al reduces the SiO 2 as well as diffusing to the free surface to react with residual oxygen in the ambient to form an Al-oxide passivation layer. The reduction of the SiO 2 results in free O inside the Ag, which is available to react with the diffused Al constituting a competition to the surface reaction. The reaction of the diffused Al with the freed O results in an increased trapping of Al inside the Ag instead of diffusing to the surface. The trapped Al translates into an increased residual aluminum concentration. The larger trapping of Al as a result of the SiO 2 reduction imposes an additional barrier to the transport of Al through the Ag and also an upper limit to the Al-oxide passivation layer thickness. Activation energies of between 0.25 and 0.34 eV were obtained for the two different Al thicknesses (20 and 30 nm) used in this experiment. It is therefore evident that the different Al thicknesses have no significant influence on the activation energies but definitely affect the formation of the Al-oxide passivation as a direct consequence of increased trapping of the aluminum in the Ag. It is therefore, desirable to use Al interlayers of less than 10 nm in order to minimize SiO 2 reduction and reduce the residual Al concentration.</description><identifier>ISSN: 0040-6090</identifier><identifier>EISSN: 1879-2731</identifier><identifier>DOI: 10.1016/j.tsf.2004.04.025</identifier><identifier>CODEN: THSFAP</identifier><language>eng</language><publisher>Lausanne: Elsevier B.V</publisher><subject>Activation energies ; Al diffusion ; Al-oxide passivation ; Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization ; Cold working, work hardening; annealing, quenching, tempering, recovery, and recrystallization; textures ; Cross-disciplinary physics: materials science; rheology ; Exact sciences and technology ; Kinetics ; Materials science ; Physics ; Silver metallization ; Treatment of materials and its effects on microstructure and properties</subject><ispartof>Thin solid films, 2004-11, Vol.467 (1), p.267-274</ispartof><rights>2004 Elsevier B.V.</rights><rights>2005 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c387t-10c7fe5a4e04615442bc8030c747dd1e1b27558860a39638766415f76e552bff3</citedby><cites>FETCH-LOGICAL-c387t-10c7fe5a4e04615442bc8030c747dd1e1b27558860a39638766415f76e552bff3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S0040609004004730$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3537,27901,27902,65306</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&amp;idt=16121754$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Malgas, Gerald F.</creatorcontrib><creatorcontrib>Adams, Daniel</creatorcontrib><creatorcontrib>Alford, T.L.</creatorcontrib><creatorcontrib>Mayer, J.W.</creatorcontrib><title>A study of the factors influencing the kinetics in Ag/Al bilayer systems</title><title>Thin solid films</title><description>Ag (∼200 nm)/Al (∼20–30 nm) bilayer structures on silicon-dioxide substrates were annealed at temperatures ranging from 400 to 600 °C for times 15–120 min in a flowing ammonia ambient. Rutherford backscattering spectrometry (RBS) analysis showed that upon annealing the Al reduces the SiO 2 as well as diffusing to the free surface to react with residual oxygen in the ambient to form an Al-oxide passivation layer. The reduction of the SiO 2 results in free O inside the Ag, which is available to react with the diffused Al constituting a competition to the surface reaction. The reaction of the diffused Al with the freed O results in an increased trapping of Al inside the Ag instead of diffusing to the surface. The trapped Al translates into an increased residual aluminum concentration. The larger trapping of Al as a result of the SiO 2 reduction imposes an additional barrier to the transport of Al through the Ag and also an upper limit to the Al-oxide passivation layer thickness. Activation energies of between 0.25 and 0.34 eV were obtained for the two different Al thicknesses (20 and 30 nm) used in this experiment. It is therefore evident that the different Al thicknesses have no significant influence on the activation energies but definitely affect the formation of the Al-oxide passivation as a direct consequence of increased trapping of the aluminum in the Ag. It is therefore, desirable to use Al interlayers of less than 10 nm in order to minimize SiO 2 reduction and reduce the residual Al concentration.</description><subject>Activation energies</subject><subject>Al diffusion</subject><subject>Al-oxide passivation</subject><subject>Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization</subject><subject>Cold working, work hardening; annealing, quenching, tempering, recovery, and recrystallization; textures</subject><subject>Cross-disciplinary physics: materials science; rheology</subject><subject>Exact sciences and technology</subject><subject>Kinetics</subject><subject>Materials science</subject><subject>Physics</subject><subject>Silver metallization</subject><subject>Treatment of materials and its effects on microstructure and properties</subject><issn>0040-6090</issn><issn>1879-2731</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2004</creationdate><recordtype>article</recordtype><recordid>eNqNkE1LAzEQhoMoWD9-gLe96G3bJJtkt3gqRa1Q8KLnkGYnNXW7WzNZof_erC14E2FgYOZ5Z-Ah5IbRMaNMTTbjiG7MKRXjobg8ISNWldOclwU7JaO0oLmiU3pOLhA3lFLGeTEii1mGsa_3Weey-A6ZMzZ2ATPfuqaH1vp2_TP_8C1Eb4dFNltPZk228o3ZQ8hwjxG2eEXOnGkQro_9krw9PrzOF_ny5el5PlvmtqjKmDNqSwfSCKBCMSkEX9mKFmkqyrpmwFa8lLKqFDXFVKWIUoJJVyqQkq-cKy7J3eHuLnSfPWDUW48Wmsa00PWoeaWmXPLqH6BgRcFVAtkBtKFDDOD0LvitCXvNqB7k6o1OcvUgVw_FZcrcHo8btKZxwSRV-BtUjLNSisTdHzhISr48BI3WJ61Q-wA26rrzf3z5BrZ9jOY</recordid><startdate>20041122</startdate><enddate>20041122</enddate><creator>Malgas, Gerald F.</creator><creator>Adams, Daniel</creator><creator>Alford, T.L.</creator><creator>Mayer, J.W.</creator><general>Elsevier B.V</general><general>Elsevier Science</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7QF</scope><scope>7U5</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope><scope>L7M</scope><scope>H8D</scope></search><sort><creationdate>20041122</creationdate><title>A study of the factors influencing the kinetics in Ag/Al bilayer systems</title><author>Malgas, Gerald F. ; Adams, Daniel ; Alford, T.L. ; Mayer, J.W.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c387t-10c7fe5a4e04615442bc8030c747dd1e1b27558860a39638766415f76e552bff3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2004</creationdate><topic>Activation energies</topic><topic>Al diffusion</topic><topic>Al-oxide passivation</topic><topic>Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization</topic><topic>Cold working, work hardening; annealing, quenching, tempering, recovery, and recrystallization; textures</topic><topic>Cross-disciplinary physics: materials science; rheology</topic><topic>Exact sciences and technology</topic><topic>Kinetics</topic><topic>Materials science</topic><topic>Physics</topic><topic>Silver metallization</topic><topic>Treatment of materials and its effects on microstructure and properties</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Malgas, Gerald F.</creatorcontrib><creatorcontrib>Adams, Daniel</creatorcontrib><creatorcontrib>Alford, T.L.</creatorcontrib><creatorcontrib>Mayer, J.W.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Aluminium Industry Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><collection>Aerospace Database</collection><jtitle>Thin solid films</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Malgas, Gerald F.</au><au>Adams, Daniel</au><au>Alford, T.L.</au><au>Mayer, J.W.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>A study of the factors influencing the kinetics in Ag/Al bilayer systems</atitle><jtitle>Thin solid films</jtitle><date>2004-11-22</date><risdate>2004</risdate><volume>467</volume><issue>1</issue><spage>267</spage><epage>274</epage><pages>267-274</pages><issn>0040-6090</issn><eissn>1879-2731</eissn><coden>THSFAP</coden><abstract>Ag (∼200 nm)/Al (∼20–30 nm) bilayer structures on silicon-dioxide substrates were annealed at temperatures ranging from 400 to 600 °C for times 15–120 min in a flowing ammonia ambient. Rutherford backscattering spectrometry (RBS) analysis showed that upon annealing the Al reduces the SiO 2 as well as diffusing to the free surface to react with residual oxygen in the ambient to form an Al-oxide passivation layer. The reduction of the SiO 2 results in free O inside the Ag, which is available to react with the diffused Al constituting a competition to the surface reaction. The reaction of the diffused Al with the freed O results in an increased trapping of Al inside the Ag instead of diffusing to the surface. The trapped Al translates into an increased residual aluminum concentration. The larger trapping of Al as a result of the SiO 2 reduction imposes an additional barrier to the transport of Al through the Ag and also an upper limit to the Al-oxide passivation layer thickness. Activation energies of between 0.25 and 0.34 eV were obtained for the two different Al thicknesses (20 and 30 nm) used in this experiment. It is therefore evident that the different Al thicknesses have no significant influence on the activation energies but definitely affect the formation of the Al-oxide passivation as a direct consequence of increased trapping of the aluminum in the Ag. It is therefore, desirable to use Al interlayers of less than 10 nm in order to minimize SiO 2 reduction and reduce the residual Al concentration.</abstract><cop>Lausanne</cop><pub>Elsevier B.V</pub><doi>10.1016/j.tsf.2004.04.025</doi><tpages>8</tpages></addata></record>
fulltext fulltext
identifier ISSN: 0040-6090
ispartof Thin solid films, 2004-11, Vol.467 (1), p.267-274
issn 0040-6090
1879-2731
language eng
recordid cdi_proquest_miscellaneous_28692528
source Elsevier ScienceDirect Journals Complete
subjects Activation energies
Al diffusion
Al-oxide passivation
Cold working, work hardening
annealing, post-deformation annealing, quenching, tempering recovery, and crystallization
Cold working, work hardening
annealing, quenching, tempering, recovery, and recrystallization
textures
Cross-disciplinary physics: materials science
rheology
Exact sciences and technology
Kinetics
Materials science
Physics
Silver metallization
Treatment of materials and its effects on microstructure and properties
title A study of the factors influencing the kinetics in Ag/Al bilayer systems
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-12T13%3A47%3A24IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=A%20study%20of%20the%20factors%20influencing%20the%20kinetics%20in%20Ag/Al%20bilayer%20systems&rft.jtitle=Thin%20solid%20films&rft.au=Malgas,%20Gerald%20F.&rft.date=2004-11-22&rft.volume=467&rft.issue=1&rft.spage=267&rft.epage=274&rft.pages=267-274&rft.issn=0040-6090&rft.eissn=1879-2731&rft.coden=THSFAP&rft_id=info:doi/10.1016/j.tsf.2004.04.025&rft_dat=%3Cproquest_cross%3E28692528%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=28413326&rft_id=info:pmid/&rft_els_id=S0040609004004730&rfr_iscdi=true