Superconducting correction impulse magnets for the accelerator Nuclotron

Superconducting correction impulse magnets for the accelerator Nuclotron

The superconducting accelerator Nuclotron was put into operation at JINR, Dubna. The accelerator contains 112 multipole correction windings. Each four of them are assembled as a magnet block with an inner diameter of 132 mm. The winding has one or two layers from NbTi multifilament conductor. The wi...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE Transactions on Magnetics 1996-07, Vol.32 (4), p.2197-2199
Hauptverfasser: Baldin, A.M., Agapov, N.N., Anishchenko, N.G., Averichev, S.A., Bartenev, V.D., Blinov, N.A., Datskov, V.I., Donyagin, A.M., D'yachkov, E.I., Goncharov, I.N., Issinsky, I.B., Khodzhibagiyan, H.G., Kovalenko, A.D., Kulikov, Yu.V., Kuzichev, V.N., Makarov, L.G., Mikhailov, V.A., Rihter, D., Smirnov, A.A., Starikov, A.Yu, Shishov, Yu.A., Volkov, V.Ya
Format: Artikel
Sprache:eng
Schlagworte:
Acceleration
Accelerator magnets
ACCELERATORS
Assembly
BEAM BENDING MAGNETS
BEAM OPTICS
Conductors
CORRECTIONS
DESIGN
INSTALLATION
Multifilamentary superconductors
MULTIPOLES
Niobium compounds
ORBITS
PARTICLE ACCELERATORS
PARTICLE BEAMS
Superconducting epitaxial layers
SUPERCONDUCTING MAGNETS
Titanium compounds
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The superconducting accelerator Nuclotron was put into operation at JINR, Dubna. The accelerator contains 112 multipole correction windings. Each four of them are assembled as a magnet block with an inner diameter of 132 mm. The winding has one or two layers from NbTi multifilament conductor. The windings are impregnated with epoxy resin compound and glued on the tube coil with two-phase helium forced at 4.5 K. Each magnet has 100 A current leads without helium gas cooling. This very much simplifies the system of helium gas collection at the accelerator. All the magnets were tested and installed in the accelerator.
ISSN:0018-9464
1941-0069
DOI:10.1109/20.508602