Effect of feedstock injection methods on oxidation behavior and microstructure of plasma sprayed W/Cu composites
Free-standing tungsten/copper composite plates that may be used as heat sink material for electronic packaging were produced by the air plasma spray process. Two kinds of spray torch were used to investigate the oxidation, microstructure, composition recovery, and coefficient of thermal expansion (C...
Gespeichert in:
Veröffentlicht in: | Surface & coatings technology 2004-04, Vol.182 (1), p.124-130 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 130 |
---|---|
container_issue | 1 |
container_start_page | 124 |
container_title | Surface & coatings technology |
container_volume | 182 |
creator | Kang, Hyun-Ki Bong Kang, Suk |
description | Free-standing tungsten/copper composite plates that may be used as heat sink material for electronic packaging were produced by the air plasma spray process. Two kinds of spray torch were used to investigate the oxidation, microstructure, composition recovery, and coefficient of thermal expansion (CTE) with respect to internal feedstock injection (IFI) and external feedstock injection (EFI). Very little copper oxidation from the IFI was detected by XRD analysis. Most pores were found in the vicinity of tungsten-rich grains. More tungsten in the deposits was lost in the use of the EFI than with IFI. Thermal expansion coefficient of plasma sprayed composite (72W/28Cu vol.%) was approximately 5.2×10
−6/K. The experimental results indicated that the IFI shows higher energy efficiency for the tungsten recovery than the EFI. Some detailed observations of microstructures are also discussed. |
doi_str_mv | 10.1016/j.surfcoat.2003.08.055 |
format | Article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_28164484</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S025789720300954X</els_id><sourcerecordid>28164484</sourcerecordid><originalsourceid>FETCH-LOGICAL-c408t-de10fe647ce49811d2558e0d25e120f01d101c4352db967abb4cb50138098a173</originalsourceid><addsrcrecordid>eNqFkEFv1DAQhS0EEsu2fwH5Arek48RJnBtoVaBSJS5UPVqOPVa9JHHwJBX993jZIo7VHGY0ejNP72PsvYBSgGivjiVtydto1rICqEtQJTTNK7YTquuLupbda7aDqukK1XfVW_aO6AgAouvlji3X3qNdefTcIzpao_3Jw3zMuxBnPuH6EB3xPMbfwZm_ywEfzGOIiZvZ8SnYFGlNm123hKc_y2hoMpyWZJ7Q8furw8ZtnJZIYUW6YG-8GQkvn_ue3X25_nH4Vtx-_3pz-HxbWAlqLRwK8NjKzqLslRCuahqFkBuKCjwIl7NbWTeVG_q2M8Mg7dCAqBX0yoiu3rOP579Lir82pFVPgSyOo5kxbqQrJVoplczC9iw85aCEXi8pTCY9aQH6BFgf9T_A-gRYg9IZcD788OxgyJrRJzPbQP-vm7atIdeefTrrMMd9DJg02YCzRRdSxqxdDC9Z_QEiXJal</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>28164484</pqid></control><display><type>article</type><title>Effect of feedstock injection methods on oxidation behavior and microstructure of plasma sprayed W/Cu composites</title><source>Access via ScienceDirect (Elsevier)</source><creator>Kang, Hyun-Ki ; Bong Kang, Suk</creator><creatorcontrib>Kang, Hyun-Ki ; Bong Kang, Suk</creatorcontrib><description>Free-standing tungsten/copper composite plates that may be used as heat sink material for electronic packaging were produced by the air plasma spray process. Two kinds of spray torch were used to investigate the oxidation, microstructure, composition recovery, and coefficient of thermal expansion (CTE) with respect to internal feedstock injection (IFI) and external feedstock injection (EFI). Very little copper oxidation from the IFI was detected by XRD analysis. Most pores were found in the vicinity of tungsten-rich grains. More tungsten in the deposits was lost in the use of the EFI than with IFI. Thermal expansion coefficient of plasma sprayed composite (72W/28Cu vol.%) was approximately 5.2×10
−6/K. The experimental results indicated that the IFI shows higher energy efficiency for the tungsten recovery than the EFI. Some detailed observations of microstructures are also discussed.</description><identifier>ISSN: 0257-8972</identifier><identifier>EISSN: 1879-3347</identifier><identifier>DOI: 10.1016/j.surfcoat.2003.08.055</identifier><identifier>CODEN: SCTEEJ</identifier><language>eng</language><publisher>Lausanne: Elsevier B.V</publisher><subject>Copper ; Cross-disciplinary physics: materials science; rheology ; Cuprous oxide ; Electrodeposition, electroplating ; Exact sciences and technology ; Materials science ; Methods of deposition of films and coatings; film growth and epitaxy ; Physics ; Physics of gases, plasmas and electric discharges ; Physics of plasmas and electric discharges ; Plasma applications ; Plasma spraying ; Tungsten</subject><ispartof>Surface & coatings technology, 2004-04, Vol.182 (1), p.124-130</ispartof><rights>2003 Elsevier B.V.</rights><rights>2004 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c408t-de10fe647ce49811d2558e0d25e120f01d101c4352db967abb4cb50138098a173</citedby><cites>FETCH-LOGICAL-c408t-de10fe647ce49811d2558e0d25e120f01d101c4352db967abb4cb50138098a173</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.surfcoat.2003.08.055$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=15663030$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Kang, Hyun-Ki</creatorcontrib><creatorcontrib>Bong Kang, Suk</creatorcontrib><title>Effect of feedstock injection methods on oxidation behavior and microstructure of plasma sprayed W/Cu composites</title><title>Surface & coatings technology</title><description>Free-standing tungsten/copper composite plates that may be used as heat sink material for electronic packaging were produced by the air plasma spray process. Two kinds of spray torch were used to investigate the oxidation, microstructure, composition recovery, and coefficient of thermal expansion (CTE) with respect to internal feedstock injection (IFI) and external feedstock injection (EFI). Very little copper oxidation from the IFI was detected by XRD analysis. Most pores were found in the vicinity of tungsten-rich grains. More tungsten in the deposits was lost in the use of the EFI than with IFI. Thermal expansion coefficient of plasma sprayed composite (72W/28Cu vol.%) was approximately 5.2×10
−6/K. The experimental results indicated that the IFI shows higher energy efficiency for the tungsten recovery than the EFI. Some detailed observations of microstructures are also discussed.</description><subject>Copper</subject><subject>Cross-disciplinary physics: materials science; rheology</subject><subject>Cuprous oxide</subject><subject>Electrodeposition, electroplating</subject><subject>Exact sciences and technology</subject><subject>Materials science</subject><subject>Methods of deposition of films and coatings; film growth and epitaxy</subject><subject>Physics</subject><subject>Physics of gases, plasmas and electric discharges</subject><subject>Physics of plasmas and electric discharges</subject><subject>Plasma applications</subject><subject>Plasma spraying</subject><subject>Tungsten</subject><issn>0257-8972</issn><issn>1879-3347</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2004</creationdate><recordtype>article</recordtype><recordid>eNqFkEFv1DAQhS0EEsu2fwH5Arek48RJnBtoVaBSJS5UPVqOPVa9JHHwJBX993jZIo7VHGY0ejNP72PsvYBSgGivjiVtydto1rICqEtQJTTNK7YTquuLupbda7aDqukK1XfVW_aO6AgAouvlji3X3qNdefTcIzpao_3Jw3zMuxBnPuH6EB3xPMbfwZm_ywEfzGOIiZvZ8SnYFGlNm123hKc_y2hoMpyWZJ7Q8furw8ZtnJZIYUW6YG-8GQkvn_ue3X25_nH4Vtx-_3pz-HxbWAlqLRwK8NjKzqLslRCuahqFkBuKCjwIl7NbWTeVG_q2M8Mg7dCAqBX0yoiu3rOP579Lir82pFVPgSyOo5kxbqQrJVoplczC9iw85aCEXi8pTCY9aQH6BFgf9T_A-gRYg9IZcD788OxgyJrRJzPbQP-vm7atIdeefTrrMMd9DJg02YCzRRdSxqxdDC9Z_QEiXJal</recordid><startdate>20040401</startdate><enddate>20040401</enddate><creator>Kang, Hyun-Ki</creator><creator>Bong Kang, Suk</creator><general>Elsevier B.V</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>8BQ</scope><scope>8FD</scope><scope>H8G</scope><scope>JG9</scope></search><sort><creationdate>20040401</creationdate><title>Effect of feedstock injection methods on oxidation behavior and microstructure of plasma sprayed W/Cu composites</title><author>Kang, Hyun-Ki ; Bong Kang, Suk</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c408t-de10fe647ce49811d2558e0d25e120f01d101c4352db967abb4cb50138098a173</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2004</creationdate><topic>Copper</topic><topic>Cross-disciplinary physics: materials science; rheology</topic><topic>Cuprous oxide</topic><topic>Electrodeposition, electroplating</topic><topic>Exact sciences and technology</topic><topic>Materials science</topic><topic>Methods of deposition of films and coatings; film growth and epitaxy</topic><topic>Physics</topic><topic>Physics of gases, plasmas and electric discharges</topic><topic>Physics of plasmas and electric discharges</topic><topic>Plasma applications</topic><topic>Plasma spraying</topic><topic>Tungsten</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Kang, Hyun-Ki</creatorcontrib><creatorcontrib>Bong Kang, Suk</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Copper Technical Reference Library</collection><collection>Materials Research Database</collection><jtitle>Surface & coatings technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Kang, Hyun-Ki</au><au>Bong Kang, Suk</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Effect of feedstock injection methods on oxidation behavior and microstructure of plasma sprayed W/Cu composites</atitle><jtitle>Surface & coatings technology</jtitle><date>2004-04-01</date><risdate>2004</risdate><volume>182</volume><issue>1</issue><spage>124</spage><epage>130</epage><pages>124-130</pages><issn>0257-8972</issn><eissn>1879-3347</eissn><coden>SCTEEJ</coden><abstract>Free-standing tungsten/copper composite plates that may be used as heat sink material for electronic packaging were produced by the air plasma spray process. Two kinds of spray torch were used to investigate the oxidation, microstructure, composition recovery, and coefficient of thermal expansion (CTE) with respect to internal feedstock injection (IFI) and external feedstock injection (EFI). Very little copper oxidation from the IFI was detected by XRD analysis. Most pores were found in the vicinity of tungsten-rich grains. More tungsten in the deposits was lost in the use of the EFI than with IFI. Thermal expansion coefficient of plasma sprayed composite (72W/28Cu vol.%) was approximately 5.2×10
−6/K. The experimental results indicated that the IFI shows higher energy efficiency for the tungsten recovery than the EFI. Some detailed observations of microstructures are also discussed.</abstract><cop>Lausanne</cop><pub>Elsevier B.V</pub><doi>10.1016/j.surfcoat.2003.08.055</doi><tpages>7</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0257-8972 |
ispartof | Surface & coatings technology, 2004-04, Vol.182 (1), p.124-130 |
issn | 0257-8972 1879-3347 |
language | eng |
recordid | cdi_proquest_miscellaneous_28164484 |
source | Access via ScienceDirect (Elsevier) |
subjects | Copper Cross-disciplinary physics: materials science rheology Cuprous oxide Electrodeposition, electroplating Exact sciences and technology Materials science Methods of deposition of films and coatings film growth and epitaxy Physics Physics of gases, plasmas and electric discharges Physics of plasmas and electric discharges Plasma applications Plasma spraying Tungsten |
title | Effect of feedstock injection methods on oxidation behavior and microstructure of plasma sprayed W/Cu composites |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-19T04%3A08%3A25IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Effect%20of%20feedstock%20injection%20methods%20on%20oxidation%20behavior%20and%20microstructure%20of%20plasma%20sprayed%20W/Cu%20composites&rft.jtitle=Surface%20&%20coatings%20technology&rft.au=Kang,%20Hyun-Ki&rft.date=2004-04-01&rft.volume=182&rft.issue=1&rft.spage=124&rft.epage=130&rft.pages=124-130&rft.issn=0257-8972&rft.eissn=1879-3347&rft.coden=SCTEEJ&rft_id=info:doi/10.1016/j.surfcoat.2003.08.055&rft_dat=%3Cproquest_cross%3E28164484%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=28164484&rft_id=info:pmid/&rft_els_id=S025789720300954X&rfr_iscdi=true |