Structure and mechanical properties of poly( d, l-lactic acid)/poly( ε-caprolactone) blends
A series of blends of the biodegradable polymers poly( d, l-lactic acid) and poly( ε-caprolactone) were prepared by varying mass fraction across the range of compositions. Tensile testing was performed at room temperature using an extensometer and the elastic modulus was calculated for each blend. T...
Gespeichert in:
Veröffentlicht in: | Biomaterials 2003-10, Vol.24 (23), p.4181-4190 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 4190 |
---|---|
container_issue | 23 |
container_start_page | 4181 |
container_title | Biomaterials |
container_volume | 24 |
creator | Broz, M.E. VanderHart, D.L. Washburn, N.R. |
description | A series of blends of the biodegradable polymers poly(
d,
l-lactic acid) and poly(
ε-caprolactone) were prepared by varying mass fraction across the range of compositions. Tensile testing was performed at room temperature using an extensometer and the elastic modulus was calculated for each blend. The blends were also tested to failure, and the strain-at-failure and yield stress recorded. While the blend has been shown to have a lower critical solution temperature, the mechanical properties were insensitive to the annealing conditions. Scanning electron microscopy was used to characterize the blend microstructure and poor adhesion was observed at the interface between blend components. Differential scanning calorimetry was performed but the results were somewhat variable, indicating this blend may have complex phase behavior that depends sensitively on the method of preparation. However, nuclear magnetic resonance data indicate the two components are phase separated. A percolation model is used to explain the observed mechanical data and the results are consistent with the predictions of the Kerner–Uemura–Takayangi model. The results of these experiments demonstrate the utility of polymer blending in tuning material properties. |
doi_str_mv | 10.1016/S0142-9612(03)00314-4 |
format | Article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_28020950</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0142961203003144</els_id><sourcerecordid>28011401</sourcerecordid><originalsourceid>FETCH-LOGICAL-c541t-db654d2e4955ee586a7cae17aa7c3bbffcbe787acb69d1aa4136fa539be92f9f3</originalsourceid><addsrcrecordid>eNqNkc9KxDAQh4Mo7rr6CEpOsgvWTdKkTU8i4j9Y8KDehJAmU4x02zVpBR_M1_CZzNpFj3oakny_mTAfQoeUnFJCs_k9oZwlRUbZlKQzQlLKE76FxlTmMhEFEdto_IOM0F4ILySeCWe7aESZFCnjcoye7jvfm673gHVj8RLMs26c0TVe-XYFvnMQcFvhVVu_T7E9wXVSa9M5g7VxdjYf7j8_EqNjYP3UNjDDZQ2NDftop9J1gINNnaDHq8uHi5tkcXd9e3G-SIzgtEtsmQluGfBCCAAhM50bDTTXsaZlWVWmhFzm2pRZYanWnKZZpUValFCwqqjSCToe-sYvvPYQOrV0wUBd6wbaPigmCSOFIP8BadwR_ROkUhIRm0ZQDKDxbQgeKrXybqn9u6JErUWpb1FqbUGRVH2LUjzmjjYD-nIJ9je1MROBswGAuLg3B14F46AxYJ0H0ynbuj9GfAFB6KNX</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>18805020</pqid></control><display><type>article</type><title>Structure and mechanical properties of poly( d, l-lactic acid)/poly( ε-caprolactone) blends</title><source>MEDLINE</source><source>Elsevier ScienceDirect Journals Complete</source><creator>Broz, M.E. ; VanderHart, D.L. ; Washburn, N.R.</creator><creatorcontrib>Broz, M.E. ; VanderHart, D.L. ; Washburn, N.R.</creatorcontrib><description>A series of blends of the biodegradable polymers poly(
d,
l-lactic acid) and poly(
ε-caprolactone) were prepared by varying mass fraction across the range of compositions. Tensile testing was performed at room temperature using an extensometer and the elastic modulus was calculated for each blend. The blends were also tested to failure, and the strain-at-failure and yield stress recorded. While the blend has been shown to have a lower critical solution temperature, the mechanical properties were insensitive to the annealing conditions. Scanning electron microscopy was used to characterize the blend microstructure and poor adhesion was observed at the interface between blend components. Differential scanning calorimetry was performed but the results were somewhat variable, indicating this blend may have complex phase behavior that depends sensitively on the method of preparation. However, nuclear magnetic resonance data indicate the two components are phase separated. A percolation model is used to explain the observed mechanical data and the results are consistent with the predictions of the Kerner–Uemura–Takayangi model. The results of these experiments demonstrate the utility of polymer blending in tuning material properties.</description><identifier>ISSN: 0142-9612</identifier><identifier>EISSN: 1878-5905</identifier><identifier>DOI: 10.1016/S0142-9612(03)00314-4</identifier><identifier>PMID: 12853248</identifier><language>eng</language><publisher>Netherlands: Elsevier Ltd</publisher><subject>Biocompatible Materials - chemistry ; Calorimetry, Differential Scanning ; Lactic Acid - chemistry ; Magnetic Resonance Spectroscopy ; Mechanical properties ; Microscopy, Electron ; Microscopy, Electron, Scanning ; Microstructure ; Polycaprolactone ; Polyesters - chemistry ; Polylactic acid ; Polymers - chemistry ; Stress, Mechanical ; Temperature ; Tissue Adhesions</subject><ispartof>Biomaterials, 2003-10, Vol.24 (23), p.4181-4190</ispartof><rights>2003</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c541t-db654d2e4955ee586a7cae17aa7c3bbffcbe787acb69d1aa4136fa539be92f9f3</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/S0142-9612(03)00314-4$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids><backlink>$$Uhttps://www.ncbi.nlm.nih.gov/pubmed/12853248$$D View this record in MEDLINE/PubMed$$Hfree_for_read</backlink></links><search><creatorcontrib>Broz, M.E.</creatorcontrib><creatorcontrib>VanderHart, D.L.</creatorcontrib><creatorcontrib>Washburn, N.R.</creatorcontrib><title>Structure and mechanical properties of poly( d, l-lactic acid)/poly( ε-caprolactone) blends</title><title>Biomaterials</title><addtitle>Biomaterials</addtitle><description>A series of blends of the biodegradable polymers poly(
d,
l-lactic acid) and poly(
ε-caprolactone) were prepared by varying mass fraction across the range of compositions. Tensile testing was performed at room temperature using an extensometer and the elastic modulus was calculated for each blend. The blends were also tested to failure, and the strain-at-failure and yield stress recorded. While the blend has been shown to have a lower critical solution temperature, the mechanical properties were insensitive to the annealing conditions. Scanning electron microscopy was used to characterize the blend microstructure and poor adhesion was observed at the interface between blend components. Differential scanning calorimetry was performed but the results were somewhat variable, indicating this blend may have complex phase behavior that depends sensitively on the method of preparation. However, nuclear magnetic resonance data indicate the two components are phase separated. A percolation model is used to explain the observed mechanical data and the results are consistent with the predictions of the Kerner–Uemura–Takayangi model. The results of these experiments demonstrate the utility of polymer blending in tuning material properties.</description><subject>Biocompatible Materials - chemistry</subject><subject>Calorimetry, Differential Scanning</subject><subject>Lactic Acid - chemistry</subject><subject>Magnetic Resonance Spectroscopy</subject><subject>Mechanical properties</subject><subject>Microscopy, Electron</subject><subject>Microscopy, Electron, Scanning</subject><subject>Microstructure</subject><subject>Polycaprolactone</subject><subject>Polyesters - chemistry</subject><subject>Polylactic acid</subject><subject>Polymers - chemistry</subject><subject>Stress, Mechanical</subject><subject>Temperature</subject><subject>Tissue Adhesions</subject><issn>0142-9612</issn><issn>1878-5905</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2003</creationdate><recordtype>article</recordtype><sourceid>EIF</sourceid><recordid>eNqNkc9KxDAQh4Mo7rr6CEpOsgvWTdKkTU8i4j9Y8KDehJAmU4x02zVpBR_M1_CZzNpFj3oakny_mTAfQoeUnFJCs_k9oZwlRUbZlKQzQlLKE76FxlTmMhEFEdto_IOM0F4ILySeCWe7aESZFCnjcoye7jvfm673gHVj8RLMs26c0TVe-XYFvnMQcFvhVVu_T7E9wXVSa9M5g7VxdjYf7j8_EqNjYP3UNjDDZQ2NDftop9J1gINNnaDHq8uHi5tkcXd9e3G-SIzgtEtsmQluGfBCCAAhM50bDTTXsaZlWVWmhFzm2pRZYanWnKZZpUValFCwqqjSCToe-sYvvPYQOrV0wUBd6wbaPigmCSOFIP8BadwR_ROkUhIRm0ZQDKDxbQgeKrXybqn9u6JErUWpb1FqbUGRVH2LUjzmjjYD-nIJ9je1MROBswGAuLg3B14F46AxYJ0H0ynbuj9GfAFB6KNX</recordid><startdate>20031001</startdate><enddate>20031001</enddate><creator>Broz, M.E.</creator><creator>VanderHart, D.L.</creator><creator>Washburn, N.R.</creator><general>Elsevier Ltd</general><scope>CGR</scope><scope>CUY</scope><scope>CVF</scope><scope>ECM</scope><scope>EIF</scope><scope>NPM</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7QO</scope><scope>8FD</scope><scope>FR3</scope><scope>P64</scope><scope>7SR</scope><scope>JG9</scope><scope>F28</scope></search><sort><creationdate>20031001</creationdate><title>Structure and mechanical properties of poly( d, l-lactic acid)/poly( ε-caprolactone) blends</title><author>Broz, M.E. ; VanderHart, D.L. ; Washburn, N.R.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c541t-db654d2e4955ee586a7cae17aa7c3bbffcbe787acb69d1aa4136fa539be92f9f3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2003</creationdate><topic>Biocompatible Materials - chemistry</topic><topic>Calorimetry, Differential Scanning</topic><topic>Lactic Acid - chemistry</topic><topic>Magnetic Resonance Spectroscopy</topic><topic>Mechanical properties</topic><topic>Microscopy, Electron</topic><topic>Microscopy, Electron, Scanning</topic><topic>Microstructure</topic><topic>Polycaprolactone</topic><topic>Polyesters - chemistry</topic><topic>Polylactic acid</topic><topic>Polymers - chemistry</topic><topic>Stress, Mechanical</topic><topic>Temperature</topic><topic>Tissue Adhesions</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Broz, M.E.</creatorcontrib><creatorcontrib>VanderHart, D.L.</creatorcontrib><creatorcontrib>Washburn, N.R.</creatorcontrib><collection>Medline</collection><collection>MEDLINE</collection><collection>MEDLINE (Ovid)</collection><collection>MEDLINE</collection><collection>MEDLINE</collection><collection>PubMed</collection><collection>CrossRef</collection><collection>Biotechnology Research Abstracts</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Biotechnology and BioEngineering Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>Materials Research Database</collection><collection>ANTE: Abstracts in New Technology & Engineering</collection><jtitle>Biomaterials</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Broz, M.E.</au><au>VanderHart, D.L.</au><au>Washburn, N.R.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Structure and mechanical properties of poly( d, l-lactic acid)/poly( ε-caprolactone) blends</atitle><jtitle>Biomaterials</jtitle><addtitle>Biomaterials</addtitle><date>2003-10-01</date><risdate>2003</risdate><volume>24</volume><issue>23</issue><spage>4181</spage><epage>4190</epage><pages>4181-4190</pages><issn>0142-9612</issn><eissn>1878-5905</eissn><abstract>A series of blends of the biodegradable polymers poly(
d,
l-lactic acid) and poly(
ε-caprolactone) were prepared by varying mass fraction across the range of compositions. Tensile testing was performed at room temperature using an extensometer and the elastic modulus was calculated for each blend. The blends were also tested to failure, and the strain-at-failure and yield stress recorded. While the blend has been shown to have a lower critical solution temperature, the mechanical properties were insensitive to the annealing conditions. Scanning electron microscopy was used to characterize the blend microstructure and poor adhesion was observed at the interface between blend components. Differential scanning calorimetry was performed but the results were somewhat variable, indicating this blend may have complex phase behavior that depends sensitively on the method of preparation. However, nuclear magnetic resonance data indicate the two components are phase separated. A percolation model is used to explain the observed mechanical data and the results are consistent with the predictions of the Kerner–Uemura–Takayangi model. The results of these experiments demonstrate the utility of polymer blending in tuning material properties.</abstract><cop>Netherlands</cop><pub>Elsevier Ltd</pub><pmid>12853248</pmid><doi>10.1016/S0142-9612(03)00314-4</doi><tpages>10</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0142-9612 |
ispartof | Biomaterials, 2003-10, Vol.24 (23), p.4181-4190 |
issn | 0142-9612 1878-5905 |
language | eng |
recordid | cdi_proquest_miscellaneous_28020950 |
source | MEDLINE; Elsevier ScienceDirect Journals Complete |
subjects | Biocompatible Materials - chemistry Calorimetry, Differential Scanning Lactic Acid - chemistry Magnetic Resonance Spectroscopy Mechanical properties Microscopy, Electron Microscopy, Electron, Scanning Microstructure Polycaprolactone Polyesters - chemistry Polylactic acid Polymers - chemistry Stress, Mechanical Temperature Tissue Adhesions |
title | Structure and mechanical properties of poly( d, l-lactic acid)/poly( ε-caprolactone) blends |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-24T03%3A24%3A07IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Structure%20and%20mechanical%20properties%20of%20poly(%20d,%20l-lactic%20acid)/poly(%20%CE%B5-caprolactone)%20blends&rft.jtitle=Biomaterials&rft.au=Broz,%20M.E.&rft.date=2003-10-01&rft.volume=24&rft.issue=23&rft.spage=4181&rft.epage=4190&rft.pages=4181-4190&rft.issn=0142-9612&rft.eissn=1878-5905&rft_id=info:doi/10.1016/S0142-9612(03)00314-4&rft_dat=%3Cproquest_cross%3E28011401%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=18805020&rft_id=info:pmid/12853248&rft_els_id=S0142961203003144&rfr_iscdi=true |