Kinetic and equilibrium modeling of liquid-phase adsorption of lead and lead chelates on activated carbons

The sawdust (SD) waste generated in the timber industry was converted to a low‐cost activated carbon (SDAC) using a simpler and cheaper activation process, single‐step steam pyrolysis activation. The possibility of utilizing SDAC for the removal of lead (Pb(II)) in the absence of ligands and nitrilotriacetic acid (NTA) and ethylenediaminetetraacetic acid (EDTA) chelated Pb(II) complexes from the liquid phase was examined and the results were compared with those for commercial activated carbon (CAC). SDAC shows a high adsorption capacity for Pb(II) and Pb(II) chelates compared with CAC. The extent of adsorption of Pb(II) and Pb(II) chelates on activated carbons was found to be a function of solution pH and species distribution of Pb(II) and Pb(II) chelates. The optimum pH range for the removal of Pb(II) in the absence of ligands by SDAC was 6.5–8.0, whereas its maximum removal by CAC was observed at pH 6.5. In the presence of ligands, the extent of Pb(II) adsorption was enhanced in the pH range 2.0–5.0 and was reduced significantly in the pH range 6.0–8.0. The maximum uptake of Pb(II) chelates for both carbons was observed at pH 5.0. Kinetic models such as pseudo‐first‐order, pseudo‐second‐order and pore diffusion were tested to investigate the adsorption mechanism. Batch kinetic studies showed that the adsorption of Pb(II) from aqueous solutions with and without ligands could be best described by a psuedo‐first‐order model for both carbons. The effect of pH on the adsorption isotherms of Pb(II) and Pb(II) chelates was also investigated. The applicability of the Langmuir and Freundlich isotherms, established for various initial concentrations of the adsorbate and for different pH values, was tested at 30 °C. Copyright © 2003 Society of Chemical Industry