The Press Formability in Magnesium Alloy AZ31
Formability on cylindrical deep drawing and mechanical properties at relatively low temperature was investigated for a commercially rolled AZ31 magnesium. A small punch radius, which ratio to thickness was 2.5, was adopted intentionally. At room temperature, brittle fracture occurred near the flat p...
Gespeichert in:
| Veröffentlicht in: | Materials science forum 2000-08, Vol.350-351, p.177-182 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 182 |
|---|---|
| container_issue | |
| container_start_page | 177 |
| container_title | Materials science forum |
| container_volume | 350-351 |
| creator | Kohzu, Masahide Higashi, Kenji Tanabe, S. Somekawa, Hidetoshi |
| description | Formability on cylindrical deep drawing and mechanical properties at relatively low temperature was investigated for a commercially rolled AZ31 magnesium. A small punch radius, which ratio to thickness was 2.5, was adopted intentionally. At room temperature, brittle fracture occurred near the flat portion of punch shoulder like as blanking. The ratio of drawing rate to punch diameter was from 5 to 200 mm/min. The drawing ratio of 1.67 was obtained at 383 K, and limiting drawing ratio of 2.2 was obtained at 453 K. |
| doi_str_mv | 10.4028/www.scientific.net/MSF.350-351.177 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_27765172</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>27765172</sourcerecordid><originalsourceid>FETCH-LOGICAL-c463t-21606f554aaa45ed92715da38bc8171263211a2e2d4abc18aaed2f96a8d6cc1e3</originalsourceid><addsrcrecordid>eNqV0E1Lw0AQBuDFD7DW_oeA4EFI3NlkP3KsH1WhRcF68bJMNxu7kia6m1L6711p0bOHYQ7z8g48hFwCzQrK1NVms8mCcbbtXe1M1tr-avYyyXJO05xDBlIekAEIwdJScnZIRqVUVElVlEowdUQGlHGe8kKKE3IawgelOSgQA5LOlzZ59jaEZNL5FS5c4_pt4tpkhu-tDW69SsZN022T8VsOZ-S4xibY0X4Pyevkbn7zkE6f7h9vxtPUFCLvUwaCiprzAhELbquSSeAV5mphFEhgImcAyCyrClwYUIi2YnUpUFXCGLD5kFzsej9997W2odcrF4xtGmxttw6aSSk4SBaD17ug8V0I3tb607sV-q0Gqn_kdJTTf3I6yukop6NcHNBRLpac779hMNjUHlvjwm-TlKqUIqZud6k-3kNvzVJ_dGvfRof_PPsGN0iKEQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>27765172</pqid></control><display><type>article</type><title>The Press Formability in Magnesium Alloy AZ31</title><source>Scientific.net Journals</source><creator>Kohzu, Masahide ; Higashi, Kenji ; Tanabe, S. ; Somekawa, Hidetoshi</creator><creatorcontrib>Kohzu, Masahide ; Higashi, Kenji ; Tanabe, S. ; Somekawa, Hidetoshi</creatorcontrib><description>Formability on cylindrical deep drawing and mechanical properties at relatively low temperature was investigated for a commercially rolled AZ31 magnesium. A small punch radius, which ratio to thickness was 2.5, was adopted intentionally. At room temperature, brittle fracture occurred near the flat portion of punch shoulder like as blanking. The ratio of drawing rate to punch diameter was from 5 to 200 mm/min. The drawing ratio of 1.67 was obtained at 383 K, and limiting drawing ratio of 2.2 was obtained at 453 K.</description><identifier>ISSN: 0255-5476</identifier><identifier>ISSN: 1662-9752</identifier><identifier>ISBN: 9780878498628</identifier><identifier>ISBN: 0878498621</identifier><identifier>EISSN: 1662-9752</identifier><identifier>DOI: 10.4028/www.scientific.net/MSF.350-351.177</identifier><identifier>CODEN: MSFOEP</identifier><language>eng</language><publisher>Aedermannsdorf: Trans Tech Publications Ltd</publisher><subject>Applied sciences ; Exact sciences and technology ; Forming ; Metals. Metallurgy ; Press forming of metal foils and wires ; Production techniques</subject><ispartof>Materials science forum, 2000-08, Vol.350-351, p.177-182</ispartof><rights>2000 Trans Tech Publications Ltd</rights><rights>2001 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c463t-21606f554aaa45ed92715da38bc8171263211a2e2d4abc18aaed2f96a8d6cc1e3</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Uhttps://www.scientific.net/Image/TitleCover/412?width=600</thumbnail><link.rule.ids>309,310,314,778,782,787,788,27907,27908</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=778976$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Kohzu, Masahide</creatorcontrib><creatorcontrib>Higashi, Kenji</creatorcontrib><creatorcontrib>Tanabe, S.</creatorcontrib><creatorcontrib>Somekawa, Hidetoshi</creatorcontrib><title>The Press Formability in Magnesium Alloy AZ31</title><title>Materials science forum</title><description>Formability on cylindrical deep drawing and mechanical properties at relatively low temperature was investigated for a commercially rolled AZ31 magnesium. A small punch radius, which ratio to thickness was 2.5, was adopted intentionally. At room temperature, brittle fracture occurred near the flat portion of punch shoulder like as blanking. The ratio of drawing rate to punch diameter was from 5 to 200 mm/min. The drawing ratio of 1.67 was obtained at 383 K, and limiting drawing ratio of 2.2 was obtained at 453 K.</description><subject>Applied sciences</subject><subject>Exact sciences and technology</subject><subject>Forming</subject><subject>Metals. Metallurgy</subject><subject>Press forming of metal foils and wires</subject><subject>Production techniques</subject><issn>0255-5476</issn><issn>1662-9752</issn><issn>1662-9752</issn><isbn>9780878498628</isbn><isbn>0878498621</isbn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2000</creationdate><recordtype>article</recordtype><recordid>eNqV0E1Lw0AQBuDFD7DW_oeA4EFI3NlkP3KsH1WhRcF68bJMNxu7kia6m1L6711p0bOHYQ7z8g48hFwCzQrK1NVms8mCcbbtXe1M1tr-avYyyXJO05xDBlIekAEIwdJScnZIRqVUVElVlEowdUQGlHGe8kKKE3IawgelOSgQA5LOlzZ59jaEZNL5FS5c4_pt4tpkhu-tDW69SsZN022T8VsOZ-S4xibY0X4Pyevkbn7zkE6f7h9vxtPUFCLvUwaCiprzAhELbquSSeAV5mphFEhgImcAyCyrClwYUIi2YnUpUFXCGLD5kFzsej9997W2odcrF4xtGmxttw6aSSk4SBaD17ug8V0I3tb607sV-q0Gqn_kdJTTf3I6yukop6NcHNBRLpac779hMNjUHlvjwm-TlKqUIqZud6k-3kNvzVJ_dGvfRof_PPsGN0iKEQ</recordid><startdate>200008</startdate><enddate>200008</enddate><creator>Kohzu, Masahide</creator><creator>Higashi, Kenji</creator><creator>Tanabe, S.</creator><creator>Somekawa, Hidetoshi</creator><general>Trans Tech Publications Ltd</general><general>Trans Tech Publications</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>200008</creationdate><title>The Press Formability in Magnesium Alloy AZ31</title><author>Kohzu, Masahide ; Higashi, Kenji ; Tanabe, S. ; Somekawa, Hidetoshi</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c463t-21606f554aaa45ed92715da38bc8171263211a2e2d4abc18aaed2f96a8d6cc1e3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2000</creationdate><topic>Applied sciences</topic><topic>Exact sciences and technology</topic><topic>Forming</topic><topic>Metals. Metallurgy</topic><topic>Press forming of metal foils and wires</topic><topic>Production techniques</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Kohzu, Masahide</creatorcontrib><creatorcontrib>Higashi, Kenji</creatorcontrib><creatorcontrib>Tanabe, S.</creatorcontrib><creatorcontrib>Somekawa, Hidetoshi</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Materials science forum</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Kohzu, Masahide</au><au>Higashi, Kenji</au><au>Tanabe, S.</au><au>Somekawa, Hidetoshi</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>The Press Formability in Magnesium Alloy AZ31</atitle><jtitle>Materials science forum</jtitle><date>2000-08</date><risdate>2000</risdate><volume>350-351</volume><spage>177</spage><epage>182</epage><pages>177-182</pages><issn>0255-5476</issn><issn>1662-9752</issn><eissn>1662-9752</eissn><isbn>9780878498628</isbn><isbn>0878498621</isbn><coden>MSFOEP</coden><abstract>Formability on cylindrical deep drawing and mechanical properties at relatively low temperature was investigated for a commercially rolled AZ31 magnesium. A small punch radius, which ratio to thickness was 2.5, was adopted intentionally. At room temperature, brittle fracture occurred near the flat portion of punch shoulder like as blanking. The ratio of drawing rate to punch diameter was from 5 to 200 mm/min. The drawing ratio of 1.67 was obtained at 383 K, and limiting drawing ratio of 2.2 was obtained at 453 K.</abstract><cop>Aedermannsdorf</cop><pub>Trans Tech Publications Ltd</pub><doi>10.4028/www.scientific.net/MSF.350-351.177</doi><tpages>6</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0255-5476 |
| ispartof | Materials science forum, 2000-08, Vol.350-351, p.177-182 |
| issn | 0255-5476 1662-9752 1662-9752 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_27765172 |
| source | Scientific.net Journals |
| subjects | Applied sciences Exact sciences and technology Forming Metals. Metallurgy Press forming of metal foils and wires Production techniques |
| title | The Press Formability in Magnesium Alloy AZ31 |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-16T18%3A46%3A34IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=The%20Press%20Formability%20in%20Magnesium%20Alloy%20AZ31&rft.jtitle=Materials%20science%20forum&rft.au=Kohzu,%20Masahide&rft.date=2000-08&rft.volume=350-351&rft.spage=177&rft.epage=182&rft.pages=177-182&rft.issn=0255-5476&rft.eissn=1662-9752&rft.isbn=9780878498628&rft.isbn_list=0878498621&rft.coden=MSFOEP&rft_id=info:doi/10.4028/www.scientific.net/MSF.350-351.177&rft_dat=%3Cproquest_cross%3E27765172%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=27765172&rft_id=info:pmid/&rfr_iscdi=true |