Effect of nitrogen on the temperature dependence of the yield strength of austenitic steels

The temperature dependence of the yield strength Rp0.2 in the range of 4–300 K is studied on Cr18Ni16Mn10 steel alloyed with nitrogen or carbon or having no interstitials introduced purposefully. A striking increase of the yield strength of nitrogen steel was observed at temperatures below 100 K in accordance with previous results. The temperature dependence of stacking fault energy (SFE) in the range 300–130 K was measured by means of transmission electron microscopy and it was shown that nitrogen causes a sharp decrease of the SFE with decreasing temperature while no marked temperature dependence of the SFE was observed in carbon steel. Samples of the studied steels were deformed by tension at 77 K and their dislocation structure was studied at room temperature. Tangled dislocations were observed in N(C)-free and C-alloyed austenites while the obvious splitting of dislocations occurred in the nitrogen one. This result was attributed to the low SFE in nitrogen austenite at 77 K and an effect of interstitial atoms segregated on split dislocations during low temperature plastic deformation, keeping the splitting after deformation and heating to room temperature. The effect of nitrogen on SFE is explained based on the results of the studies of electron structure of nitrogen austenitic steels and it is attributed to an increase in the density of states at the Fermi surface due to nitrogen. The results obtained enable one to interpret the nitrogen effect on the yield strength of austenitic steel within the framework of Seeger's theory. La variation de la limite d'élasticité Rp0.2 avec la température est étudiéé entre 4 et 300 K dans les aciers Cr18Ni16Mn10 alliés ou non aux interstitiels carbone ou azote. Une augmentation marquée de Rp0.2 est observée en dessous de 100 K conformément à des résultats précédents. La dépendance de l'énergie de faute d'empilement (SFE) entre 300 et 130 K mesurée par microscopie électronique en transmission a montré que l'azote provoque une forte diminution de SFE lorsque la température diminue alors que le carbone ne conduit à aucune variation marquée avec la température. Les structures de dislocation des aciers déformés par traction à 77 K ont été étudiées à température ambiante. Alors que des enchevêtrements de dislocations sont observés en l'absense d'azote, avec l'azote la dissociation est évidente. Ce résultat est attribué à l'abaissement de SFE par l'azote à basse température et l'épinglage par l'azote des dislocations parti