Experiences with stationary and mobile calibration laboratories
Publication IEC 60060-2 recommends the requirements on the measuring equipment of high voltage laboratories. The operators of the laboratory have to assure that the measuring uncertainties stay within the prescribed limits. The inspections are preferably done by an accredited laboratory through comp...
Gespeichert in:
| Hauptverfasser: | , |
|---|---|
| Format: | Tagungsbericht |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 1.192.P4 |
|---|---|
| container_issue | |
| container_start_page | 1.189.P4 |
| container_title | |
| container_volume | |
| creator | Karius, V Yimvuthikul, S |
| description | Publication IEC 60060-2 recommends the requirements on the measuring equipment of high voltage laboratories. The operators of the laboratory have to assure that the measuring uncertainties stay within the prescribed limits. The inspections are preferably done by an accredited laboratory through comparison with a reference measuring system which is traceable to national standards. A high voltage calibration laboratory is illustrated, which can be operated either stationary in a high voltage laboratory or mobile on-site. The type of equipment and the necessary procedures for the performance checks and tests are described. The experiences after two years of operation are summarised. Moreover the operating costs and recalibration intervals are commented upon. (4 pages) |
| doi_str_mv | 10.1049/cp:19990539 |
| format | Conference Proceeding |
| fullrecord | <record><control><sourceid>proquest_pasca</sourceid><recordid>TN_cdi_proquest_miscellaneous_27222332</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>27222332</sourcerecordid><originalsourceid>FETCH-LOGICAL-i952-dd2c451c8aa29d4cc71e315ebe988b7becafa41be9d05a4b9a3b6ec36b7b7ab73</originalsourceid><addsrcrecordid>eNo1UMlOwzAQtQRIlNITP5AD4oAU8BLXMReEqrJIlbj0bo2diTBK42CnAv6-pi1zme3NvJlHyBWjd4xW-t4ND0xrTaXQJ-SC1pLruWJanpJJrqlS61qfk1lKnzRbJZlgckIelz8DRo-9w1R8-_GjSCOMPvQQfwvom2ITrO-wcNB5G_edogMbchjyWLokZy10CWdHPyXr5-V68Vqu3l_eFk-r0mvJy6bhLjO6GoDrpnJOMcz0aFHXtVUWHbRQsZw2VEJlNQg7RyfmuafAKjElN4e1QwxfW0yj2fjksOugx7BNhivOuRA8A6-PQEj55jZC73wyQ_Sb_JFhTMn8fYbdHmAeR-NC32LcS2AYNX9qGjeYfzXFDqgRaIA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype><pqid>27222332</pqid></control><display><type>conference_proceeding</type><title>Experiences with stationary and mobile calibration laboratories</title><source>IEEE Electronic Library (IEL) Conference Proceedings</source><creator>Karius, V ; Yimvuthikul, S</creator><creatorcontrib>Karius, V ; Yimvuthikul, S</creatorcontrib><description>Publication IEC 60060-2 recommends the requirements on the measuring equipment of high voltage laboratories. The operators of the laboratory have to assure that the measuring uncertainties stay within the prescribed limits. The inspections are preferably done by an accredited laboratory through comparison with a reference measuring system which is traceable to national standards. A high voltage calibration laboratory is illustrated, which can be operated either stationary in a high voltage laboratory or mobile on-site. The type of equipment and the necessary procedures for the performance checks and tests are described. The experiences after two years of operation are summarised. Moreover the operating costs and recalibration intervals are commented upon. (4 pages)</description><identifier>ISSN: 0537-9989</identifier><identifier>ISBN: 0852967195</identifier><identifier>ISBN: 9780852967195</identifier><identifier>DOI: 10.1049/cp:19990539</identifier><identifier>CODEN: IECPB4</identifier><language>eng</language><publisher>London: IEE</publisher><subject>Applied sciences ; Electrical engineering. Electrical power engineering ; Exact sciences and technology ; Measurement standards and calibration ; Measurement theory ; Metrology ; Metrology, measurements and laboratory procedures ; Physics ; Testing. Reliability. Quality control ; Units and standards ; Voltage measurement</subject><ispartof>11th International Symposium on High-Voltage Engineering (ISH 99), 1999, p.1.189.P4-1.192.P4</ispartof><rights>2000 INIST-CNRS</rights><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>309,310,314,776,780,785,786,4036,4037,27901,27902</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=1175000$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Karius, V</creatorcontrib><creatorcontrib>Yimvuthikul, S</creatorcontrib><title>Experiences with stationary and mobile calibration laboratories</title><title>11th International Symposium on High-Voltage Engineering (ISH 99)</title><description>Publication IEC 60060-2 recommends the requirements on the measuring equipment of high voltage laboratories. The operators of the laboratory have to assure that the measuring uncertainties stay within the prescribed limits. The inspections are preferably done by an accredited laboratory through comparison with a reference measuring system which is traceable to national standards. A high voltage calibration laboratory is illustrated, which can be operated either stationary in a high voltage laboratory or mobile on-site. The type of equipment and the necessary procedures for the performance checks and tests are described. The experiences after two years of operation are summarised. Moreover the operating costs and recalibration intervals are commented upon. (4 pages)</description><subject>Applied sciences</subject><subject>Electrical engineering. Electrical power engineering</subject><subject>Exact sciences and technology</subject><subject>Measurement standards and calibration</subject><subject>Measurement theory</subject><subject>Metrology</subject><subject>Metrology, measurements and laboratory procedures</subject><subject>Physics</subject><subject>Testing. Reliability. Quality control</subject><subject>Units and standards</subject><subject>Voltage measurement</subject><issn>0537-9989</issn><isbn>0852967195</isbn><isbn>9780852967195</isbn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>1999</creationdate><recordtype>conference_proceeding</recordtype><recordid>eNo1UMlOwzAQtQRIlNITP5AD4oAU8BLXMReEqrJIlbj0bo2diTBK42CnAv6-pi1zme3NvJlHyBWjd4xW-t4ND0xrTaXQJ-SC1pLruWJanpJJrqlS61qfk1lKnzRbJZlgckIelz8DRo-9w1R8-_GjSCOMPvQQfwvom2ITrO-wcNB5G_edogMbchjyWLokZy10CWdHPyXr5-V68Vqu3l_eFk-r0mvJy6bhLjO6GoDrpnJOMcz0aFHXtVUWHbRQsZw2VEJlNQg7RyfmuafAKjElN4e1QwxfW0yj2fjksOugx7BNhivOuRA8A6-PQEj55jZC73wyQ_Sb_JFhTMn8fYbdHmAeR-NC32LcS2AYNX9qGjeYfzXFDqgRaIA</recordid><startdate>1999</startdate><enddate>1999</enddate><creator>Karius, V</creator><creator>Yimvuthikul, S</creator><general>IEE</general><scope>8ET</scope><scope>IQODW</scope><scope>7SP</scope><scope>8FD</scope><scope>L7M</scope></search><sort><creationdate>1999</creationdate><title>Experiences with stationary and mobile calibration laboratories</title><author>Karius, V ; Yimvuthikul, S</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-i952-dd2c451c8aa29d4cc71e315ebe988b7becafa41be9d05a4b9a3b6ec36b7b7ab73</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>1999</creationdate><topic>Applied sciences</topic><topic>Electrical engineering. Electrical power engineering</topic><topic>Exact sciences and technology</topic><topic>Measurement standards and calibration</topic><topic>Measurement theory</topic><topic>Metrology</topic><topic>Metrology, measurements and laboratory procedures</topic><topic>Physics</topic><topic>Testing. Reliability. Quality control</topic><topic>Units and standards</topic><topic>Voltage measurement</topic><toplevel>online_resources</toplevel><creatorcontrib>Karius, V</creatorcontrib><creatorcontrib>Yimvuthikul, S</creatorcontrib><collection>IET Conference Publications by volume</collection><collection>Pascal-Francis</collection><collection>Electronics & Communications Abstracts</collection><collection>Technology Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Karius, V</au><au>Yimvuthikul, S</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>Experiences with stationary and mobile calibration laboratories</atitle><btitle>11th International Symposium on High-Voltage Engineering (ISH 99)</btitle><date>1999</date><risdate>1999</risdate><spage>1.189.P4</spage><epage>1.192.P4</epage><pages>1.189.P4-1.192.P4</pages><issn>0537-9989</issn><isbn>0852967195</isbn><isbn>9780852967195</isbn><coden>IECPB4</coden><abstract>Publication IEC 60060-2 recommends the requirements on the measuring equipment of high voltage laboratories. The operators of the laboratory have to assure that the measuring uncertainties stay within the prescribed limits. The inspections are preferably done by an accredited laboratory through comparison with a reference measuring system which is traceable to national standards. A high voltage calibration laboratory is illustrated, which can be operated either stationary in a high voltage laboratory or mobile on-site. The type of equipment and the necessary procedures for the performance checks and tests are described. The experiences after two years of operation are summarised. Moreover the operating costs and recalibration intervals are commented upon. (4 pages)</abstract><cop>London</cop><pub>IEE</pub><doi>10.1049/cp:19990539</doi></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0537-9989 |
| ispartof | 11th International Symposium on High-Voltage Engineering (ISH 99), 1999, p.1.189.P4-1.192.P4 |
| issn | 0537-9989 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_27222332 |
| source | IEEE Electronic Library (IEL) Conference Proceedings |
| subjects | Applied sciences Electrical engineering. Electrical power engineering Exact sciences and technology Measurement standards and calibration Measurement theory Metrology Metrology, measurements and laboratory procedures Physics Testing. Reliability. Quality control Units and standards Voltage measurement |
| title | Experiences with stationary and mobile calibration laboratories |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-06T09%3A38%3A05IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_pasca&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=Experiences%20with%20stationary%20and%20mobile%20calibration%20laboratories&rft.btitle=11th%20International%20Symposium%20on%20High-Voltage%20Engineering%20(ISH%2099)&rft.au=Karius,%20V&rft.date=1999&rft.spage=1.189.P4&rft.epage=1.192.P4&rft.pages=1.189.P4-1.192.P4&rft.issn=0537-9989&rft.isbn=0852967195&rft.isbn_list=9780852967195&rft.coden=IECPB4&rft_id=info:doi/10.1049/cp:19990539&rft_dat=%3Cproquest_pasca%3E27222332%3C/proquest_pasca%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=27222332&rft_id=info:pmid/&rfr_iscdi=true |