Design and Control of a Force-Reflecting Haptic Interface for Teleoperational Grasping
In this paper the design of a multi-finger force-reflecting haptic interface device for teleoperational grasping is introduced. The haptic interface or “master” controller device is worn on the human operator’s hand and measured human finger positions are used to control the finger positions of a re...
Gespeichert in:
Veröffentlicht in: | Journal of mechanical design (1990) 2002-06, Vol.124 (2), p.277-283 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 283 |
---|---|
container_issue | 2 |
container_start_page | 277 |
container_title | Journal of mechanical design (1990) |
container_volume | 124 |
creator | Springer, Scott L Ferrier, Nicola J |
description | In this paper the design of a multi-finger force-reflecting haptic interface device for teleoperational grasping is introduced. The haptic interface or “master” controller device is worn on the human operator’s hand and measured human finger positions are used to control the finger positions of a remote grasping manipulator or “slave” device. The slave may be a physical robotic grasping manipulator, or a computer generated representation of a human hand such as used in virtual reality applications. The forces measured by the robotic slave, or calculated for the virtual slave, are presented to the operator’s fingertips through the master providing a means for deeper human sensation of presence and better control of grasping tasks in the slave environments. Design parameters and performance measures for haptic interfaces for teleoperation are discussed. One key performance issue involving the high-speed display of forces during initial contact, especially when interacting with rigid surfaces, is addressed by the present design, reducing slave controller computation requirements and overcoming actuator response time constraints. The design presented utilizes a planar four-bar linkage for each finger, to represent each finger bend motion as a single degree of freedom, and to provide a finger bend resistance force that is substantially perpendicular to the distal finger pad throughout the full 180 degrees of finger bend motion represented. The finger linkage design, in combination with a remote position measurement and force display assembly, provides a very lightweight and low inertia system with a large workspace. The concept of a replicated finger is introduced which, in combination with a decoupled actuator and feed forward control, provides improved performance in transparent free motion, and rapid, stable touch sensation of initial contact with rigid surfaces. A distributed computation architecture with a PC based haptic interface controller and associated control algorithms are also discussed. |
doi_str_mv | 10.1115/1.1470493 |
format | Article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_27125329</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>27125329</sourcerecordid><originalsourceid>FETCH-LOGICAL-a374t-ed61c678fabbb6460828a02bf8408baa2baa4e6fb7fe9b6efdf9fc1c5bde06333</originalsourceid><addsrcrecordid>eNpF0E1LxDAQBuAiCq6rB89eclHw0DVJk7Q9yup-wIIgq9cwSSdLpdvUpHvw3xvZBQ_DDMMzc3iz7JbRGWNMPrEZEyUVdXGWTZjkVV5Tys7TTCXNqSj5ZXYV41daskrISfb5grHd9QT6hsx9PwbfEe8IkIUPFvN3dB3ase13ZAXD2Fqy7kcMDiwS5wPZYod-wABj63voyDJAHJK-zi4cdBFvTn2afSxet_NVvnlbrufPmxyKUow5NopZVVYOjDFKKFrxCig3rhK0MgA8lUDlTOmwNgpd42pnmZWmQaqKophmD8e_Q_DfB4yj3rfRYtdBj_4QNS8ZlwWvE3w8Qht8jAGdHkK7h_CjGdV_yWmmT8kle396CtFC5wL0to3_B0ViUqrk7o4O4h71lz-EFEHUQiolquIXW293Kg</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>27125329</pqid></control><display><type>article</type><title>Design and Control of a Force-Reflecting Haptic Interface for Teleoperational Grasping</title><source>ASME Transactions Journals (Current)</source><creator>Springer, Scott L ; Ferrier, Nicola J</creator><creatorcontrib>Springer, Scott L ; Ferrier, Nicola J</creatorcontrib><description>In this paper the design of a multi-finger force-reflecting haptic interface device for teleoperational grasping is introduced. The haptic interface or “master” controller device is worn on the human operator’s hand and measured human finger positions are used to control the finger positions of a remote grasping manipulator or “slave” device. The slave may be a physical robotic grasping manipulator, or a computer generated representation of a human hand such as used in virtual reality applications. The forces measured by the robotic slave, or calculated for the virtual slave, are presented to the operator’s fingertips through the master providing a means for deeper human sensation of presence and better control of grasping tasks in the slave environments. Design parameters and performance measures for haptic interfaces for teleoperation are discussed. One key performance issue involving the high-speed display of forces during initial contact, especially when interacting with rigid surfaces, is addressed by the present design, reducing slave controller computation requirements and overcoming actuator response time constraints. The design presented utilizes a planar four-bar linkage for each finger, to represent each finger bend motion as a single degree of freedom, and to provide a finger bend resistance force that is substantially perpendicular to the distal finger pad throughout the full 180 degrees of finger bend motion represented. The finger linkage design, in combination with a remote position measurement and force display assembly, provides a very lightweight and low inertia system with a large workspace. The concept of a replicated finger is introduced which, in combination with a decoupled actuator and feed forward control, provides improved performance in transparent free motion, and rapid, stable touch sensation of initial contact with rigid surfaces. A distributed computation architecture with a PC based haptic interface controller and associated control algorithms are also discussed.</description><identifier>ISSN: 1050-0472</identifier><identifier>EISSN: 1528-9001</identifier><identifier>DOI: 10.1115/1.1470493</identifier><language>eng</language><publisher>New York, NY: ASME</publisher><subject>Applied sciences ; Computer science; control theory; systems ; Control system synthesis ; Control theory. Systems ; Drives ; Exact sciences and technology ; Linkage mechanisms, cams ; Mechanical engineering. Machine design ; Robotics</subject><ispartof>Journal of mechanical design (1990), 2002-06, Vol.124 (2), p.277-283</ispartof><rights>2002 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-a374t-ed61c678fabbb6460828a02bf8408baa2baa4e6fb7fe9b6efdf9fc1c5bde06333</citedby><cites>FETCH-LOGICAL-a374t-ed61c678fabbb6460828a02bf8408baa2baa4e6fb7fe9b6efdf9fc1c5bde06333</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27923,27924,38519</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=13704556$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Springer, Scott L</creatorcontrib><creatorcontrib>Ferrier, Nicola J</creatorcontrib><title>Design and Control of a Force-Reflecting Haptic Interface for Teleoperational Grasping</title><title>Journal of mechanical design (1990)</title><addtitle>J. Mech. Des</addtitle><description>In this paper the design of a multi-finger force-reflecting haptic interface device for teleoperational grasping is introduced. The haptic interface or “master” controller device is worn on the human operator’s hand and measured human finger positions are used to control the finger positions of a remote grasping manipulator or “slave” device. The slave may be a physical robotic grasping manipulator, or a computer generated representation of a human hand such as used in virtual reality applications. The forces measured by the robotic slave, or calculated for the virtual slave, are presented to the operator’s fingertips through the master providing a means for deeper human sensation of presence and better control of grasping tasks in the slave environments. Design parameters and performance measures for haptic interfaces for teleoperation are discussed. One key performance issue involving the high-speed display of forces during initial contact, especially when interacting with rigid surfaces, is addressed by the present design, reducing slave controller computation requirements and overcoming actuator response time constraints. The design presented utilizes a planar four-bar linkage for each finger, to represent each finger bend motion as a single degree of freedom, and to provide a finger bend resistance force that is substantially perpendicular to the distal finger pad throughout the full 180 degrees of finger bend motion represented. The finger linkage design, in combination with a remote position measurement and force display assembly, provides a very lightweight and low inertia system with a large workspace. The concept of a replicated finger is introduced which, in combination with a decoupled actuator and feed forward control, provides improved performance in transparent free motion, and rapid, stable touch sensation of initial contact with rigid surfaces. A distributed computation architecture with a PC based haptic interface controller and associated control algorithms are also discussed.</description><subject>Applied sciences</subject><subject>Computer science; control theory; systems</subject><subject>Control system synthesis</subject><subject>Control theory. Systems</subject><subject>Drives</subject><subject>Exact sciences and technology</subject><subject>Linkage mechanisms, cams</subject><subject>Mechanical engineering. Machine design</subject><subject>Robotics</subject><issn>1050-0472</issn><issn>1528-9001</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2002</creationdate><recordtype>article</recordtype><recordid>eNpF0E1LxDAQBuAiCq6rB89eclHw0DVJk7Q9yup-wIIgq9cwSSdLpdvUpHvw3xvZBQ_DDMMzc3iz7JbRGWNMPrEZEyUVdXGWTZjkVV5Tys7TTCXNqSj5ZXYV41daskrISfb5grHd9QT6hsx9PwbfEe8IkIUPFvN3dB3ase13ZAXD2Fqy7kcMDiwS5wPZYod-wABj63voyDJAHJK-zi4cdBFvTn2afSxet_NVvnlbrufPmxyKUow5NopZVVYOjDFKKFrxCig3rhK0MgA8lUDlTOmwNgpd42pnmZWmQaqKophmD8e_Q_DfB4yj3rfRYtdBj_4QNS8ZlwWvE3w8Qht8jAGdHkK7h_CjGdV_yWmmT8kle396CtFC5wL0to3_B0ViUqrk7o4O4h71lz-EFEHUQiolquIXW293Kg</recordid><startdate>20020601</startdate><enddate>20020601</enddate><creator>Springer, Scott L</creator><creator>Ferrier, Nicola J</creator><general>ASME</general><general>American Society of Mechanical Engineers</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7TB</scope><scope>8FD</scope><scope>FR3</scope></search><sort><creationdate>20020601</creationdate><title>Design and Control of a Force-Reflecting Haptic Interface for Teleoperational Grasping</title><author>Springer, Scott L ; Ferrier, Nicola J</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-a374t-ed61c678fabbb6460828a02bf8408baa2baa4e6fb7fe9b6efdf9fc1c5bde06333</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2002</creationdate><topic>Applied sciences</topic><topic>Computer science; control theory; systems</topic><topic>Control system synthesis</topic><topic>Control theory. Systems</topic><topic>Drives</topic><topic>Exact sciences and technology</topic><topic>Linkage mechanisms, cams</topic><topic>Mechanical engineering. Machine design</topic><topic>Robotics</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Springer, Scott L</creatorcontrib><creatorcontrib>Ferrier, Nicola J</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><jtitle>Journal of mechanical design (1990)</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Springer, Scott L</au><au>Ferrier, Nicola J</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Design and Control of a Force-Reflecting Haptic Interface for Teleoperational Grasping</atitle><jtitle>Journal of mechanical design (1990)</jtitle><stitle>J. Mech. Des</stitle><date>2002-06-01</date><risdate>2002</risdate><volume>124</volume><issue>2</issue><spage>277</spage><epage>283</epage><pages>277-283</pages><issn>1050-0472</issn><eissn>1528-9001</eissn><abstract>In this paper the design of a multi-finger force-reflecting haptic interface device for teleoperational grasping is introduced. The haptic interface or “master” controller device is worn on the human operator’s hand and measured human finger positions are used to control the finger positions of a remote grasping manipulator or “slave” device. The slave may be a physical robotic grasping manipulator, or a computer generated representation of a human hand such as used in virtual reality applications. The forces measured by the robotic slave, or calculated for the virtual slave, are presented to the operator’s fingertips through the master providing a means for deeper human sensation of presence and better control of grasping tasks in the slave environments. Design parameters and performance measures for haptic interfaces for teleoperation are discussed. One key performance issue involving the high-speed display of forces during initial contact, especially when interacting with rigid surfaces, is addressed by the present design, reducing slave controller computation requirements and overcoming actuator response time constraints. The design presented utilizes a planar four-bar linkage for each finger, to represent each finger bend motion as a single degree of freedom, and to provide a finger bend resistance force that is substantially perpendicular to the distal finger pad throughout the full 180 degrees of finger bend motion represented. The finger linkage design, in combination with a remote position measurement and force display assembly, provides a very lightweight and low inertia system with a large workspace. The concept of a replicated finger is introduced which, in combination with a decoupled actuator and feed forward control, provides improved performance in transparent free motion, and rapid, stable touch sensation of initial contact with rigid surfaces. A distributed computation architecture with a PC based haptic interface controller and associated control algorithms are also discussed.</abstract><cop>New York, NY</cop><pub>ASME</pub><doi>10.1115/1.1470493</doi><tpages>7</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 1050-0472 |
ispartof | Journal of mechanical design (1990), 2002-06, Vol.124 (2), p.277-283 |
issn | 1050-0472 1528-9001 |
language | eng |
recordid | cdi_proquest_miscellaneous_27125329 |
source | ASME Transactions Journals (Current) |
subjects | Applied sciences Computer science control theory systems Control system synthesis Control theory. Systems Drives Exact sciences and technology Linkage mechanisms, cams Mechanical engineering. Machine design Robotics |
title | Design and Control of a Force-Reflecting Haptic Interface for Teleoperational Grasping |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-12T11%3A06%3A07IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Design%20and%20Control%20of%20a%20Force-Reflecting%20Haptic%20Interface%20for%20Teleoperational%20Grasping&rft.jtitle=Journal%20of%20mechanical%20design%20(1990)&rft.au=Springer,%20Scott%20L&rft.date=2002-06-01&rft.volume=124&rft.issue=2&rft.spage=277&rft.epage=283&rft.pages=277-283&rft.issn=1050-0472&rft.eissn=1528-9001&rft_id=info:doi/10.1115/1.1470493&rft_dat=%3Cproquest_cross%3E27125329%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=27125329&rft_id=info:pmid/&rfr_iscdi=true |