A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate
The aim of this study is to examine the effects of woven fiber, specimen width-to-hole diameter ratio (W/D), and the ratio of edge distance to hole diameter ( E/ D) on the bearing strength of woven laminated composites. Glass/epoxy composites were manufactured under pressure by moulds at 120°C. The...
Gespeichert in:
| Veröffentlicht in: | Composites science and technology 2001-08, Vol.61 (10), p.1491-1497 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 1497 |
|---|---|
| container_issue | 10 |
| container_start_page | 1491 |
| container_title | Composites science and technology |
| container_volume | 61 |
| creator | Okutan, Buket Aslan, Züleyha Karakuzu, Ramazan |
| description | The aim of this study is to examine the effects of woven fiber, specimen width-to-hole diameter ratio (W/D), and the ratio of edge distance to hole diameter (
E/
D) on the bearing strength of woven laminated composites. Glass/epoxy composites were manufactured under pressure by moulds at 120°C. The mechanical properties and strengths of the composites were obtained experimentally. The glass/epoxy woven composites were loaded through pins. Single-hole pin-loaded specimens were tested for their tensile response and
W/
D and
E/
D ratios evaluated. Failure propagation and failure type were observed on the specimens. The influence of the joint geometry on the strength of the pin-loaded composites was assessed. The experimental results show that the ultimate load capacity of woven-glass-fiber, reinforced epoxy laminates with pin connections was increased by increasing
W and
E. However increasing the
E/
D ratio beyond 2 and increasing the
W/
D ratio beyond 3 have an insignificant effect on the ultimate load capability of the connection. |
| doi_str_mv | 10.1016/S0266-3538(01)00043-4 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_26972767</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0266353801000434</els_id><sourcerecordid>26972767</sourcerecordid><originalsourceid>FETCH-LOGICAL-c433t-b9314a4b1b733da30fa0d380e010b8ac0a78f9cf95e15f5911f82a3a1d61b993</originalsourceid><addsrcrecordid>eNqFkc-KFDEQh4MoOK4-gpCDiB6iqU7_y0mWRVdhwYN7D9XpymykJ2mTntmdN_CxTc8sevSUhPp-VdQXxl6D_AAS2o8_ZNW2QjWqfyfhvZSyVqJ-wjbQd1qAbORTtvmLPGcvcv5ZoK7R1Yb9vuR52Y9HHh1f7oiTc2SXvD4PmHzcZ76luKMlectnTFiulEo9nHCHftonKj0She1yt-ZmH8QUcaSR38cDBbGdMGfh_ECJJ_LBxWRLkeb4cOQT7nzAhV6yZw6nTK8ezwt2--Xz7dVXcfP9-tvV5Y2wtVKLGLSCGusBhk6pEZV0KEfVS5Ighx6txK532jrdEDSu0QCur1AhjC0MWqsL9vbcdk7x157yYnY-W5omDFSWNVWru6pruwI2Z9CmmHMiZ-bkd5iOBqRZtZuTdrM6NRLMSbupS-7N4wDMFieXMFif_4VBtapesU9njMquB0_JZOspFC8-lQ8wY_T_GfQHHTSZIg</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>26972767</pqid></control><display><type>article</type><title>A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate</title><source>Elsevier ScienceDirect Journals</source><creator>Okutan, Buket ; Aslan, Züleyha ; Karakuzu, Ramazan</creator><creatorcontrib>Okutan, Buket ; Aslan, Züleyha ; Karakuzu, Ramazan</creatorcontrib><description>The aim of this study is to examine the effects of woven fiber, specimen width-to-hole diameter ratio (W/D), and the ratio of edge distance to hole diameter (
E/
D) on the bearing strength of woven laminated composites. Glass/epoxy composites were manufactured under pressure by moulds at 120°C. The mechanical properties and strengths of the composites were obtained experimentally. The glass/epoxy woven composites were loaded through pins. Single-hole pin-loaded specimens were tested for their tensile response and
W/
D and
E/
D ratios evaluated. Failure propagation and failure type were observed on the specimens. The influence of the joint geometry on the strength of the pin-loaded composites was assessed. The experimental results show that the ultimate load capacity of woven-glass-fiber, reinforced epoxy laminates with pin connections was increased by increasing
W and
E. However increasing the
E/
D ratio beyond 2 and increasing the
W/
D ratio beyond 3 have an insignificant effect on the ultimate load capability of the connection.</description><identifier>ISSN: 0266-3538</identifier><identifier>EISSN: 1879-1050</identifier><identifier>DOI: 10.1016/S0266-3538(01)00043-4</identifier><identifier>CODEN: CSTCEH</identifier><language>eng</language><publisher>Oxford: Elsevier Ltd</publisher><subject>A. Glass fibers ; A. Layered structures ; Applied sciences ; B. Strength ; Exact sciences and technology ; Forms of application and semi-finished materials ; Laminates ; Pin ; Polymer industry, paints, wood ; Technology of polymers ; Woven-fabric</subject><ispartof>Composites science and technology, 2001-08, Vol.61 (10), p.1491-1497</ispartof><rights>2001</rights><rights>2001 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c433t-b9314a4b1b733da30fa0d380e010b8ac0a78f9cf95e15f5911f82a3a1d61b993</citedby><cites>FETCH-LOGICAL-c433t-b9314a4b1b733da30fa0d380e010b8ac0a78f9cf95e15f5911f82a3a1d61b993</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S0266353801000434$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3537,27901,27902,65306</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=1136344$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Okutan, Buket</creatorcontrib><creatorcontrib>Aslan, Züleyha</creatorcontrib><creatorcontrib>Karakuzu, Ramazan</creatorcontrib><title>A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate</title><title>Composites science and technology</title><description>The aim of this study is to examine the effects of woven fiber, specimen width-to-hole diameter ratio (W/D), and the ratio of edge distance to hole diameter (
E/
D) on the bearing strength of woven laminated composites. Glass/epoxy composites were manufactured under pressure by moulds at 120°C. The mechanical properties and strengths of the composites were obtained experimentally. The glass/epoxy woven composites were loaded through pins. Single-hole pin-loaded specimens were tested for their tensile response and
W/
D and
E/
D ratios evaluated. Failure propagation and failure type were observed on the specimens. The influence of the joint geometry on the strength of the pin-loaded composites was assessed. The experimental results show that the ultimate load capacity of woven-glass-fiber, reinforced epoxy laminates with pin connections was increased by increasing
W and
E. However increasing the
E/
D ratio beyond 2 and increasing the
W/
D ratio beyond 3 have an insignificant effect on the ultimate load capability of the connection.</description><subject>A. Glass fibers</subject><subject>A. Layered structures</subject><subject>Applied sciences</subject><subject>B. Strength</subject><subject>Exact sciences and technology</subject><subject>Forms of application and semi-finished materials</subject><subject>Laminates</subject><subject>Pin</subject><subject>Polymer industry, paints, wood</subject><subject>Technology of polymers</subject><subject>Woven-fabric</subject><issn>0266-3538</issn><issn>1879-1050</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2001</creationdate><recordtype>article</recordtype><recordid>eNqFkc-KFDEQh4MoOK4-gpCDiB6iqU7_y0mWRVdhwYN7D9XpymykJ2mTntmdN_CxTc8sevSUhPp-VdQXxl6D_AAS2o8_ZNW2QjWqfyfhvZSyVqJ-wjbQd1qAbORTtvmLPGcvcv5ZoK7R1Yb9vuR52Y9HHh1f7oiTc2SXvD4PmHzcZ76luKMlectnTFiulEo9nHCHftonKj0She1yt-ZmH8QUcaSR38cDBbGdMGfh_ECJJ_LBxWRLkeb4cOQT7nzAhV6yZw6nTK8ezwt2--Xz7dVXcfP9-tvV5Y2wtVKLGLSCGusBhk6pEZV0KEfVS5Ighx6txK532jrdEDSu0QCur1AhjC0MWqsL9vbcdk7x157yYnY-W5omDFSWNVWru6pruwI2Z9CmmHMiZ-bkd5iOBqRZtZuTdrM6NRLMSbupS-7N4wDMFieXMFif_4VBtapesU9njMquB0_JZOspFC8-lQ8wY_T_GfQHHTSZIg</recordid><startdate>200108</startdate><enddate>200108</enddate><creator>Okutan, Buket</creator><creator>Aslan, Züleyha</creator><creator>Karakuzu, Ramazan</creator><general>Elsevier Ltd</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>200108</creationdate><title>A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate</title><author>Okutan, Buket ; Aslan, Züleyha ; Karakuzu, Ramazan</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c433t-b9314a4b1b733da30fa0d380e010b8ac0a78f9cf95e15f5911f82a3a1d61b993</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2001</creationdate><topic>A. Glass fibers</topic><topic>A. Layered structures</topic><topic>Applied sciences</topic><topic>B. Strength</topic><topic>Exact sciences and technology</topic><topic>Forms of application and semi-finished materials</topic><topic>Laminates</topic><topic>Pin</topic><topic>Polymer industry, paints, wood</topic><topic>Technology of polymers</topic><topic>Woven-fabric</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Okutan, Buket</creatorcontrib><creatorcontrib>Aslan, Züleyha</creatorcontrib><creatorcontrib>Karakuzu, Ramazan</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Composites science and technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Okutan, Buket</au><au>Aslan, Züleyha</au><au>Karakuzu, Ramazan</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate</atitle><jtitle>Composites science and technology</jtitle><date>2001-08</date><risdate>2001</risdate><volume>61</volume><issue>10</issue><spage>1491</spage><epage>1497</epage><pages>1491-1497</pages><issn>0266-3538</issn><eissn>1879-1050</eissn><coden>CSTCEH</coden><abstract>The aim of this study is to examine the effects of woven fiber, specimen width-to-hole diameter ratio (W/D), and the ratio of edge distance to hole diameter (
E/
D) on the bearing strength of woven laminated composites. Glass/epoxy composites were manufactured under pressure by moulds at 120°C. The mechanical properties and strengths of the composites were obtained experimentally. The glass/epoxy woven composites were loaded through pins. Single-hole pin-loaded specimens were tested for their tensile response and
W/
D and
E/
D ratios evaluated. Failure propagation and failure type were observed on the specimens. The influence of the joint geometry on the strength of the pin-loaded composites was assessed. The experimental results show that the ultimate load capacity of woven-glass-fiber, reinforced epoxy laminates with pin connections was increased by increasing
W and
E. However increasing the
E/
D ratio beyond 2 and increasing the
W/
D ratio beyond 3 have an insignificant effect on the ultimate load capability of the connection.</abstract><cop>Oxford</cop><pub>Elsevier Ltd</pub><doi>10.1016/S0266-3538(01)00043-4</doi><tpages>7</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0266-3538 |
| ispartof | Composites science and technology, 2001-08, Vol.61 (10), p.1491-1497 |
| issn | 0266-3538 1879-1050 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_26972767 |
| source | Elsevier ScienceDirect Journals |
| subjects | A. Glass fibers A. Layered structures Applied sciences B. Strength Exact sciences and technology Forms of application and semi-finished materials Laminates Pin Polymer industry, paints, wood Technology of polymers Woven-fabric |
| title | A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-04T03%3A08%3A00IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=A%20study%20of%20the%20effects%20of%20various%20geometric%20parameters%20on%20the%20failure%20strength%20of%20pin-loaded%20woven-glass-fiber%20reinforced%20epoxy%20laminate&rft.jtitle=Composites%20science%20and%20technology&rft.au=Okutan,%20Buket&rft.date=2001-08&rft.volume=61&rft.issue=10&rft.spage=1491&rft.epage=1497&rft.pages=1491-1497&rft.issn=0266-3538&rft.eissn=1879-1050&rft.coden=CSTCEH&rft_id=info:doi/10.1016/S0266-3538(01)00043-4&rft_dat=%3Cproquest_cross%3E26972767%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=26972767&rft_id=info:pmid/&rft_els_id=S0266353801000434&rfr_iscdi=true |