Resistance welding of thermosetting composite/thermoplastic composite joints

Resistance welding of thermosetting composite/thermoplastic composite joints

An investigation of the resistance welding between carbon fibre (CF)-reinforced polyetherimide (PEI) and CF-reinforced epoxy laminates is presented. A three-dimensional transient finite element model (FEM) featuring heat transfer, consolidation and thermal degradation was used for simulating the pro...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Composites. Part A, Applied science and manufacturing Applied science and manufacturing, 2001-01, Vol.32 (11), p.1603-1612
Hauptverfasser: Ageorges, C., Ye, L.
Format: Artikel
Sprache:eng
Schlagworte:
A. Polymer–matrix composites (PMCs)
Applied sciences
B. Microstructure
Composites
Exact sciences and technology
Forms of application and semi-finished materials
Polymer industry, paints, wood
Technology of polymers
Welding/joining
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 1612
container_issue 11
container_start_page 1603
container_title Composites. Part A, Applied science and manufacturing
container_volume 32
creator Ageorges, C.
Ye, L.
description An investigation of the resistance welding between carbon fibre (CF)-reinforced polyetherimide (PEI) and CF-reinforced epoxy laminates is presented. A three-dimensional transient finite element model (FEM) featuring heat transfer, consolidation and thermal degradation was used for simulating the process. A hybrid interlayer made of a glass fibre (GF) fabric essentially impregnated with PEI on one side and with epoxy resin on the other side was produced to provide mechanical interlocking between the thermoplastic (TP) and the thermosetting (TS) systems. The ‘optimal’ resistance welding time based on the maximum lap shear strength (LSS) was determined for three power levels and correlated to the time required to achieve bonding predicted by the FEM. Consolidation quality and failure mechanisms were discussed in relation with processing parameters. Experimental and simulated processing windows were constructed and correlated to each other. However, thermal degradation as predicted by the model did not correlate to a reduction in performance of the joint.
doi_str_mv 10.1016/S1359-835X(00)00183-4
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_26944622</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S1359835X00001834</els_id><sourcerecordid>26944622</sourcerecordid><originalsourceid>FETCH-LOGICAL-c405t-af72c763e2bb4b0a80691a47f32d6839685eef048e794b195794ac3763f48e2c3</originalsourceid><addsrcrecordid>eNqFkE1LxDAQhosouK7-BKEXRQ91J03apieRxS9YEPwAbyFNp5qlu1kzWcV_b_ZDPHqa8PK8GeZJkmMGFwxYOXpivKgzyYvXM4BzACZ5JnaSAZOVzAopYDe-f5H95IBoCgCc12yQTB6RLAU9N5h-Yd_a-VvqujS8o585whBWgXGzhSMbcLTJF72mYM1fnk6dnQc6TPY63RMebecwebm5fh7fZZOH2_vx1SQzAoqQ6a7KTVVyzJtGNKAllDXToup43paS16UsEDsQEqtaNKwu4tCGx0YXs9zwYXK6-Xfh3ccSKaiZJYN9r-folqTyshaizPMIFhvQeEfksVMLb2fafysGauVOrd2plRgFoNbulIi9k-0CTUb3nY9-LP2VBdRVmcvIXW44jNd-WvSKjMXosrUeTVCts_9s-gEWT4S8</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>26944622</pqid></control><display><type>article</type><title>Resistance welding of thermosetting composite/thermoplastic composite joints</title><source>Elsevier ScienceDirect Journals</source><creator>Ageorges, C. ; Ye, L.</creator><creatorcontrib>Ageorges, C. ; Ye, L.</creatorcontrib><description>An investigation of the resistance welding between carbon fibre (CF)-reinforced polyetherimide (PEI) and CF-reinforced epoxy laminates is presented. A three-dimensional transient finite element model (FEM) featuring heat transfer, consolidation and thermal degradation was used for simulating the process. A hybrid interlayer made of a glass fibre (GF) fabric essentially impregnated with PEI on one side and with epoxy resin on the other side was produced to provide mechanical interlocking between the thermoplastic (TP) and the thermosetting (TS) systems. The ‘optimal’ resistance welding time based on the maximum lap shear strength (LSS) was determined for three power levels and correlated to the time required to achieve bonding predicted by the FEM. Consolidation quality and failure mechanisms were discussed in relation with processing parameters. Experimental and simulated processing windows were constructed and correlated to each other. However, thermal degradation as predicted by the model did not correlate to a reduction in performance of the joint.</description><identifier>ISSN: 1359-835X</identifier><identifier>EISSN: 1878-5840</identifier><identifier>DOI: 10.1016/S1359-835X(00)00183-4</identifier><language>eng</language><publisher>Oxford: Elsevier Ltd</publisher><subject>A. Polymer–matrix composites (PMCs) ; Applied sciences ; B. Microstructure ; Composites ; Exact sciences and technology ; Forms of application and semi-finished materials ; Polymer industry, paints, wood ; Technology of polymers ; Welding/joining</subject><ispartof>Composites. Part A, Applied science and manufacturing, 2001-01, Vol.32 (11), p.1603-1612</ispartof><rights>2001 Elsevier Science Ltd</rights><rights>2002 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c405t-af72c763e2bb4b0a80691a47f32d6839685eef048e794b195794ac3763f48e2c3</citedby><cites>FETCH-LOGICAL-c405t-af72c763e2bb4b0a80691a47f32d6839685eef048e794b195794ac3763f48e2c3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/S1359-835X(00)00183-4$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3536,27903,27904,45974</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&amp;idt=14097628$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Ageorges, C.</creatorcontrib><creatorcontrib>Ye, L.</creatorcontrib><title>Resistance welding of thermosetting composite/thermoplastic composite joints</title><title>Composites. Part A, Applied science and manufacturing</title><description>An investigation of the resistance welding between carbon fibre (CF)-reinforced polyetherimide (PEI) and CF-reinforced epoxy laminates is presented. A three-dimensional transient finite element model (FEM) featuring heat transfer, consolidation and thermal degradation was used for simulating the process. A hybrid interlayer made of a glass fibre (GF) fabric essentially impregnated with PEI on one side and with epoxy resin on the other side was produced to provide mechanical interlocking between the thermoplastic (TP) and the thermosetting (TS) systems. The ‘optimal’ resistance welding time based on the maximum lap shear strength (LSS) was determined for three power levels and correlated to the time required to achieve bonding predicted by the FEM. Consolidation quality and failure mechanisms were discussed in relation with processing parameters. Experimental and simulated processing windows were constructed and correlated to each other. However, thermal degradation as predicted by the model did not correlate to a reduction in performance of the joint.</description><subject>A. Polymer–matrix composites (PMCs)</subject><subject>Applied sciences</subject><subject>B. Microstructure</subject><subject>Composites</subject><subject>Exact sciences and technology</subject><subject>Forms of application and semi-finished materials</subject><subject>Polymer industry, paints, wood</subject><subject>Technology of polymers</subject><subject>Welding/joining</subject><issn>1359-835X</issn><issn>1878-5840</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2001</creationdate><recordtype>article</recordtype><recordid>eNqFkE1LxDAQhosouK7-BKEXRQ91J03apieRxS9YEPwAbyFNp5qlu1kzWcV_b_ZDPHqa8PK8GeZJkmMGFwxYOXpivKgzyYvXM4BzACZ5JnaSAZOVzAopYDe-f5H95IBoCgCc12yQTB6RLAU9N5h-Yd_a-VvqujS8o585whBWgXGzhSMbcLTJF72mYM1fnk6dnQc6TPY63RMebecwebm5fh7fZZOH2_vx1SQzAoqQ6a7KTVVyzJtGNKAllDXToup43paS16UsEDsQEqtaNKwu4tCGx0YXs9zwYXK6-Xfh3ccSKaiZJYN9r-folqTyshaizPMIFhvQeEfksVMLb2fafysGauVOrd2plRgFoNbulIi9k-0CTUb3nY9-LP2VBdRVmcvIXW44jNd-WvSKjMXosrUeTVCts_9s-gEWT4S8</recordid><startdate>20010101</startdate><enddate>20010101</enddate><creator>Ageorges, C.</creator><creator>Ye, L.</creator><general>Elsevier Ltd</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8FD</scope><scope>F28</scope><scope>FR3</scope><scope>JG9</scope></search><sort><creationdate>20010101</creationdate><title>Resistance welding of thermosetting composite/thermoplastic composite joints</title><author>Ageorges, C. ; Ye, L.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c405t-af72c763e2bb4b0a80691a47f32d6839685eef048e794b195794ac3763f48e2c3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2001</creationdate><topic>A. Polymer–matrix composites (PMCs)</topic><topic>Applied sciences</topic><topic>B. Microstructure</topic><topic>Composites</topic><topic>Exact sciences and technology</topic><topic>Forms of application and semi-finished materials</topic><topic>Polymer industry, paints, wood</topic><topic>Technology of polymers</topic><topic>Welding/joining</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Ageorges, C.</creatorcontrib><creatorcontrib>Ye, L.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>ANTE: Abstracts in New Technology &amp; Engineering</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><jtitle>Composites. Part A, Applied science and manufacturing</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Ageorges, C.</au><au>Ye, L.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Resistance welding of thermosetting composite/thermoplastic composite joints</atitle><jtitle>Composites. Part A, Applied science and manufacturing</jtitle><date>2001-01-01</date><risdate>2001</risdate><volume>32</volume><issue>11</issue><spage>1603</spage><epage>1612</epage><pages>1603-1612</pages><issn>1359-835X</issn><eissn>1878-5840</eissn><abstract>An investigation of the resistance welding between carbon fibre (CF)-reinforced polyetherimide (PEI) and CF-reinforced epoxy laminates is presented. A three-dimensional transient finite element model (FEM) featuring heat transfer, consolidation and thermal degradation was used for simulating the process. A hybrid interlayer made of a glass fibre (GF) fabric essentially impregnated with PEI on one side and with epoxy resin on the other side was produced to provide mechanical interlocking between the thermoplastic (TP) and the thermosetting (TS) systems. The ‘optimal’ resistance welding time based on the maximum lap shear strength (LSS) was determined for three power levels and correlated to the time required to achieve bonding predicted by the FEM. Consolidation quality and failure mechanisms were discussed in relation with processing parameters. Experimental and simulated processing windows were constructed and correlated to each other. However, thermal degradation as predicted by the model did not correlate to a reduction in performance of the joint.</abstract><cop>Oxford</cop><pub>Elsevier Ltd</pub><doi>10.1016/S1359-835X(00)00183-4</doi><tpages>10</tpages></addata></record>
fulltext fulltext
identifier ISSN: 1359-835X
ispartof Composites. Part A, Applied science and manufacturing, 2001-01, Vol.32 (11), p.1603-1612
issn 1359-835X
1878-5840
language eng
recordid cdi_proquest_miscellaneous_26944622
source Elsevier ScienceDirect Journals
subjects A. Polymer–matrix composites (PMCs)
Applied sciences
B. Microstructure
Composites
Exact sciences and technology
Forms of application and semi-finished materials
Polymer industry, paints, wood
Technology of polymers
Welding/joining
title Resistance welding of thermosetting composite/thermoplastic composite joints
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-21T19%3A59%3A39IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Resistance%20welding%20of%20thermosetting%20composite/thermoplastic%20composite%20joints&rft.jtitle=Composites.%20Part%20A,%20Applied%20science%20and%20manufacturing&rft.au=Ageorges,%20C.&rft.date=2001-01-01&rft.volume=32&rft.issue=11&rft.spage=1603&rft.epage=1612&rft.pages=1603-1612&rft.issn=1359-835X&rft.eissn=1878-5840&rft_id=info:doi/10.1016/S1359-835X(00)00183-4&rft_dat=%3Cproquest_cross%3E26944622%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=26944622&rft_id=info:pmid/&rft_els_id=S1359835X00001834&rfr_iscdi=true