Back-Contact Ionic Compound Engineering Boosting the Efficiency and Stability of Blade-Coated Perovskite Solar Cells
Surface defect passivation, which plays a vital role in achieving high-efficiency perovskite solar cells (PSCs) in a spin-coating process, is rarely compatible with a printing process. Currently, printing PSCs with high efficiency remains a challenge, as only a few laboratories realized an efficienc...
Gespeichert in:
| Veröffentlicht in: | ACS applied materials & interfaces 2022-07, Vol.14 (29), p.34040-34048 |
|---|---|
| Hauptverfasser: | , , , , , , , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 34048 |
|---|---|
| container_issue | 29 |
| container_start_page | 34040 |
| container_title | ACS applied materials & interfaces |
| container_volume | 14 |
| creator | Yu, Zhaohui Tao, Junlei Shen, Jinliang Jia, Zhongzhong Zhong, Hua Yin, Song Liu, Xudong Liu, Mingxuan Fu, Guangsheng Yang, Shaopeng Kong, Weiguang |
| description | Surface defect passivation, which plays a vital role in achieving high-efficiency perovskite solar cells (PSCs) in a spin-coating process, is rarely compatible with a printing process. Currently, printing PSCs with high efficiency remains a challenge, as only a few laboratories realized an efficiency of over 20%. In this work, zwitterionic compounds 2-hydroxyethyl trimethyl ammonium chloride (HETACl) and butyltrimethylammonium chloride (BTACl) were introduced, both of which can spontaneously adsorb on the surface perovskite and form an ultrathin passivation layer by a dip coating method. The complex formed by the strong interaction of HETACl with MAI on the surface of the perovskite film leads to the formation of a rough perovskite surface, which affects the enhancement of device performance. BTACl with a chemically inert side chain induces a weak interaction with the perovskite. It is demonstrated that BTACl not only passivates surface defects of the perovskite but also heals the grain boundaries and results in more uniform crystallizations. Finally, PSCs upon BTACl treatment were blade-coated in an ambient environment with a relative humidity of |
| doi_str_mv | 10.1021/acsami.2c07552 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_2689670414</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2689670414</sourcerecordid><originalsourceid>FETCH-LOGICAL-a330t-f6ce6591c4f2322fe1ffe7381a05a258edd4f8f8d1afa23cad8152c02a358bcd3</originalsourceid><addsrcrecordid>eNp1kE1PGzEQhq2qqFDaK8fKx6rSBn9uNkeySlskpCLRnlcTewyGXTvY3kr59xgl5dbTzOF5X808hFxwtuBM8EswGSa_EIYttRbvyBlfKdV0Qov3b7tSp-Rjzo-MtVIw_YGcSt1JJVfyjJQ1mKemj6GAKfQ6Bm9oH6ddnIOlm3DvA2Ly4Z6uY8zldSkPSDfOeeMxmD2Fyt0V2PrRlz2Njq5HsFgboaClt5ji3_zkC9K7OEKiPY5j_kROHIwZPx_nOfnzffO7_9nc_Ppx3V_dNCAlK41rDbZ6xY1yQgrhkDuHS9lxYBqE7tBa5TrXWQ4OhDRgO66rCQH1v62x8px8PfTuUnyeMZdh8tnUCyBgnPMg2m7VLpniqqKLA2pSzDmhG3bJT5D2A2fDq-nhYHo4mq6BL8fueTuhfcP_qa3AtwNQg8NjnFOor_6v7QXEG4oY</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2689670414</pqid></control><display><type>article</type><title>Back-Contact Ionic Compound Engineering Boosting the Efficiency and Stability of Blade-Coated Perovskite Solar Cells</title><source>American Chemical Society Journals</source><creator>Yu, Zhaohui ; Tao, Junlei ; Shen, Jinliang ; Jia, Zhongzhong ; Zhong, Hua ; Yin, Song ; Liu, Xudong ; Liu, Mingxuan ; Fu, Guangsheng ; Yang, Shaopeng ; Kong, Weiguang</creator><creatorcontrib>Yu, Zhaohui ; Tao, Junlei ; Shen, Jinliang ; Jia, Zhongzhong ; Zhong, Hua ; Yin, Song ; Liu, Xudong ; Liu, Mingxuan ; Fu, Guangsheng ; Yang, Shaopeng ; Kong, Weiguang</creatorcontrib><description>Surface defect passivation, which plays a vital role in achieving high-efficiency perovskite solar cells (PSCs) in a spin-coating process, is rarely compatible with a printing process. Currently, printing PSCs with high efficiency remains a challenge, as only a few laboratories realized an efficiency of over 20%. In this work, zwitterionic compounds 2-hydroxyethyl trimethyl ammonium chloride (HETACl) and butyltrimethylammonium chloride (BTACl) were introduced, both of which can spontaneously adsorb on the surface perovskite and form an ultrathin passivation layer by a dip coating method. The complex formed by the strong interaction of HETACl with MAI on the surface of the perovskite film leads to the formation of a rough perovskite surface, which affects the enhancement of device performance. BTACl with a chemically inert side chain induces a weak interaction with the perovskite. It is demonstrated that BTACl not only passivates surface defects of the perovskite but also heals the grain boundaries and results in more uniform crystallizations. Finally, PSCs upon BTACl treatment were blade-coated in an ambient environment with a relative humidity of <50%, which produced a champion efficiency of 20.5% with negligible hysteresis, and the active area of the cell device was 0.095 cm2. After being stored in air for 30 days, unencapsulated PSCs treated with BTACl retained 95% of their initial efficiency, which is far superior to that of the control and those treated with HETACl.</description><identifier>ISSN: 1944-8244</identifier><identifier>EISSN: 1944-8252</identifier><identifier>DOI: 10.1021/acsami.2c07552</identifier><identifier>PMID: 35834393</identifier><language>eng</language><publisher>United States: American Chemical Society</publisher><subject>Surfaces, Interfaces, and Applications</subject><ispartof>ACS applied materials & interfaces, 2022-07, Vol.14 (29), p.34040-34048</ispartof><rights>2022 American Chemical Society</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-a330t-f6ce6591c4f2322fe1ffe7381a05a258edd4f8f8d1afa23cad8152c02a358bcd3</citedby><cites>FETCH-LOGICAL-a330t-f6ce6591c4f2322fe1ffe7381a05a258edd4f8f8d1afa23cad8152c02a358bcd3</cites><orcidid>0000-0002-8073-8106 ; 0000-0002-9478-8526</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://pubs.acs.org/doi/pdf/10.1021/acsami.2c07552$$EPDF$$P50$$Gacs$$H</linktopdf><linktohtml>$$Uhttps://pubs.acs.org/doi/10.1021/acsami.2c07552$$EHTML$$P50$$Gacs$$H</linktohtml><link.rule.ids>314,780,784,2765,27076,27924,27925,56738,56788</link.rule.ids><backlink>$$Uhttps://www.ncbi.nlm.nih.gov/pubmed/35834393$$D View this record in MEDLINE/PubMed$$Hfree_for_read</backlink></links><search><creatorcontrib>Yu, Zhaohui</creatorcontrib><creatorcontrib>Tao, Junlei</creatorcontrib><creatorcontrib>Shen, Jinliang</creatorcontrib><creatorcontrib>Jia, Zhongzhong</creatorcontrib><creatorcontrib>Zhong, Hua</creatorcontrib><creatorcontrib>Yin, Song</creatorcontrib><creatorcontrib>Liu, Xudong</creatorcontrib><creatorcontrib>Liu, Mingxuan</creatorcontrib><creatorcontrib>Fu, Guangsheng</creatorcontrib><creatorcontrib>Yang, Shaopeng</creatorcontrib><creatorcontrib>Kong, Weiguang</creatorcontrib><title>Back-Contact Ionic Compound Engineering Boosting the Efficiency and Stability of Blade-Coated Perovskite Solar Cells</title><title>ACS applied materials & interfaces</title><addtitle>ACS Appl. Mater. Interfaces</addtitle><description>Surface defect passivation, which plays a vital role in achieving high-efficiency perovskite solar cells (PSCs) in a spin-coating process, is rarely compatible with a printing process. Currently, printing PSCs with high efficiency remains a challenge, as only a few laboratories realized an efficiency of over 20%. In this work, zwitterionic compounds 2-hydroxyethyl trimethyl ammonium chloride (HETACl) and butyltrimethylammonium chloride (BTACl) were introduced, both of which can spontaneously adsorb on the surface perovskite and form an ultrathin passivation layer by a dip coating method. The complex formed by the strong interaction of HETACl with MAI on the surface of the perovskite film leads to the formation of a rough perovskite surface, which affects the enhancement of device performance. BTACl with a chemically inert side chain induces a weak interaction with the perovskite. It is demonstrated that BTACl not only passivates surface defects of the perovskite but also heals the grain boundaries and results in more uniform crystallizations. Finally, PSCs upon BTACl treatment were blade-coated in an ambient environment with a relative humidity of <50%, which produced a champion efficiency of 20.5% with negligible hysteresis, and the active area of the cell device was 0.095 cm2. After being stored in air for 30 days, unencapsulated PSCs treated with BTACl retained 95% of their initial efficiency, which is far superior to that of the control and those treated with HETACl.</description><subject>Surfaces, Interfaces, and Applications</subject><issn>1944-8244</issn><issn>1944-8252</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2022</creationdate><recordtype>article</recordtype><recordid>eNp1kE1PGzEQhq2qqFDaK8fKx6rSBn9uNkeySlskpCLRnlcTewyGXTvY3kr59xgl5dbTzOF5X808hFxwtuBM8EswGSa_EIYttRbvyBlfKdV0Qov3b7tSp-Rjzo-MtVIw_YGcSt1JJVfyjJQ1mKemj6GAKfQ6Bm9oH6ddnIOlm3DvA2Ly4Z6uY8zldSkPSDfOeeMxmD2Fyt0V2PrRlz2Njq5HsFgboaClt5ji3_zkC9K7OEKiPY5j_kROHIwZPx_nOfnzffO7_9nc_Ppx3V_dNCAlK41rDbZ6xY1yQgrhkDuHS9lxYBqE7tBa5TrXWQ4OhDRgO66rCQH1v62x8px8PfTuUnyeMZdh8tnUCyBgnPMg2m7VLpniqqKLA2pSzDmhG3bJT5D2A2fDq-nhYHo4mq6BL8fueTuhfcP_qa3AtwNQg8NjnFOor_6v7QXEG4oY</recordid><startdate>20220727</startdate><enddate>20220727</enddate><creator>Yu, Zhaohui</creator><creator>Tao, Junlei</creator><creator>Shen, Jinliang</creator><creator>Jia, Zhongzhong</creator><creator>Zhong, Hua</creator><creator>Yin, Song</creator><creator>Liu, Xudong</creator><creator>Liu, Mingxuan</creator><creator>Fu, Guangsheng</creator><creator>Yang, Shaopeng</creator><creator>Kong, Weiguang</creator><general>American Chemical Society</general><scope>NPM</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7X8</scope><orcidid>https://orcid.org/0000-0002-8073-8106</orcidid><orcidid>https://orcid.org/0000-0002-9478-8526</orcidid></search><sort><creationdate>20220727</creationdate><title>Back-Contact Ionic Compound Engineering Boosting the Efficiency and Stability of Blade-Coated Perovskite Solar Cells</title><author>Yu, Zhaohui ; Tao, Junlei ; Shen, Jinliang ; Jia, Zhongzhong ; Zhong, Hua ; Yin, Song ; Liu, Xudong ; Liu, Mingxuan ; Fu, Guangsheng ; Yang, Shaopeng ; Kong, Weiguang</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-a330t-f6ce6591c4f2322fe1ffe7381a05a258edd4f8f8d1afa23cad8152c02a358bcd3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2022</creationdate><topic>Surfaces, Interfaces, and Applications</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Yu, Zhaohui</creatorcontrib><creatorcontrib>Tao, Junlei</creatorcontrib><creatorcontrib>Shen, Jinliang</creatorcontrib><creatorcontrib>Jia, Zhongzhong</creatorcontrib><creatorcontrib>Zhong, Hua</creatorcontrib><creatorcontrib>Yin, Song</creatorcontrib><creatorcontrib>Liu, Xudong</creatorcontrib><creatorcontrib>Liu, Mingxuan</creatorcontrib><creatorcontrib>Fu, Guangsheng</creatorcontrib><creatorcontrib>Yang, Shaopeng</creatorcontrib><creatorcontrib>Kong, Weiguang</creatorcontrib><collection>PubMed</collection><collection>CrossRef</collection><collection>MEDLINE - Academic</collection><jtitle>ACS applied materials & interfaces</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Yu, Zhaohui</au><au>Tao, Junlei</au><au>Shen, Jinliang</au><au>Jia, Zhongzhong</au><au>Zhong, Hua</au><au>Yin, Song</au><au>Liu, Xudong</au><au>Liu, Mingxuan</au><au>Fu, Guangsheng</au><au>Yang, Shaopeng</au><au>Kong, Weiguang</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Back-Contact Ionic Compound Engineering Boosting the Efficiency and Stability of Blade-Coated Perovskite Solar Cells</atitle><jtitle>ACS applied materials & interfaces</jtitle><addtitle>ACS Appl. Mater. Interfaces</addtitle><date>2022-07-27</date><risdate>2022</risdate><volume>14</volume><issue>29</issue><spage>34040</spage><epage>34048</epage><pages>34040-34048</pages><issn>1944-8244</issn><eissn>1944-8252</eissn><abstract>Surface defect passivation, which plays a vital role in achieving high-efficiency perovskite solar cells (PSCs) in a spin-coating process, is rarely compatible with a printing process. Currently, printing PSCs with high efficiency remains a challenge, as only a few laboratories realized an efficiency of over 20%. In this work, zwitterionic compounds 2-hydroxyethyl trimethyl ammonium chloride (HETACl) and butyltrimethylammonium chloride (BTACl) were introduced, both of which can spontaneously adsorb on the surface perovskite and form an ultrathin passivation layer by a dip coating method. The complex formed by the strong interaction of HETACl with MAI on the surface of the perovskite film leads to the formation of a rough perovskite surface, which affects the enhancement of device performance. BTACl with a chemically inert side chain induces a weak interaction with the perovskite. It is demonstrated that BTACl not only passivates surface defects of the perovskite but also heals the grain boundaries and results in more uniform crystallizations. Finally, PSCs upon BTACl treatment were blade-coated in an ambient environment with a relative humidity of <50%, which produced a champion efficiency of 20.5% with negligible hysteresis, and the active area of the cell device was 0.095 cm2. After being stored in air for 30 days, unencapsulated PSCs treated with BTACl retained 95% of their initial efficiency, which is far superior to that of the control and those treated with HETACl.</abstract><cop>United States</cop><pub>American Chemical Society</pub><pmid>35834393</pmid><doi>10.1021/acsami.2c07552</doi><tpages>9</tpages><orcidid>https://orcid.org/0000-0002-8073-8106</orcidid><orcidid>https://orcid.org/0000-0002-9478-8526</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1944-8244 |
| ispartof | ACS applied materials & interfaces, 2022-07, Vol.14 (29), p.34040-34048 |
| issn | 1944-8244 1944-8252 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_2689670414 |
| source | American Chemical Society Journals |
| subjects | Surfaces, Interfaces, and Applications |
| title | Back-Contact Ionic Compound Engineering Boosting the Efficiency and Stability of Blade-Coated Perovskite Solar Cells |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-07T15%3A38%3A42IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Back-Contact%20Ionic%20Compound%20Engineering%20Boosting%20the%20Efficiency%20and%20Stability%20of%20Blade-Coated%20Perovskite%20Solar%20Cells&rft.jtitle=ACS%20applied%20materials%20&%20interfaces&rft.au=Yu,%20Zhaohui&rft.date=2022-07-27&rft.volume=14&rft.issue=29&rft.spage=34040&rft.epage=34048&rft.pages=34040-34048&rft.issn=1944-8244&rft.eissn=1944-8252&rft_id=info:doi/10.1021/acsami.2c07552&rft_dat=%3Cproquest_cross%3E2689670414%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2689670414&rft_id=info:pmid/35834393&rfr_iscdi=true |