Application of a 138 kV 200 MW braking resistor

Application of a 138 kV 200 MW braking resistor

The background to the application of a 138 kV 600 MW braking resistor, actually three banks at 200 MW each, on the BC Hydro system in order to meet design stability requirements is described. The design and construction of the resistors is then discussed briefly. The original resistor banks were ins...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Power engineering journal 1994-08, Vol.8 (4), p.188-192
Hauptverfasser: Peelo, D F, Hein, D W, Peretti, F
Format: Artikel
Sprache:eng
Schlagworte:
Hydroelectric power plants
Q1
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 192
container_issue 4
container_start_page 188
container_title Power engineering journal
container_volume 8
creator Peelo, D F
Hein, D W
Peretti, F
description The background to the application of a 138 kV 600 MW braking resistor, actually three banks at 200 MW each, on the BC Hydro system in order to meet design stability requirements is described. The design and construction of the resistors is then discussed briefly. The original resistor banks were installed in the 1960s, but one was replaced in 1987 with a hew type of resistor. A load test was run on site to verify the capability of the resistor, and the test and its results are described.
doi_str_mv 10.1049/pe:19940408
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_26494397</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>142159</sourcerecordid><originalsourceid>FETCH-LOGICAL-c293t-4784f3e6ba7dc0e054ff8eb907ca81f15c985d00748c4e161aa01f6029969bd23</originalsourceid><addsrcrecordid>eNqFkLtOwzAUQD2ARClM_IAnFhR6_YwvW1XxkopYeIyW49goNE2MnQ78PaoKM9NZjs5wCLlgcM1A4iKFG4YoQYI5IjNABZUQWp-Q01I-AZiURs3IYplS33k3deNAx0gdZcLQzRvlAPTpnTbZbbrhg-ZQujKN-YwcR9eXcP7LOXm9u31ZPVTr5_vH1XJdeY5iqmRtZBRBN65uPQRQMkYTGoTaO8MiUx6NagFqabwMTDPngEUNHFFj03IxJ5eHbsrj1y6UyW674kPfuyGMu2K5ligF1v-KTBtErvbFq4Po81hKDtGm3G1d_rYM7P6YTcH-HRM_Q8tc7g</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>16899252</pqid></control><display><type>article</type><title>Application of a 138 kV 200 MW braking resistor</title><source>IEEE Electronic Library (IEL)</source><creator>Peelo, D F ; Hein, D W ; Peretti, F</creator><creatorcontrib>Peelo, D F ; Hein, D W ; Peretti, F</creatorcontrib><description>The background to the application of a 138 kV 600 MW braking resistor, actually three banks at 200 MW each, on the BC Hydro system in order to meet design stability requirements is described. The design and construction of the resistors is then discussed briefly. The original resistor banks were installed in the 1960s, but one was replaced in 1987 with a hew type of resistor. A load test was run on site to verify the capability of the resistor, and the test and its results are described.</description><identifier>ISSN: 0950-3366</identifier><identifier>DOI: 10.1049/pe:19940408</identifier><language>eng</language><subject>Hydroelectric power plants ; Q1</subject><ispartof>Power engineering journal, 1994-08, Vol.8 (4), p.188-192</ispartof><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c293t-4784f3e6ba7dc0e054ff8eb907ca81f15c985d00748c4e161aa01f6029969bd23</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27922,27923</link.rule.ids></links><search><creatorcontrib>Peelo, D F</creatorcontrib><creatorcontrib>Hein, D W</creatorcontrib><creatorcontrib>Peretti, F</creatorcontrib><title>Application of a 138 kV 200 MW braking resistor</title><title>Power engineering journal</title><description>The background to the application of a 138 kV 600 MW braking resistor, actually three banks at 200 MW each, on the BC Hydro system in order to meet design stability requirements is described. The design and construction of the resistors is then discussed briefly. The original resistor banks were installed in the 1960s, but one was replaced in 1987 with a hew type of resistor. A load test was run on site to verify the capability of the resistor, and the test and its results are described.</description><subject>Hydroelectric power plants</subject><subject>Q1</subject><issn>0950-3366</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1994</creationdate><recordtype>article</recordtype><recordid>eNqFkLtOwzAUQD2ARClM_IAnFhR6_YwvW1XxkopYeIyW49goNE2MnQ78PaoKM9NZjs5wCLlgcM1A4iKFG4YoQYI5IjNABZUQWp-Q01I-AZiURs3IYplS33k3deNAx0gdZcLQzRvlAPTpnTbZbbrhg-ZQujKN-YwcR9eXcP7LOXm9u31ZPVTr5_vH1XJdeY5iqmRtZBRBN65uPQRQMkYTGoTaO8MiUx6NagFqabwMTDPngEUNHFFj03IxJ5eHbsrj1y6UyW674kPfuyGMu2K5ligF1v-KTBtErvbFq4Po81hKDtGm3G1d_rYM7P6YTcH-HRM_Q8tc7g</recordid><startdate>19940801</startdate><enddate>19940801</enddate><creator>Peelo, D F</creator><creator>Hein, D W</creator><creator>Peretti, F</creator><scope>AAYXX</scope><scope>CITATION</scope><scope>8FD</scope><scope>F28</scope><scope>FR3</scope></search><sort><creationdate>19940801</creationdate><title>Application of a 138 kV 200 MW braking resistor</title><author>Peelo, D F ; Hein, D W ; Peretti, F</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c293t-4784f3e6ba7dc0e054ff8eb907ca81f15c985d00748c4e161aa01f6029969bd23</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1994</creationdate><topic>Hydroelectric power plants</topic><topic>Q1</topic><toplevel>online_resources</toplevel><creatorcontrib>Peelo, D F</creatorcontrib><creatorcontrib>Hein, D W</creatorcontrib><creatorcontrib>Peretti, F</creatorcontrib><collection>CrossRef</collection><collection>Technology Research Database</collection><collection>ANTE: Abstracts in New Technology &amp; Engineering</collection><collection>Engineering Research Database</collection><jtitle>Power engineering journal</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Peelo, D F</au><au>Hein, D W</au><au>Peretti, F</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Application of a 138 kV 200 MW braking resistor</atitle><jtitle>Power engineering journal</jtitle><date>1994-08-01</date><risdate>1994</risdate><volume>8</volume><issue>4</issue><spage>188</spage><epage>192</epage><pages>188-192</pages><issn>0950-3366</issn><abstract>The background to the application of a 138 kV 600 MW braking resistor, actually three banks at 200 MW each, on the BC Hydro system in order to meet design stability requirements is described. The design and construction of the resistors is then discussed briefly. The original resistor banks were installed in the 1960s, but one was replaced in 1987 with a hew type of resistor. A load test was run on site to verify the capability of the resistor, and the test and its results are described.</abstract><doi>10.1049/pe:19940408</doi><tpages>5</tpages></addata></record>
fulltext fulltext
identifier ISSN: 0950-3366
ispartof Power engineering journal, 1994-08, Vol.8 (4), p.188-192
issn 0950-3366
language eng
recordid cdi_proquest_miscellaneous_26494397
source IEEE Electronic Library (IEL)
subjects Hydroelectric power plants
Q1
title Application of a 138 kV 200 MW braking resistor
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-09T15%3A22%3A04IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Application%20of%20a%20138%20kV%20200%20MW%20braking%20resistor&rft.jtitle=Power%20engineering%20journal&rft.au=Peelo,%20D%20F&rft.date=1994-08-01&rft.volume=8&rft.issue=4&rft.spage=188&rft.epage=192&rft.pages=188-192&rft.issn=0950-3366&rft_id=info:doi/10.1049/pe:19940408&rft_dat=%3Cproquest_cross%3E142159%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=16899252&rft_id=info:pmid/&rfr_iscdi=true