Microstructure and Mechanical Properties of Al-Si Alloy Prepared by Spray Forming

Microstructure and Mechanical Properties of Al-Si Alloy Prepared by Spray Forming

Spray forming (SF) is a matter of special interest because of its simple process, low cost and the low oxygen content in products. In this experiment, three SF preforms were prepared of Al-Si alloy sprayed with various "gas to metal (G/M)" ratio. The microstructure and mechanical propertie...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of the Japan Society of Powder and Powder Metallurgy 1994, Vol.41 (8), p.927-932
Hauptverfasser: Tokizane, Naoki, Sano, Hideo, Shibue, Kazuhisa, Ohkubo, Yoshimasa
Format: Artikel
Sprache:eng ; jpn
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 932
container_issue 8
container_start_page 927
container_title Journal of the Japan Society of Powder and Powder Metallurgy
container_volume 41
creator Tokizane, Naoki
Sano, Hideo
Shibue, Kazuhisa
Ohkubo, Yoshimasa
description Spray forming (SF) is a matter of special interest because of its simple process, low cost and the low oxygen content in products. In this experiment, three SF preforms were prepared of Al-Si alloy sprayed with various "gas to metal (G/M)" ratio. The microstructure and mechanical properties of the preforms and extruded materials were investigated, and found to be controlled by the G/M ratio. Increase of the G/M ratio reduces primary silicon size and hence lowers wear resistance. On the contrary, the strength of the extruded materials increases with increasing G /M ratio.
doi_str_mv 10.2497/jjspm.41.927
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_26444757</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>26444757</sourcerecordid><originalsourceid>FETCH-LOGICAL-c3367-a3b01dc032e7db3b8bf012f0ea872be12da086a68750567d3a9509483ce972703</originalsourceid><addsrcrecordid>eNotkD1PwzAYhC0EElHpxg_wxETK64_E9lhVFJBaASrMluM44Cpf2MmQf09KWe6GO510D0K3BFaUK_FwPMa-WXGyUlRcoIRICakCwi9RAhmjqRRKXaNljL4AoLkAJVWC3vfehi4OYbTDGBw2bYn3zn6b1ltT47fQ9S4M3kXcVXhdpwc_a91Nc-J6E1yJiwkf-mAmvO1C49uvG3RVmTq65b8v0Of28WPznO5en142611qGctFalgBpLTAqBNlwQpZVEBoBc5IQQtHaGlA5iaXIoMsFyUzKgPFJbNOCSqALdDdebcP3c_o4qAbH62ra9O6boya5pxzkYm5eH8uno7G4CrdB9-YMGkC-oRO_6HTnOgZHfsFZ1xiEA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>26444757</pqid></control><display><type>article</type><title>Microstructure and Mechanical Properties of Al-Si Alloy Prepared by Spray Forming</title><source>J-STAGE Free</source><source>Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals</source><creator>Tokizane, Naoki ; Sano, Hideo ; Shibue, Kazuhisa ; Ohkubo, Yoshimasa</creator><creatorcontrib>Tokizane, Naoki ; Sano, Hideo ; Shibue, Kazuhisa ; Ohkubo, Yoshimasa</creatorcontrib><description>Spray forming (SF) is a matter of special interest because of its simple process, low cost and the low oxygen content in products. In this experiment, three SF preforms were prepared of Al-Si alloy sprayed with various "gas to metal (G/M)" ratio. The microstructure and mechanical properties of the preforms and extruded materials were investigated, and found to be controlled by the G/M ratio. Increase of the G/M ratio reduces primary silicon size and hence lowers wear resistance. On the contrary, the strength of the extruded materials increases with increasing G /M ratio.</description><identifier>ISSN: 0532-8799</identifier><identifier>EISSN: 1880-9014</identifier><identifier>DOI: 10.2497/jjspm.41.927</identifier><language>eng ; jpn</language><ispartof>Journal of the Japan Society of Powder and Powder Metallurgy, 1994, Vol.41 (8), p.927-932</ispartof><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c3367-a3b01dc032e7db3b8bf012f0ea872be12da086a68750567d3a9509483ce972703</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,4009,27902,27903,27904</link.rule.ids></links><search><creatorcontrib>Tokizane, Naoki</creatorcontrib><creatorcontrib>Sano, Hideo</creatorcontrib><creatorcontrib>Shibue, Kazuhisa</creatorcontrib><creatorcontrib>Ohkubo, Yoshimasa</creatorcontrib><title>Microstructure and Mechanical Properties of Al-Si Alloy Prepared by Spray Forming</title><title>Journal of the Japan Society of Powder and Powder Metallurgy</title><description>Spray forming (SF) is a matter of special interest because of its simple process, low cost and the low oxygen content in products. In this experiment, three SF preforms were prepared of Al-Si alloy sprayed with various "gas to metal (G/M)" ratio. The microstructure and mechanical properties of the preforms and extruded materials were investigated, and found to be controlled by the G/M ratio. Increase of the G/M ratio reduces primary silicon size and hence lowers wear resistance. On the contrary, the strength of the extruded materials increases with increasing G /M ratio.</description><issn>0532-8799</issn><issn>1880-9014</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1994</creationdate><recordtype>article</recordtype><recordid>eNotkD1PwzAYhC0EElHpxg_wxETK64_E9lhVFJBaASrMluM44Cpf2MmQf09KWe6GO510D0K3BFaUK_FwPMa-WXGyUlRcoIRICakCwi9RAhmjqRRKXaNljL4AoLkAJVWC3vfehi4OYbTDGBw2bYn3zn6b1ltT47fQ9S4M3kXcVXhdpwc_a91Nc-J6E1yJiwkf-mAmvO1C49uvG3RVmTq65b8v0Of28WPznO5en142611qGctFalgBpLTAqBNlwQpZVEBoBc5IQQtHaGlA5iaXIoMsFyUzKgPFJbNOCSqALdDdebcP3c_o4qAbH62ra9O6boya5pxzkYm5eH8uno7G4CrdB9-YMGkC-oRO_6HTnOgZHfsFZ1xiEA</recordid><startdate>1994</startdate><enddate>1994</enddate><creator>Tokizane, Naoki</creator><creator>Sano, Hideo</creator><creator>Shibue, Kazuhisa</creator><creator>Ohkubo, Yoshimasa</creator><scope>AAYXX</scope><scope>CITATION</scope><scope>7QF</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>1994</creationdate><title>Microstructure and Mechanical Properties of Al-Si Alloy Prepared by Spray Forming</title><author>Tokizane, Naoki ; Sano, Hideo ; Shibue, Kazuhisa ; Ohkubo, Yoshimasa</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c3367-a3b01dc032e7db3b8bf012f0ea872be12da086a68750567d3a9509483ce972703</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng ; jpn</language><creationdate>1994</creationdate><toplevel>online_resources</toplevel><creatorcontrib>Tokizane, Naoki</creatorcontrib><creatorcontrib>Sano, Hideo</creatorcontrib><creatorcontrib>Shibue, Kazuhisa</creatorcontrib><creatorcontrib>Ohkubo, Yoshimasa</creatorcontrib><collection>CrossRef</collection><collection>Aluminium Industry Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Journal of the Japan Society of Powder and Powder Metallurgy</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Tokizane, Naoki</au><au>Sano, Hideo</au><au>Shibue, Kazuhisa</au><au>Ohkubo, Yoshimasa</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Microstructure and Mechanical Properties of Al-Si Alloy Prepared by Spray Forming</atitle><jtitle>Journal of the Japan Society of Powder and Powder Metallurgy</jtitle><date>1994</date><risdate>1994</risdate><volume>41</volume><issue>8</issue><spage>927</spage><epage>932</epage><pages>927-932</pages><issn>0532-8799</issn><eissn>1880-9014</eissn><abstract>Spray forming (SF) is a matter of special interest because of its simple process, low cost and the low oxygen content in products. In this experiment, three SF preforms were prepared of Al-Si alloy sprayed with various "gas to metal (G/M)" ratio. The microstructure and mechanical properties of the preforms and extruded materials were investigated, and found to be controlled by the G/M ratio. Increase of the G/M ratio reduces primary silicon size and hence lowers wear resistance. On the contrary, the strength of the extruded materials increases with increasing G /M ratio.</abstract><doi>10.2497/jjspm.41.927</doi><tpages>6</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 0532-8799
ispartof Journal of the Japan Society of Powder and Powder Metallurgy, 1994, Vol.41 (8), p.927-932
issn 0532-8799
1880-9014
language eng ; jpn
recordid cdi_proquest_miscellaneous_26444757
source J-STAGE Free; Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals
title Microstructure and Mechanical Properties of Al-Si Alloy Prepared by Spray Forming
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-26T00%3A05%3A30IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Microstructure%20and%20Mechanical%20Properties%20of%20Al-Si%20Alloy%20Prepared%20by%20Spray%20Forming&rft.jtitle=Journal%20of%20the%20Japan%20Society%20of%20Powder%20and%20Powder%20Metallurgy&rft.au=Tokizane,%20Naoki&rft.date=1994&rft.volume=41&rft.issue=8&rft.spage=927&rft.epage=932&rft.pages=927-932&rft.issn=0532-8799&rft.eissn=1880-9014&rft_id=info:doi/10.2497/jjspm.41.927&rft_dat=%3Cproquest_cross%3E26444757%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=26444757&rft_id=info:pmid/&rfr_iscdi=true