Revisiting the Molar Mass and Conformation of Derivatized Fractionated Softwood Kraft Lignin

The limited utilization of reliable tools and standards for determination of the softwood kraft lignin molar mass and the corresponding molecular conformation hampers elucidation of the structure-property relationships of lignin. At issue, conventional size exclusion chromatography (SEC) is unable to robustly measure the molar mass because of a lack of calibration standards with a similar structure to lignin. In the present work, the determination of the absolute molar mass of acetylated technical lignin was revisited utilizing SEC combined with multi-angle light scattering with a band pass filter to suppress the fluorescence. Fractionated lignin isolated using sequential techniques of solvent and membrane methods was used to enhance the clarity of light-scattering profiles by narrowing the molar mass distribution of lignin fractions. Further information on the molecular conformation of derivatized samples was studied utilizing a differential viscometer, and chemical structures were identified by NMR spectroscopy analysis. Through the help of fractionation, intrinsic viscosity values were determined for the different fractions as a function of molecular weight cut-off membranes. The derivatized acetone-soluble lignin was found to possess a lower molecular weight and an extremely compact structure relative to the derivatized acetone-insoluble fraction based on a significantly lower “α” value in the Mark–Houwink–Sakurada plot (0.15 acetone-soluble vs 0.33 acetone-insoluble). The differences in geometry were supported by the linkage analysis from NMR showing the acetone-soluble part containing fewer native linkages. In both of these examples, kraft lignin behaved like a solid sphere, limiting the ability to provide entanglements between molecular chains. From this standpoint, macroscopic properties of lignin are justified with this knowledge of a dense and extremely compact structure.