A new mandibular deformation index predicts amount of bone deformation in edentulous patients treated with an implant-supported fixed prosthesis

Purpose: The present study was performed to examine the mandibular deformation during mouth opening in edentulous patients, treated with an implant-supported fixed prosthesis using strain gauges, and identify factors affecting deformation.Methods: Twenty patients with a fully edentulous mandible who received either 4 or ≥6 implants were included. The distal-most implants were placed mesial to the mental foramen (premolar region) in patients with 4 implants and distal to the mental foramen (molar region) in patients with ≥6 implants. Mandibular deformation during mouth opening was measured using strain gauges in two directions: anteroposterior direction and lateral direction between the distal-most implants on the left and right sides (arch width). The mandibular anatomy was evaluated using computed tomography.Results: Arch width reduction between the left and right implants during mouth opening ranged from 47.38 to 512.80 µm; the range of deformation was 0.12 to 15.14 µm in the anteroposterior direction. Furthermore, a significant positive correlation was noted between arch width reduction in the premolar region and the ratio between the symphyseal bone height and width (P = 0.0003, r = 0.72).Conclusion: The reduction in arch width was higher in the molar region than in the premolar region during mouth opening. Moreover, the reduction could be high in the mandibular symphyseal bone because of its greater height and lesser width. The ratio between the symphyseal bone height and width is defined as the mandibular deformation index (MDI) and is used to predict the rate of mandibular bone deformation.