The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films—I. Attached films

Impedance and gravimetric methods have been applied to study the uptake of water for paint films on metallic surfaces (referred to as attached films) exposed to aqueous solutions covering a range of chloride ion concentrations. The paint films were 25 μm experimental silicone modified polyester appl...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Corrosion science 1991, Vol.32 (10), p.1059-1084
1. Verfasser: Walter, G.W.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 1084
container_issue 10
container_start_page 1059
container_title Corrosion science
container_volume 32
creator Walter, G.W.
description Impedance and gravimetric methods have been applied to study the uptake of water for paint films on metallic surfaces (referred to as attached films) exposed to aqueous solutions covering a range of chloride ion concentrations. The paint films were 25 μm experimental silicone modified polyester applied to a Zn-55Al alloy coated steel substrate and contained different levels of flatting agent particles. Water uptake, calculated from gravimetric tests, increases as the amount of flatting agent increases. This relationship could not be resolved from the impedance tests. Gravimetric water uptake increases with time, and with decreasing solution chloride ion concentrations, in agreement with water uptake at 2 h calculated by the 1 kHz capacitance method. However, 1 kHz capacitance calculated water uptake at 1 d was unreliable due to other processes, such as paint film degradation, occurring in the strongest chloride ion solution (5% NaCl). These other processes affected the 1 kHz capacitance values and therefore could be detected by impedance, but not by gravimetric methods. Sample performance life has been obtained in different ways from the impedance tests, and is shown to decrease as solution chloride ion concentration increases. Impedance spectroscopy demonstrates that the corrosion resistance of the substrate drops soon after immersion and is controlled predominantly by the paint film resistance, which is related to the state of degradation of the paint film.
doi_str_mv 10.1016/0010-938X(91)90094-6
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_25494773</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>0010938X91900946</els_id><sourcerecordid>16099935</sourcerecordid><originalsourceid>FETCH-LOGICAL-c281t-ed374610fe5c484c8fdd593a61b973b6aea353e60caeaf0c624afece74b8e2f83</originalsourceid><addsrcrecordid>eNqFkb9u2zAQxokiAeo4fYMOnIJkkENKFCUuBYyg-QME6OIC3QiaPNZsJFEl6RTe8hCZ-3B5klB2kLGd7nD4vt_h7kPoMyULSii_JISSQlTtj3NBLwQhghX8A5rRthEFYYIfodm75CM6ifEXIaTMkxn6u9oAVuPYOa2S8wP2Frt-BKMGDbiHtPEm4uRxTFuzwymrwVrQKU7KPypBwNsxqYdMGQzWm84HZwBPKO0zY0jhDTzs3QZ-BmXed43KDQlb1_Xx5en5boGXKSm9AXOYnaJjq7oIn97qHH2__rq6ui3uv93cXS3vC122NBVgqoZxSizUmrVMt9aYWlSK07VoqjVXoKq6Ak507izRvGQqHwENW7dQ2raao7MDdwz-9xZikr2LGrpODeC3UZY1E6xpqv8KKSdCiLxsjthBqIOPMYCVY3C9CjtJiZxSk1MkcopECir3qUmebV8ONsjXPjoIMmoH-Y_Ghfx1abz7N-AVKVKjnA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>16099935</pqid></control><display><type>article</type><title>The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films—I. Attached films</title><source>Elsevier ScienceDirect Journals Complete</source><creator>Walter, G.W.</creator><creatorcontrib>Walter, G.W.</creatorcontrib><description>Impedance and gravimetric methods have been applied to study the uptake of water for paint films on metallic surfaces (referred to as attached films) exposed to aqueous solutions covering a range of chloride ion concentrations. The paint films were 25 μm experimental silicone modified polyester applied to a Zn-55Al alloy coated steel substrate and contained different levels of flatting agent particles. Water uptake, calculated from gravimetric tests, increases as the amount of flatting agent increases. This relationship could not be resolved from the impedance tests. Gravimetric water uptake increases with time, and with decreasing solution chloride ion concentrations, in agreement with water uptake at 2 h calculated by the 1 kHz capacitance method. However, 1 kHz capacitance calculated water uptake at 1 d was unreliable due to other processes, such as paint film degradation, occurring in the strongest chloride ion solution (5% NaCl). These other processes affected the 1 kHz capacitance values and therefore could be detected by impedance, but not by gravimetric methods. Sample performance life has been obtained in different ways from the impedance tests, and is shown to decrease as solution chloride ion concentration increases. Impedance spectroscopy demonstrates that the corrosion resistance of the substrate drops soon after immersion and is controlled predominantly by the paint film resistance, which is related to the state of degradation of the paint film.</description><identifier>ISSN: 0010-938X</identifier><identifier>EISSN: 1879-0496</identifier><identifier>DOI: 10.1016/0010-938X(91)90094-6</identifier><language>eng</language><publisher>Elsevier Ltd</publisher><subject>corrosion ; corrosion prevention ; metals ; paints ; steel ; surface properties ; water</subject><ispartof>Corrosion science, 1991, Vol.32 (10), p.1059-1084</ispartof><rights>1991</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c281t-ed374610fe5c484c8fdd593a61b973b6aea353e60caeaf0c624afece74b8e2f83</citedby><cites>FETCH-LOGICAL-c281t-ed374610fe5c484c8fdd593a61b973b6aea353e60caeaf0c624afece74b8e2f83</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/0010-938X(91)90094-6$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,4024,27923,27924,27925,45995</link.rule.ids></links><search><creatorcontrib>Walter, G.W.</creatorcontrib><title>The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films—I. Attached films</title><title>Corrosion science</title><description>Impedance and gravimetric methods have been applied to study the uptake of water for paint films on metallic surfaces (referred to as attached films) exposed to aqueous solutions covering a range of chloride ion concentrations. The paint films were 25 μm experimental silicone modified polyester applied to a Zn-55Al alloy coated steel substrate and contained different levels of flatting agent particles. Water uptake, calculated from gravimetric tests, increases as the amount of flatting agent increases. This relationship could not be resolved from the impedance tests. Gravimetric water uptake increases with time, and with decreasing solution chloride ion concentrations, in agreement with water uptake at 2 h calculated by the 1 kHz capacitance method. However, 1 kHz capacitance calculated water uptake at 1 d was unreliable due to other processes, such as paint film degradation, occurring in the strongest chloride ion solution (5% NaCl). These other processes affected the 1 kHz capacitance values and therefore could be detected by impedance, but not by gravimetric methods. Sample performance life has been obtained in different ways from the impedance tests, and is shown to decrease as solution chloride ion concentration increases. Impedance spectroscopy demonstrates that the corrosion resistance of the substrate drops soon after immersion and is controlled predominantly by the paint film resistance, which is related to the state of degradation of the paint film.</description><subject>corrosion</subject><subject>corrosion prevention</subject><subject>metals</subject><subject>paints</subject><subject>steel</subject><subject>surface properties</subject><subject>water</subject><issn>0010-938X</issn><issn>1879-0496</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1991</creationdate><recordtype>article</recordtype><recordid>eNqFkb9u2zAQxokiAeo4fYMOnIJkkENKFCUuBYyg-QME6OIC3QiaPNZsJFEl6RTe8hCZ-3B5klB2kLGd7nD4vt_h7kPoMyULSii_JISSQlTtj3NBLwQhghX8A5rRthEFYYIfodm75CM6ifEXIaTMkxn6u9oAVuPYOa2S8wP2Frt-BKMGDbiHtPEm4uRxTFuzwymrwVrQKU7KPypBwNsxqYdMGQzWm84HZwBPKO0zY0jhDTzs3QZ-BmXed43KDQlb1_Xx5en5boGXKSm9AXOYnaJjq7oIn97qHH2__rq6ui3uv93cXS3vC122NBVgqoZxSizUmrVMt9aYWlSK07VoqjVXoKq6Ak507izRvGQqHwENW7dQ2raao7MDdwz-9xZikr2LGrpODeC3UZY1E6xpqv8KKSdCiLxsjthBqIOPMYCVY3C9CjtJiZxSk1MkcopECir3qUmebV8ONsjXPjoIMmoH-Y_Ghfx1abz7N-AVKVKjnA</recordid><startdate>1991</startdate><enddate>1991</enddate><creator>Walter, G.W.</creator><general>Elsevier Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7T2</scope><scope>7TC</scope><scope>7U2</scope><scope>C1K</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>1991</creationdate><title>The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films—I. Attached films</title><author>Walter, G.W.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c281t-ed374610fe5c484c8fdd593a61b973b6aea353e60caeaf0c624afece74b8e2f83</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1991</creationdate><topic>corrosion</topic><topic>corrosion prevention</topic><topic>metals</topic><topic>paints</topic><topic>steel</topic><topic>surface properties</topic><topic>water</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Walter, G.W.</creatorcontrib><collection>CrossRef</collection><collection>Health and Safety Science Abstracts (Full archive)</collection><collection>Mechanical Engineering Abstracts</collection><collection>Safety Science and Risk</collection><collection>Environmental Sciences and Pollution Management</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Corrosion science</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Walter, G.W.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films—I. Attached films</atitle><jtitle>Corrosion science</jtitle><date>1991</date><risdate>1991</risdate><volume>32</volume><issue>10</issue><spage>1059</spage><epage>1084</epage><pages>1059-1084</pages><issn>0010-938X</issn><eissn>1879-0496</eissn><abstract>Impedance and gravimetric methods have been applied to study the uptake of water for paint films on metallic surfaces (referred to as attached films) exposed to aqueous solutions covering a range of chloride ion concentrations. The paint films were 25 μm experimental silicone modified polyester applied to a Zn-55Al alloy coated steel substrate and contained different levels of flatting agent particles. Water uptake, calculated from gravimetric tests, increases as the amount of flatting agent increases. This relationship could not be resolved from the impedance tests. Gravimetric water uptake increases with time, and with decreasing solution chloride ion concentrations, in agreement with water uptake at 2 h calculated by the 1 kHz capacitance method. However, 1 kHz capacitance calculated water uptake at 1 d was unreliable due to other processes, such as paint film degradation, occurring in the strongest chloride ion solution (5% NaCl). These other processes affected the 1 kHz capacitance values and therefore could be detected by impedance, but not by gravimetric methods. Sample performance life has been obtained in different ways from the impedance tests, and is shown to decrease as solution chloride ion concentration increases. Impedance spectroscopy demonstrates that the corrosion resistance of the substrate drops soon after immersion and is controlled predominantly by the paint film resistance, which is related to the state of degradation of the paint film.</abstract><pub>Elsevier Ltd</pub><doi>10.1016/0010-938X(91)90094-6</doi><tpages>26</tpages></addata></record>
fulltext fulltext
identifier ISSN: 0010-938X
ispartof Corrosion science, 1991, Vol.32 (10), p.1059-1084
issn 0010-938X
1879-0496
language eng
recordid cdi_proquest_miscellaneous_25494773
source Elsevier ScienceDirect Journals Complete
subjects corrosion
corrosion prevention
metals
paints
steel
surface properties
water
title The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films—I. Attached films
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-01T08%3A38%3A41IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=The%20application%20of%20impedance%20methods%20to%20study%20the%20effects%20of%20water%20uptake%20and%20chloride%20ion%20concentration%20on%20the%20degradation%20of%20paint%20films%E2%80%94I.%20Attached%20films&rft.jtitle=Corrosion%20science&rft.au=Walter,%20G.W.&rft.date=1991&rft.volume=32&rft.issue=10&rft.spage=1059&rft.epage=1084&rft.pages=1059-1084&rft.issn=0010-938X&rft.eissn=1879-0496&rft_id=info:doi/10.1016/0010-938X(91)90094-6&rft_dat=%3Cproquest_cross%3E16099935%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=16099935&rft_id=info:pmid/&rft_els_id=0010938X91900946&rfr_iscdi=true