Fault detection in a ball bearing system using a moving window
A signal processing method to detect flaws in a ball bearing system is proposed. The method is formulated theoretically and the performance of the method is expressed in terms of signal to noise ratios. To verify the method, ball bearings with man-made defects and an actual production line were test...
Gespeichert in:
| Veröffentlicht in: | Mechanical systems and signal processing 1991-11, Vol.5 (6), p.461-473 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Zusammenfassung: | A signal processing method to detect flaws in a ball bearing system is proposed. The method is formulated theoretically and the performance of the method is expressed in terms of signal to noise ratios. To verify the method, ball bearings with man-made defects and an actual production line were tested. |
|---|---|
| ISSN: | 0888-3270 1096-1216 |
| DOI: | 10.1016/0888-3270(91)90047-9 |