Effect of Microstructure on the Mechanical Properties of Bainitic Steel

Effect of Microstructure on the Mechanical Properties of Bainitic Steel

Microalloyed medium carbon steels had been developed for automobile parts. These steels had a little inferior toughness to that of quenched-tempered medium carbon steel. So, application of these steels were restricted to the automobile components of less severe circumstance. In this report, low carb...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:DENKI-SEIKO 1988/01/31, Vol.59(1), pp.15-26
Hauptverfasser: Usuki, Hideki, Namiki, Kunio, Iikubo, Tomohito
Format: Artikel
Sprache:eng ; jpn
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 26
container_issue 1
container_start_page 15
container_title DENKI-SEIKO
container_volume 59
creator Usuki, Hideki
Namiki, Kunio
Iikubo, Tomohito
description Microalloyed medium carbon steels had been developed for automobile parts. These steels had a little inferior toughness to that of quenched-tempered medium carbon steel. So, application of these steels were restricted to the automobile components of less severe circumstance. In this report, low carbon bainitic steel, RK603 (0.2C-0.85Mn-1.7Cr-0.06Nb) is studied especially focussing to the mechanical properties and the microstructures. The following results are obtained. (1) Tensile strength of RK603 depends on hardness and grain size, 0.2% proof stress, moreover, depends on morphology of bainitic structure. (2) Toughness of RK603 are improved by lowering the isothremal transformation temperature, but, does not depend on grain size. The reason of improving toughness can be explained by refinement of unit crack path. (3) Fatigue strength of RK603 depends on isothermal transformation temperature, and are a little inferior to that of quenched-tempered SCM440.
doi_str_mv 10.4262/denkiseiko.59.15
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_24878231</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>24878231</sourcerecordid><originalsourceid>FETCH-LOGICAL-c3125-777d87ece3ab60c6cbb27b829ec6d953a36cd05a41ac6d51293b71b46c6b85cb3</originalsourceid><addsrcrecordid>eNp9kU1PGzEQhi0EEhHlznElJG6b-mPttY80CikSqJWAs2VPZsGwWae298C_76apoMqhl7E0eh575jUhF4zOG6741zUObyFjeItzaeZMHpEZ01rUjZT6mMwoZazWQptTcp5z8JQqrqVp2Yysll2HUKrYVfcBUswljVDGhFUcqvKC1T3CixsCuL76meIWUwmYd_g3F4ZQAlQPBbH_Qk4612c8_3uekaeb5ePie333Y3W7uL6rQTAu67Zt17pFQOG8oqDAe956zQ2CWhspnFCwptI1zE0NybgRvmW-UaC8luDFGbna37tN8deIudhNyIB97waMY7a80a3mgk3g5QH4Gsc0TLNZ1hjdKN4oPVF0T-1Wzwk7u01h49K7ZdTuorWf0VppLJOTog4UCMWVEIeSXOj_J97uxddc3DN-vOSmSKHHfwRmuPwj7QuTH8z0F8niIH4DJa6cog</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1498462468</pqid></control><display><type>article</type><title>Effect of Microstructure on the Mechanical Properties of Bainitic Steel</title><source>J-STAGE Free</source><source>Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals</source><creator>Usuki, Hideki ; Namiki, Kunio ; Iikubo, Tomohito</creator><creatorcontrib>Usuki, Hideki ; Namiki, Kunio ; Iikubo, Tomohito</creatorcontrib><description>Microalloyed medium carbon steels had been developed for automobile parts. These steels had a little inferior toughness to that of quenched-tempered medium carbon steel. So, application of these steels were restricted to the automobile components of less severe circumstance. In this report, low carbon bainitic steel, RK603 (0.2C-0.85Mn-1.7Cr-0.06Nb) is studied especially focussing to the mechanical properties and the microstructures. The following results are obtained. (1) Tensile strength of RK603 depends on hardness and grain size, 0.2% proof stress, moreover, depends on morphology of bainitic structure. (2) Toughness of RK603 are improved by lowering the isothremal transformation temperature, but, does not depend on grain size. The reason of improving toughness can be explained by refinement of unit crack path. (3) Fatigue strength of RK603 depends on isothermal transformation temperature, and are a little inferior to that of quenched-tempered SCM440.</description><identifier>ISSN: 0011-8389</identifier><identifier>EISSN: 1883-4558</identifier><identifier>DOI: 10.4262/denkiseiko.59.15</identifier><language>eng ; jpn</language><publisher>Nagoya-City: Daido Steel Co., Ltd</publisher><ispartof>DENKI-SEIKO, 1988/01/31, Vol.59(1), pp.15-26</ispartof><rights>Daido Steel Co., Ltd.</rights><rights>Copyright Japan Science and Technology Agency 1988</rights><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c3125-777d87ece3ab60c6cbb27b829ec6d953a36cd05a41ac6d51293b71b46c6b85cb3</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,1877,27901,27902</link.rule.ids></links><search><creatorcontrib>Usuki, Hideki</creatorcontrib><creatorcontrib>Namiki, Kunio</creatorcontrib><creatorcontrib>Iikubo, Tomohito</creatorcontrib><title>Effect of Microstructure on the Mechanical Properties of Bainitic Steel</title><title>DENKI-SEIKO</title><addtitle>DENKI-SEIKO</addtitle><description>Microalloyed medium carbon steels had been developed for automobile parts. These steels had a little inferior toughness to that of quenched-tempered medium carbon steel. So, application of these steels were restricted to the automobile components of less severe circumstance. In this report, low carbon bainitic steel, RK603 (0.2C-0.85Mn-1.7Cr-0.06Nb) is studied especially focussing to the mechanical properties and the microstructures. The following results are obtained. (1) Tensile strength of RK603 depends on hardness and grain size, 0.2% proof stress, moreover, depends on morphology of bainitic structure. (2) Toughness of RK603 are improved by lowering the isothremal transformation temperature, but, does not depend on grain size. The reason of improving toughness can be explained by refinement of unit crack path. (3) Fatigue strength of RK603 depends on isothermal transformation temperature, and are a little inferior to that of quenched-tempered SCM440.</description><issn>0011-8389</issn><issn>1883-4558</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1988</creationdate><recordtype>article</recordtype><recordid>eNp9kU1PGzEQhi0EEhHlznElJG6b-mPttY80CikSqJWAs2VPZsGwWae298C_76apoMqhl7E0eh575jUhF4zOG6741zUObyFjeItzaeZMHpEZ01rUjZT6mMwoZazWQptTcp5z8JQqrqVp2Yysll2HUKrYVfcBUswljVDGhFUcqvKC1T3CixsCuL76meIWUwmYd_g3F4ZQAlQPBbH_Qk4612c8_3uekaeb5ePie333Y3W7uL6rQTAu67Zt17pFQOG8oqDAe956zQ2CWhspnFCwptI1zE0NybgRvmW-UaC8luDFGbna37tN8deIudhNyIB97waMY7a80a3mgk3g5QH4Gsc0TLNZ1hjdKN4oPVF0T-1Wzwk7u01h49K7ZdTuorWf0VppLJOTog4UCMWVEIeSXOj_J97uxddc3DN-vOSmSKHHfwRmuPwj7QuTH8z0F8niIH4DJa6cog</recordid><startdate>19880101</startdate><enddate>19880101</enddate><creator>Usuki, Hideki</creator><creator>Namiki, Kunio</creator><creator>Iikubo, Tomohito</creator><general>Daido Steel Co., Ltd</general><general>Daido Steel Co. Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7TB</scope><scope>8BQ</scope><scope>8FD</scope><scope>FR3</scope><scope>JG9</scope><scope>KR7</scope></search><sort><creationdate>19880101</creationdate><title>Effect of Microstructure on the Mechanical Properties of Bainitic Steel</title><author>Usuki, Hideki ; Namiki, Kunio ; Iikubo, Tomohito</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c3125-777d87ece3ab60c6cbb27b829ec6d953a36cd05a41ac6d51293b71b46c6b85cb3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng ; jpn</language><creationdate>1988</creationdate><toplevel>online_resources</toplevel><creatorcontrib>Usuki, Hideki</creatorcontrib><creatorcontrib>Namiki, Kunio</creatorcontrib><creatorcontrib>Iikubo, Tomohito</creatorcontrib><collection>CrossRef</collection><collection>Mechanical &amp; Transportation Engineering Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Civil Engineering Abstracts</collection><jtitle>DENKI-SEIKO</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Usuki, Hideki</au><au>Namiki, Kunio</au><au>Iikubo, Tomohito</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Effect of Microstructure on the Mechanical Properties of Bainitic Steel</atitle><jtitle>DENKI-SEIKO</jtitle><addtitle>DENKI-SEIKO</addtitle><date>1988-01-01</date><risdate>1988</risdate><volume>59</volume><issue>1</issue><spage>15</spage><epage>26</epage><pages>15-26</pages><artnum>15</artnum><issn>0011-8389</issn><eissn>1883-4558</eissn><abstract>Microalloyed medium carbon steels had been developed for automobile parts. These steels had a little inferior toughness to that of quenched-tempered medium carbon steel. So, application of these steels were restricted to the automobile components of less severe circumstance. In this report, low carbon bainitic steel, RK603 (0.2C-0.85Mn-1.7Cr-0.06Nb) is studied especially focussing to the mechanical properties and the microstructures. The following results are obtained. (1) Tensile strength of RK603 depends on hardness and grain size, 0.2% proof stress, moreover, depends on morphology of bainitic structure. (2) Toughness of RK603 are improved by lowering the isothremal transformation temperature, but, does not depend on grain size. The reason of improving toughness can be explained by refinement of unit crack path. (3) Fatigue strength of RK603 depends on isothermal transformation temperature, and are a little inferior to that of quenched-tempered SCM440.</abstract><cop>Nagoya-City</cop><pub>Daido Steel Co., Ltd</pub><doi>10.4262/denkiseiko.59.15</doi><tpages>12</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 0011-8389
ispartof DENKI-SEIKO, 1988/01/31, Vol.59(1), pp.15-26
issn 0011-8389
1883-4558
language eng ; jpn
recordid cdi_proquest_miscellaneous_24878231
source J-STAGE Free; Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals
title Effect of Microstructure on the Mechanical Properties of Bainitic Steel
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-09T07%3A28%3A56IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Effect%20of%20Microstructure%20on%20the%20Mechanical%20Properties%20of%20Bainitic%20Steel&rft.jtitle=DENKI-SEIKO&rft.au=Usuki,%20Hideki&rft.date=1988-01-01&rft.volume=59&rft.issue=1&rft.spage=15&rft.epage=26&rft.pages=15-26&rft.artnum=15&rft.issn=0011-8389&rft.eissn=1883-4558&rft_id=info:doi/10.4262/denkiseiko.59.15&rft_dat=%3Cproquest_cross%3E24878231%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1498462468&rft_id=info:pmid/&rfr_iscdi=true