All-polymeric high-Q optofluidic Fabry-Perot resonator
A full polymeric optofluidic Fabry-Perot (FP) resonator with a high quality factor (Q) is proposed and tested. The device is based on multilayer optical polymeric films that act as high reflectivity interference mirrors. The all-polymeric laminated structure avoids any deposition or etching process,...
Gespeichert in:
| Veröffentlicht in: | Optics letters 2021-01, Vol.46 (2), p.352-355 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 355 |
|---|---|
| container_issue | 2 |
| container_start_page | 352 |
| container_title | Optics letters |
| container_volume | 46 |
| creator | Testa, Genni Persichetti, Gianluca Bernini, Romeo |
| description | A full polymeric optofluidic Fabry-Perot (FP) resonator with a high quality factor (Q) is proposed and tested. The device is based on multilayer optical polymeric films that act as high reflectivity interference mirrors. The all-polymeric laminated structure avoids any deposition or etching process, simplifying the fabrication procedure while retaining a high quality optical surface. The measured quality factor of the FP resonator is 3.03×10
, and the finesse is 91 around 700 nm. The refractometric sensing properties have been measured, and a sensitivity of 314 nm/RIU with a limit of detection of 2.55×10
could be achieved. The device exhibits a very high figure of merit of 1.36×10
that is comparable with the performance attainable with sensors based on photonic crystal and whispering gallery mode resonators. |
| doi_str_mv | 10.1364/OL.412628 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_2478588138</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2478588138</sourcerecordid><originalsourceid>FETCH-LOGICAL-c313t-97452ec57af898e3727a147e4809f031d9fad12102f5921ea51781bf4f1d584c3</originalsourceid><addsrcrecordid>eNpd0E1LAzEQBuAgiq3Vg39ACl70kJrJxyY5lmJVWKiCnpd0N7Fbdps12T3035tS9eBcBoaHl-FF6BrIDFjGH1b5jAPNqDpBYxBMYy41P0VjAjzDWmg6QhcxbgkhmWTsHI0Y41wTKscomzcN7nyzb22oy-mm_tzgt6nveu-aoa7SaWnWYY9fbfD9NNjod6b34RKdOdNEe_WzJ-hj-fi-eMb56ullMc9xyYD1WEsuqC2FNE5pZZmk0gCXliuiHWFQaWcqoECoS1-CNQKkgrXjDiqheMkm6O6Y2wX_NdjYF20dS9s0Zmf9EAvKpRJKAVOJ3v6jWz-EXfouKQU0jTio-6Mqg48xWFd0oW5N2BdAikOZxSovjmUme_OTOKxbW_3J3_bYNw3ya_c</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2481222258</pqid></control><display><type>article</type><title>All-polymeric high-Q optofluidic Fabry-Perot resonator</title><source>Optica Publishing Group Journals</source><creator>Testa, Genni ; Persichetti, Gianluca ; Bernini, Romeo</creator><creatorcontrib>Testa, Genni ; Persichetti, Gianluca ; Bernini, Romeo</creatorcontrib><description>A full polymeric optofluidic Fabry-Perot (FP) resonator with a high quality factor (Q) is proposed and tested. The device is based on multilayer optical polymeric films that act as high reflectivity interference mirrors. The all-polymeric laminated structure avoids any deposition or etching process, simplifying the fabrication procedure while retaining a high quality optical surface. The measured quality factor of the FP resonator is 3.03×10
, and the finesse is 91 around 700 nm. The refractometric sensing properties have been measured, and a sensitivity of 314 nm/RIU with a limit of detection of 2.55×10
could be achieved. The device exhibits a very high figure of merit of 1.36×10
that is comparable with the performance attainable with sensors based on photonic crystal and whispering gallery mode resonators.</description><identifier>ISSN: 0146-9592</identifier><identifier>EISSN: 1539-4794</identifier><identifier>DOI: 10.1364/OL.412628</identifier><identifier>PMID: 33449027</identifier><language>eng</language><publisher>United States: Optical Society of America</publisher><subject>Figure of merit ; Multilayers ; Photonic crystals ; Polymer films ; Q factors ; Resonators</subject><ispartof>Optics letters, 2021-01, Vol.46 (2), p.352-355</ispartof><rights>Copyright Optical Society of America Jan 15, 2021</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c313t-97452ec57af898e3727a147e4809f031d9fad12102f5921ea51781bf4f1d584c3</citedby><cites>FETCH-LOGICAL-c313t-97452ec57af898e3727a147e4809f031d9fad12102f5921ea51781bf4f1d584c3</cites><orcidid>0000-0001-8424-9791 ; 0000-0003-1205-5781</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,3258,27924,27925</link.rule.ids><backlink>$$Uhttps://www.ncbi.nlm.nih.gov/pubmed/33449027$$D View this record in MEDLINE/PubMed$$Hfree_for_read</backlink></links><search><creatorcontrib>Testa, Genni</creatorcontrib><creatorcontrib>Persichetti, Gianluca</creatorcontrib><creatorcontrib>Bernini, Romeo</creatorcontrib><title>All-polymeric high-Q optofluidic Fabry-Perot resonator</title><title>Optics letters</title><addtitle>Opt Lett</addtitle><description>A full polymeric optofluidic Fabry-Perot (FP) resonator with a high quality factor (Q) is proposed and tested. The device is based on multilayer optical polymeric films that act as high reflectivity interference mirrors. The all-polymeric laminated structure avoids any deposition or etching process, simplifying the fabrication procedure while retaining a high quality optical surface. The measured quality factor of the FP resonator is 3.03×10
, and the finesse is 91 around 700 nm. The refractometric sensing properties have been measured, and a sensitivity of 314 nm/RIU with a limit of detection of 2.55×10
could be achieved. The device exhibits a very high figure of merit of 1.36×10
that is comparable with the performance attainable with sensors based on photonic crystal and whispering gallery mode resonators.</description><subject>Figure of merit</subject><subject>Multilayers</subject><subject>Photonic crystals</subject><subject>Polymer films</subject><subject>Q factors</subject><subject>Resonators</subject><issn>0146-9592</issn><issn>1539-4794</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2021</creationdate><recordtype>article</recordtype><recordid>eNpd0E1LAzEQBuAgiq3Vg39ACl70kJrJxyY5lmJVWKiCnpd0N7Fbdps12T3035tS9eBcBoaHl-FF6BrIDFjGH1b5jAPNqDpBYxBMYy41P0VjAjzDWmg6QhcxbgkhmWTsHI0Y41wTKscomzcN7nyzb22oy-mm_tzgt6nveu-aoa7SaWnWYY9fbfD9NNjod6b34RKdOdNEe_WzJ-hj-fi-eMb56ullMc9xyYD1WEsuqC2FNE5pZZmk0gCXliuiHWFQaWcqoECoS1-CNQKkgrXjDiqheMkm6O6Y2wX_NdjYF20dS9s0Zmf9EAvKpRJKAVOJ3v6jWz-EXfouKQU0jTio-6Mqg48xWFd0oW5N2BdAikOZxSovjmUme_OTOKxbW_3J3_bYNw3ya_c</recordid><startdate>20210115</startdate><enddate>20210115</enddate><creator>Testa, Genni</creator><creator>Persichetti, Gianluca</creator><creator>Bernini, Romeo</creator><general>Optical Society of America</general><scope>NPM</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SP</scope><scope>7U5</scope><scope>8FD</scope><scope>H8D</scope><scope>L7M</scope><scope>7X8</scope><orcidid>https://orcid.org/0000-0001-8424-9791</orcidid><orcidid>https://orcid.org/0000-0003-1205-5781</orcidid></search><sort><creationdate>20210115</creationdate><title>All-polymeric high-Q optofluidic Fabry-Perot resonator</title><author>Testa, Genni ; Persichetti, Gianluca ; Bernini, Romeo</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c313t-97452ec57af898e3727a147e4809f031d9fad12102f5921ea51781bf4f1d584c3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2021</creationdate><topic>Figure of merit</topic><topic>Multilayers</topic><topic>Photonic crystals</topic><topic>Polymer films</topic><topic>Q factors</topic><topic>Resonators</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Testa, Genni</creatorcontrib><creatorcontrib>Persichetti, Gianluca</creatorcontrib><creatorcontrib>Bernini, Romeo</creatorcontrib><collection>PubMed</collection><collection>CrossRef</collection><collection>Electronics & Communications Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>Technology Research Database</collection><collection>Aerospace Database</collection><collection>Advanced Technologies Database with Aerospace</collection><collection>MEDLINE - Academic</collection><jtitle>Optics letters</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Testa, Genni</au><au>Persichetti, Gianluca</au><au>Bernini, Romeo</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>All-polymeric high-Q optofluidic Fabry-Perot resonator</atitle><jtitle>Optics letters</jtitle><addtitle>Opt Lett</addtitle><date>2021-01-15</date><risdate>2021</risdate><volume>46</volume><issue>2</issue><spage>352</spage><epage>355</epage><pages>352-355</pages><issn>0146-9592</issn><eissn>1539-4794</eissn><abstract>A full polymeric optofluidic Fabry-Perot (FP) resonator with a high quality factor (Q) is proposed and tested. The device is based on multilayer optical polymeric films that act as high reflectivity interference mirrors. The all-polymeric laminated structure avoids any deposition or etching process, simplifying the fabrication procedure while retaining a high quality optical surface. The measured quality factor of the FP resonator is 3.03×10
, and the finesse is 91 around 700 nm. The refractometric sensing properties have been measured, and a sensitivity of 314 nm/RIU with a limit of detection of 2.55×10
could be achieved. The device exhibits a very high figure of merit of 1.36×10
that is comparable with the performance attainable with sensors based on photonic crystal and whispering gallery mode resonators.</abstract><cop>United States</cop><pub>Optical Society of America</pub><pmid>33449027</pmid><doi>10.1364/OL.412628</doi><tpages>4</tpages><orcidid>https://orcid.org/0000-0001-8424-9791</orcidid><orcidid>https://orcid.org/0000-0003-1205-5781</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0146-9592 |
| ispartof | Optics letters, 2021-01, Vol.46 (2), p.352-355 |
| issn | 0146-9592 1539-4794 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_2478588138 |
| source | Optica Publishing Group Journals |
| subjects | Figure of merit Multilayers Photonic crystals Polymer films Q factors Resonators |
| title | All-polymeric high-Q optofluidic Fabry-Perot resonator |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-04T00%3A23%3A44IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=All-polymeric%20high-Q%20optofluidic%20Fabry-Perot%20resonator&rft.jtitle=Optics%20letters&rft.au=Testa,%20Genni&rft.date=2021-01-15&rft.volume=46&rft.issue=2&rft.spage=352&rft.epage=355&rft.pages=352-355&rft.issn=0146-9592&rft.eissn=1539-4794&rft_id=info:doi/10.1364/OL.412628&rft_dat=%3Cproquest_cross%3E2478588138%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2481222258&rft_id=info:pmid/33449027&rfr_iscdi=true |