Statistical analysis of trace contaminants measured in biogas

Biogas is a renewable energy fuel that can be treated to increase purity so that the resulting “biomethane” can be injected into the natural gas pipeline grid. The trace contaminants in biogas and biomethane make up a small fraction of the total gas but they still have the potential to cause adverse health effects and pipeline corrosion. This study investigates the statistical distributions of 17 trace metals, six mercaptans, hydrogen sulfide, ammonia, and six additional trace organic compounds. Twelve of these 31 trace contaminants have been previously identified as constituents of concern based on their toxicity profiles and through health risk assessment studies. Untreated and treated samples of biogas were collected from 12 different biogas production facilities using diverse feedstocks throughout California. Results show that most biogas trace contaminants follow a single log-normal distribution or a bi-modal lognormal distribution depending on the type of production facility. Treatment of biogas demonstrates some removal for all trace contaminants, but four constituents of concern (copper, lead, hydrogen sulfide, and methyl mercaptan) are predicted to have a >1% probability of exceeding trigger levels even after common treatments. This finding suggests that enhanced monitoring may be warranted for these contaminants. Several trace metals and volatile organic compounds (VOCs) were found to have seasonal trends with greater concentrations in the summer and lower concentrations in the winter suggesting that seasonal variation should be considered in future monitoring plans. [Display omitted] •Concentrations for most trace contaminants followed a log-normal profile.•Some contaminant concentrations had >1% chance of exceeding safe levels.•Biogas treatment reduced concentrations of many trace contaminants.•Concentrations for some contaminants were greater in summer than in winter.