Energy efficient sludge solubilization by microwave irradiation under carbon nanotube (CNT)-coated condition
Microwaves (MW) have great potential for sludge solubilization, and carbon materials can act as good microwave absorbers and heat transfer media because of their high dielectric loss tangent and thermal conductivity. In this study, carbon nanotube-coated MW vessels were developed by preparing a sila...
Gespeichert in:
Veröffentlicht in: | Journal of environmental management 2020-04, Vol.259, p.110089-110089, Article 110089 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 110089 |
---|---|
container_issue | |
container_start_page | 110089 |
container_title | Journal of environmental management |
container_volume | 259 |
creator | Kang, Kyeong Hwan Kim, Junghyeon Jeon, Hyeonjin Byun, Imgyu |
description | Microwaves (MW) have great potential for sludge solubilization, and carbon materials can act as good microwave absorbers and heat transfer media because of their high dielectric loss tangent and thermal conductivity. In this study, carbon nanotube-coated MW vessels were developed by preparing a silane-CNT mixture and spray coating. In addition, sludge solubilization by microwave irradiation was performed to evaluate the effects of the CNT-coating at different initial total suspended solid (TSS) concentrations, target temperatures, and MW irradiation times in the uncoated and CNT-coated MW vessels. The sludge solubilization efficiency increased with increasing MW irradiation time and temperature and followed a first-order reaction in both vessels. However, the energy requirement to maintain the temperature was reduced in the CNT-coated MW vessel compared to the uncoated vessel. In addition, the Arrhenius equation revealed the catalytic site in the CNT-coated MW vessel to have a temperature of around 130 °C at an average sludge temperature of 100 °C. The maximum chemical oxygen demand (COD) solubilization and soluble COD (sCOD) increase per MW energy used were 1.64 and 1.67 times higher in the CNT-coated MW vessel than in the uncoated vessel, respectively. The increase in soluble total nitrogen and phosphorus in the CNT-coated MW vessel was attributed to cell wall destruction and intracellular protoplast dissolution, because of the acceleration of the MW thermal effect and high conductivity of CNTs, as well as the MW-induced cell wall and membrane disruption by hot spots on the CNT surface. This suggests that CNTs can be applied to increase the energy efficiency in MW-based pretreatment methods.
•Carbon nanotube (CNT)-coated microwave (MW) vessel was developed to enhance MW energy efficiency and sludge solubilization.•The consumed energy of the CNT-coated vessel for the target temperature was reduced by 10.1% compared to the uncoated one.•The temperature on the catalytic sites in the CNT-coated vessel was 30.6% higher than that of sludge in the same vessel.•In the CNT-coated vessel, the specific sCOD increase was 94.83 mg sCOD/kJ, which was 1.80 times that of the uncoated one. |
doi_str_mv | 10.1016/j.jenvman.2020.110089 |
format | Article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_2338083214</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S030147972030027X</els_id><sourcerecordid>2338083214</sourcerecordid><originalsourceid>FETCH-LOGICAL-c365t-86e46597509c7ba80f5ad82ecb1b70063f399b4f9d6c428b7c21cb57f68546a93</originalsourceid><addsrcrecordid>eNqFkEtP3DAQgK2qVdnS_gSQj3DIdhzn5ROqVvQhIbjA2fJjgrxKbLCTRcuvx6ssXHsazfibGc9HyBmDNQPW_Nyut-h3o_LrEspcYwCd-ERWDERddA2Hz2QFHFhRtaI9Id9S2gIAL1n7lZxwJkoBnK_IcO0xPu4p9r0zDv1E0zDbR6QpDLN2g3tVkwue6j0dnYnhRe2QuhiVdcvD7C1GalTUOfHKh2nWSC82t_eXhQlqQktN8NYd4O_kS6-GhD-O8ZQ8_L6-3_wtbu7-_Nv8uikMb-op_x6rphZtDcK0WnXQ18p2JRrNdAvQ8J4Loate2MZUZadbUzKj67ZvurpqlOCn5GKZ-xTD84xpkqNLBodBeQxzkiXnHXTZRZXRekHzbSlF7OVTdKOKe8lAHkTLrTyKlgfRchGd-86PK2Y9ov3oejebgasFwHzozmGU6eDXoHURzSRtcP9Z8QZyaJK7</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2338083214</pqid></control><display><type>article</type><title>Energy efficient sludge solubilization by microwave irradiation under carbon nanotube (CNT)-coated condition</title><source>MEDLINE</source><source>Elsevier ScienceDirect Journals Complete</source><creator>Kang, Kyeong Hwan ; Kim, Junghyeon ; Jeon, Hyeonjin ; Byun, Imgyu</creator><creatorcontrib>Kang, Kyeong Hwan ; Kim, Junghyeon ; Jeon, Hyeonjin ; Byun, Imgyu</creatorcontrib><description>Microwaves (MW) have great potential for sludge solubilization, and carbon materials can act as good microwave absorbers and heat transfer media because of their high dielectric loss tangent and thermal conductivity. In this study, carbon nanotube-coated MW vessels were developed by preparing a silane-CNT mixture and spray coating. In addition, sludge solubilization by microwave irradiation was performed to evaluate the effects of the CNT-coating at different initial total suspended solid (TSS) concentrations, target temperatures, and MW irradiation times in the uncoated and CNT-coated MW vessels. The sludge solubilization efficiency increased with increasing MW irradiation time and temperature and followed a first-order reaction in both vessels. However, the energy requirement to maintain the temperature was reduced in the CNT-coated MW vessel compared to the uncoated vessel. In addition, the Arrhenius equation revealed the catalytic site in the CNT-coated MW vessel to have a temperature of around 130 °C at an average sludge temperature of 100 °C. The maximum chemical oxygen demand (COD) solubilization and soluble COD (sCOD) increase per MW energy used were 1.64 and 1.67 times higher in the CNT-coated MW vessel than in the uncoated vessel, respectively. The increase in soluble total nitrogen and phosphorus in the CNT-coated MW vessel was attributed to cell wall destruction and intracellular protoplast dissolution, because of the acceleration of the MW thermal effect and high conductivity of CNTs, as well as the MW-induced cell wall and membrane disruption by hot spots on the CNT surface. This suggests that CNTs can be applied to increase the energy efficiency in MW-based pretreatment methods.
•Carbon nanotube (CNT)-coated microwave (MW) vessel was developed to enhance MW energy efficiency and sludge solubilization.•The consumed energy of the CNT-coated vessel for the target temperature was reduced by 10.1% compared to the uncoated one.•The temperature on the catalytic sites in the CNT-coated vessel was 30.6% higher than that of sludge in the same vessel.•In the CNT-coated vessel, the specific sCOD increase was 94.83 mg sCOD/kJ, which was 1.80 times that of the uncoated one.</description><identifier>ISSN: 0301-4797</identifier><identifier>EISSN: 1095-8630</identifier><identifier>DOI: 10.1016/j.jenvman.2020.110089</identifier><identifier>PMID: 31929033</identifier><language>eng</language><publisher>England: Elsevier Ltd</publisher><subject>Biological Oxygen Demand Analysis ; Carbon nanotube-coated microwave vessel ; Hot spots ; Microwave energy efficiency ; Microwave irradiation ; Microwaves ; Nanotubes, Carbon ; Sewage ; Sludge solubilization ; Temperature</subject><ispartof>Journal of environmental management, 2020-04, Vol.259, p.110089-110089, Article 110089</ispartof><rights>2020 Elsevier Ltd</rights><rights>Copyright © 2020 Elsevier Ltd. All rights reserved.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c365t-86e46597509c7ba80f5ad82ecb1b70063f399b4f9d6c428b7c21cb57f68546a93</citedby><cites>FETCH-LOGICAL-c365t-86e46597509c7ba80f5ad82ecb1b70063f399b4f9d6c428b7c21cb57f68546a93</cites><orcidid>0000-0003-4015-4437</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.jenvman.2020.110089$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3548,27923,27924,45994</link.rule.ids><backlink>$$Uhttps://www.ncbi.nlm.nih.gov/pubmed/31929033$$D View this record in MEDLINE/PubMed$$Hfree_for_read</backlink></links><search><creatorcontrib>Kang, Kyeong Hwan</creatorcontrib><creatorcontrib>Kim, Junghyeon</creatorcontrib><creatorcontrib>Jeon, Hyeonjin</creatorcontrib><creatorcontrib>Byun, Imgyu</creatorcontrib><title>Energy efficient sludge solubilization by microwave irradiation under carbon nanotube (CNT)-coated condition</title><title>Journal of environmental management</title><addtitle>J Environ Manage</addtitle><description>Microwaves (MW) have great potential for sludge solubilization, and carbon materials can act as good microwave absorbers and heat transfer media because of their high dielectric loss tangent and thermal conductivity. In this study, carbon nanotube-coated MW vessels were developed by preparing a silane-CNT mixture and spray coating. In addition, sludge solubilization by microwave irradiation was performed to evaluate the effects of the CNT-coating at different initial total suspended solid (TSS) concentrations, target temperatures, and MW irradiation times in the uncoated and CNT-coated MW vessels. The sludge solubilization efficiency increased with increasing MW irradiation time and temperature and followed a first-order reaction in both vessels. However, the energy requirement to maintain the temperature was reduced in the CNT-coated MW vessel compared to the uncoated vessel. In addition, the Arrhenius equation revealed the catalytic site in the CNT-coated MW vessel to have a temperature of around 130 °C at an average sludge temperature of 100 °C. The maximum chemical oxygen demand (COD) solubilization and soluble COD (sCOD) increase per MW energy used were 1.64 and 1.67 times higher in the CNT-coated MW vessel than in the uncoated vessel, respectively. The increase in soluble total nitrogen and phosphorus in the CNT-coated MW vessel was attributed to cell wall destruction and intracellular protoplast dissolution, because of the acceleration of the MW thermal effect and high conductivity of CNTs, as well as the MW-induced cell wall and membrane disruption by hot spots on the CNT surface. This suggests that CNTs can be applied to increase the energy efficiency in MW-based pretreatment methods.
•Carbon nanotube (CNT)-coated microwave (MW) vessel was developed to enhance MW energy efficiency and sludge solubilization.•The consumed energy of the CNT-coated vessel for the target temperature was reduced by 10.1% compared to the uncoated one.•The temperature on the catalytic sites in the CNT-coated vessel was 30.6% higher than that of sludge in the same vessel.•In the CNT-coated vessel, the specific sCOD increase was 94.83 mg sCOD/kJ, which was 1.80 times that of the uncoated one.</description><subject>Biological Oxygen Demand Analysis</subject><subject>Carbon nanotube-coated microwave vessel</subject><subject>Hot spots</subject><subject>Microwave energy efficiency</subject><subject>Microwave irradiation</subject><subject>Microwaves</subject><subject>Nanotubes, Carbon</subject><subject>Sewage</subject><subject>Sludge solubilization</subject><subject>Temperature</subject><issn>0301-4797</issn><issn>1095-8630</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2020</creationdate><recordtype>article</recordtype><sourceid>EIF</sourceid><recordid>eNqFkEtP3DAQgK2qVdnS_gSQj3DIdhzn5ROqVvQhIbjA2fJjgrxKbLCTRcuvx6ssXHsazfibGc9HyBmDNQPW_Nyut-h3o_LrEspcYwCd-ERWDERddA2Hz2QFHFhRtaI9Id9S2gIAL1n7lZxwJkoBnK_IcO0xPu4p9r0zDv1E0zDbR6QpDLN2g3tVkwue6j0dnYnhRe2QuhiVdcvD7C1GalTUOfHKh2nWSC82t_eXhQlqQktN8NYd4O_kS6-GhD-O8ZQ8_L6-3_wtbu7-_Nv8uikMb-op_x6rphZtDcK0WnXQ18p2JRrNdAvQ8J4Loate2MZUZadbUzKj67ZvurpqlOCn5GKZ-xTD84xpkqNLBodBeQxzkiXnHXTZRZXRekHzbSlF7OVTdKOKe8lAHkTLrTyKlgfRchGd-86PK2Y9ov3oejebgasFwHzozmGU6eDXoHURzSRtcP9Z8QZyaJK7</recordid><startdate>20200401</startdate><enddate>20200401</enddate><creator>Kang, Kyeong Hwan</creator><creator>Kim, Junghyeon</creator><creator>Jeon, Hyeonjin</creator><creator>Byun, Imgyu</creator><general>Elsevier Ltd</general><scope>CGR</scope><scope>CUY</scope><scope>CVF</scope><scope>ECM</scope><scope>EIF</scope><scope>NPM</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7X8</scope><orcidid>https://orcid.org/0000-0003-4015-4437</orcidid></search><sort><creationdate>20200401</creationdate><title>Energy efficient sludge solubilization by microwave irradiation under carbon nanotube (CNT)-coated condition</title><author>Kang, Kyeong Hwan ; Kim, Junghyeon ; Jeon, Hyeonjin ; Byun, Imgyu</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c365t-86e46597509c7ba80f5ad82ecb1b70063f399b4f9d6c428b7c21cb57f68546a93</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2020</creationdate><topic>Biological Oxygen Demand Analysis</topic><topic>Carbon nanotube-coated microwave vessel</topic><topic>Hot spots</topic><topic>Microwave energy efficiency</topic><topic>Microwave irradiation</topic><topic>Microwaves</topic><topic>Nanotubes, Carbon</topic><topic>Sewage</topic><topic>Sludge solubilization</topic><topic>Temperature</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Kang, Kyeong Hwan</creatorcontrib><creatorcontrib>Kim, Junghyeon</creatorcontrib><creatorcontrib>Jeon, Hyeonjin</creatorcontrib><creatorcontrib>Byun, Imgyu</creatorcontrib><collection>Medline</collection><collection>MEDLINE</collection><collection>MEDLINE (Ovid)</collection><collection>MEDLINE</collection><collection>MEDLINE</collection><collection>PubMed</collection><collection>CrossRef</collection><collection>MEDLINE - Academic</collection><jtitle>Journal of environmental management</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Kang, Kyeong Hwan</au><au>Kim, Junghyeon</au><au>Jeon, Hyeonjin</au><au>Byun, Imgyu</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Energy efficient sludge solubilization by microwave irradiation under carbon nanotube (CNT)-coated condition</atitle><jtitle>Journal of environmental management</jtitle><addtitle>J Environ Manage</addtitle><date>2020-04-01</date><risdate>2020</risdate><volume>259</volume><spage>110089</spage><epage>110089</epage><pages>110089-110089</pages><artnum>110089</artnum><issn>0301-4797</issn><eissn>1095-8630</eissn><abstract>Microwaves (MW) have great potential for sludge solubilization, and carbon materials can act as good microwave absorbers and heat transfer media because of their high dielectric loss tangent and thermal conductivity. In this study, carbon nanotube-coated MW vessels were developed by preparing a silane-CNT mixture and spray coating. In addition, sludge solubilization by microwave irradiation was performed to evaluate the effects of the CNT-coating at different initial total suspended solid (TSS) concentrations, target temperatures, and MW irradiation times in the uncoated and CNT-coated MW vessels. The sludge solubilization efficiency increased with increasing MW irradiation time and temperature and followed a first-order reaction in both vessels. However, the energy requirement to maintain the temperature was reduced in the CNT-coated MW vessel compared to the uncoated vessel. In addition, the Arrhenius equation revealed the catalytic site in the CNT-coated MW vessel to have a temperature of around 130 °C at an average sludge temperature of 100 °C. The maximum chemical oxygen demand (COD) solubilization and soluble COD (sCOD) increase per MW energy used were 1.64 and 1.67 times higher in the CNT-coated MW vessel than in the uncoated vessel, respectively. The increase in soluble total nitrogen and phosphorus in the CNT-coated MW vessel was attributed to cell wall destruction and intracellular protoplast dissolution, because of the acceleration of the MW thermal effect and high conductivity of CNTs, as well as the MW-induced cell wall and membrane disruption by hot spots on the CNT surface. This suggests that CNTs can be applied to increase the energy efficiency in MW-based pretreatment methods.
•Carbon nanotube (CNT)-coated microwave (MW) vessel was developed to enhance MW energy efficiency and sludge solubilization.•The consumed energy of the CNT-coated vessel for the target temperature was reduced by 10.1% compared to the uncoated one.•The temperature on the catalytic sites in the CNT-coated vessel was 30.6% higher than that of sludge in the same vessel.•In the CNT-coated vessel, the specific sCOD increase was 94.83 mg sCOD/kJ, which was 1.80 times that of the uncoated one.</abstract><cop>England</cop><pub>Elsevier Ltd</pub><pmid>31929033</pmid><doi>10.1016/j.jenvman.2020.110089</doi><tpages>1</tpages><orcidid>https://orcid.org/0000-0003-4015-4437</orcidid></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0301-4797 |
ispartof | Journal of environmental management, 2020-04, Vol.259, p.110089-110089, Article 110089 |
issn | 0301-4797 1095-8630 |
language | eng |
recordid | cdi_proquest_miscellaneous_2338083214 |
source | MEDLINE; Elsevier ScienceDirect Journals Complete |
subjects | Biological Oxygen Demand Analysis Carbon nanotube-coated microwave vessel Hot spots Microwave energy efficiency Microwave irradiation Microwaves Nanotubes, Carbon Sewage Sludge solubilization Temperature |
title | Energy efficient sludge solubilization by microwave irradiation under carbon nanotube (CNT)-coated condition |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-10T20%3A08%3A03IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Energy%20efficient%20sludge%20solubilization%20by%20microwave%20irradiation%20under%20carbon%20nanotube%20(CNT)-coated%20condition&rft.jtitle=Journal%20of%20environmental%20management&rft.au=Kang,%20Kyeong%20Hwan&rft.date=2020-04-01&rft.volume=259&rft.spage=110089&rft.epage=110089&rft.pages=110089-110089&rft.artnum=110089&rft.issn=0301-4797&rft.eissn=1095-8630&rft_id=info:doi/10.1016/j.jenvman.2020.110089&rft_dat=%3Cproquest_cross%3E2338083214%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2338083214&rft_id=info:pmid/31929033&rft_els_id=S030147972030027X&rfr_iscdi=true |