Structural and electrical properties of the Al/p-Cu sub(2)ZnSnS sub(4) thin film schottky diode
In order to calculate the Schottky barrier parameters and to explain the resulting effects, the conduction mechanisms in a Schottky barrier should be known. In the present study, we investigated the structural and electrical properties of Al/p-Cu sub(2)ZnSnS sub(4) (CZTS)/Mo thin film Schottky junct...
Gespeichert in:
Veröffentlicht in: | Journal of materials science. Materials in electronics 2017-04, Vol.28 (7), p.5315-5322 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 5322 |
---|---|
container_issue | 7 |
container_start_page | 5315 |
container_title | Journal of materials science. Materials in electronics |
container_volume | 28 |
creator | Touati, R Trabelsi, I Rabeh, MBen Kanzari, M |
description | In order to calculate the Schottky barrier parameters and to explain the resulting effects, the conduction mechanisms in a Schottky barrier should be known. In the present study, we investigated the structural and electrical properties of Al/p-Cu sub(2)ZnSnS sub(4) (CZTS)/Mo thin film Schottky junction. Structural characterization was carried out using X-Ray diffraction and Raman Scattering whereas electrical characterization was performed by using the current-voltage (I-V) characteristics and by recording the AC impedance spectroscopy over a wide range of temperature up to 558 K in the frequency range 5 Hz-13 MHz. The complex impedance plots display one semicircle with equivalent circuit functions as typical parallel RC connected to a serial resistance. The characteristic parameters such as barrier height, ideality factor and series resistance have been calculated from the I-V measurements. At room temperature, this heterostructure has shown non-ideal Schottky behavior with an ideality factor of 1.56 and 0.829 mu A as a saturation current. By the impedance spectroscopy technique, we have found that all of the serial resistance R sub(s) and the parallel resistance Rp decrease by increasing temperature whereas the capacitance C sub(0) increased from 0.76 to 1.07 mu F. From the Arrhenius diagram, we estimated activation energy at 0.289 eV which represents the energy difference between the trap level and the valence band. |
doi_str_mv | 10.1007/s10854-016-6189-3 |
format | Article |
fullrecord | <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_miscellaneous_1893901679</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1893901679</sourcerecordid><originalsourceid>FETCH-proquest_miscellaneous_18939016793</originalsourceid><addsrcrecordid>eNqVT71OwzAYtBCVCKUPwOaxHUzt2PkbUQViDwPqEgXni-rWtYM_e-DtsRAvwHR3utPpjpBHwZ8E580eBW8rxbioWS3ajskbUoiqkUy15cctKXhXNUxVZXlH7hHPnPNaybYgQx9D0jGF0dLRTRQs6BiMznIJfoEQDSD1M40noM92v7BDopg-t-Xu6HrX_3K1y7ZxdDb2SlGffIyXbzoZP8EDWc2jRdj84ZpsX1_eD28st38lwDhcDWqwdnTgEw55u-zyi6aT_4j-AEs-Tfc</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1893901679</pqid></control><display><type>article</type><title>Structural and electrical properties of the Al/p-Cu sub(2)ZnSnS sub(4) thin film schottky diode</title><source>SpringerNature Journals</source><creator>Touati, R ; Trabelsi, I ; Rabeh, MBen ; Kanzari, M</creator><creatorcontrib>Touati, R ; Trabelsi, I ; Rabeh, MBen ; Kanzari, M</creatorcontrib><description>In order to calculate the Schottky barrier parameters and to explain the resulting effects, the conduction mechanisms in a Schottky barrier should be known. In the present study, we investigated the structural and electrical properties of Al/p-Cu sub(2)ZnSnS sub(4) (CZTS)/Mo thin film Schottky junction. Structural characterization was carried out using X-Ray diffraction and Raman Scattering whereas electrical characterization was performed by using the current-voltage (I-V) characteristics and by recording the AC impedance spectroscopy over a wide range of temperature up to 558 K in the frequency range 5 Hz-13 MHz. The complex impedance plots display one semicircle with equivalent circuit functions as typical parallel RC connected to a serial resistance. The characteristic parameters such as barrier height, ideality factor and series resistance have been calculated from the I-V measurements. At room temperature, this heterostructure has shown non-ideal Schottky behavior with an ideality factor of 1.56 and 0.829 mu A as a saturation current. By the impedance spectroscopy technique, we have found that all of the serial resistance R sub(s) and the parallel resistance Rp decrease by increasing temperature whereas the capacitance C sub(0) increased from 0.76 to 1.07 mu F. From the Arrhenius diagram, we estimated activation energy at 0.289 eV which represents the energy difference between the trap level and the valence band.</description><identifier>ISSN: 0957-4522</identifier><identifier>EISSN: 1573-482X</identifier><identifier>DOI: 10.1007/s10854-016-6189-3</identifier><language>eng</language><subject>Barriers ; Electrical properties ; Impedance spectroscopy ; Mathematical analysis ; Parameters ; Serials ; Thin films ; Volt-ampere characteristics</subject><ispartof>Journal of materials science. Materials in electronics, 2017-04, Vol.28 (7), p.5315-5322</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids></links><search><creatorcontrib>Touati, R</creatorcontrib><creatorcontrib>Trabelsi, I</creatorcontrib><creatorcontrib>Rabeh, MBen</creatorcontrib><creatorcontrib>Kanzari, M</creatorcontrib><title>Structural and electrical properties of the Al/p-Cu sub(2)ZnSnS sub(4) thin film schottky diode</title><title>Journal of materials science. Materials in electronics</title><description>In order to calculate the Schottky barrier parameters and to explain the resulting effects, the conduction mechanisms in a Schottky barrier should be known. In the present study, we investigated the structural and electrical properties of Al/p-Cu sub(2)ZnSnS sub(4) (CZTS)/Mo thin film Schottky junction. Structural characterization was carried out using X-Ray diffraction and Raman Scattering whereas electrical characterization was performed by using the current-voltage (I-V) characteristics and by recording the AC impedance spectroscopy over a wide range of temperature up to 558 K in the frequency range 5 Hz-13 MHz. The complex impedance plots display one semicircle with equivalent circuit functions as typical parallel RC connected to a serial resistance. The characteristic parameters such as barrier height, ideality factor and series resistance have been calculated from the I-V measurements. At room temperature, this heterostructure has shown non-ideal Schottky behavior with an ideality factor of 1.56 and 0.829 mu A as a saturation current. By the impedance spectroscopy technique, we have found that all of the serial resistance R sub(s) and the parallel resistance Rp decrease by increasing temperature whereas the capacitance C sub(0) increased from 0.76 to 1.07 mu F. From the Arrhenius diagram, we estimated activation energy at 0.289 eV which represents the energy difference between the trap level and the valence band.</description><subject>Barriers</subject><subject>Electrical properties</subject><subject>Impedance spectroscopy</subject><subject>Mathematical analysis</subject><subject>Parameters</subject><subject>Serials</subject><subject>Thin films</subject><subject>Volt-ampere characteristics</subject><issn>0957-4522</issn><issn>1573-482X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2017</creationdate><recordtype>article</recordtype><recordid>eNqVT71OwzAYtBCVCKUPwOaxHUzt2PkbUQViDwPqEgXni-rWtYM_e-DtsRAvwHR3utPpjpBHwZ8E580eBW8rxbioWS3ajskbUoiqkUy15cctKXhXNUxVZXlH7hHPnPNaybYgQx9D0jGF0dLRTRQs6BiMznIJfoEQDSD1M40noM92v7BDopg-t-Xu6HrX_3K1y7ZxdDb2SlGffIyXbzoZP8EDWc2jRdj84ZpsX1_eD28st38lwDhcDWqwdnTgEw55u-zyi6aT_4j-AEs-Tfc</recordid><startdate>20170401</startdate><enddate>20170401</enddate><creator>Touati, R</creator><creator>Trabelsi, I</creator><creator>Rabeh, MBen</creator><creator>Kanzari, M</creator><scope>7SP</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>F28</scope><scope>FR3</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20170401</creationdate><title>Structural and electrical properties of the Al/p-Cu sub(2)ZnSnS sub(4) thin film schottky diode</title><author>Touati, R ; Trabelsi, I ; Rabeh, MBen ; Kanzari, M</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_miscellaneous_18939016793</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2017</creationdate><topic>Barriers</topic><topic>Electrical properties</topic><topic>Impedance spectroscopy</topic><topic>Mathematical analysis</topic><topic>Parameters</topic><topic>Serials</topic><topic>Thin films</topic><topic>Volt-ampere characteristics</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Touati, R</creatorcontrib><creatorcontrib>Trabelsi, I</creatorcontrib><creatorcontrib>Rabeh, MBen</creatorcontrib><creatorcontrib>Kanzari, M</creatorcontrib><collection>Electronics & Communications Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>ANTE: Abstracts in New Technology & Engineering</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Journal of materials science. Materials in electronics</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Touati, R</au><au>Trabelsi, I</au><au>Rabeh, MBen</au><au>Kanzari, M</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Structural and electrical properties of the Al/p-Cu sub(2)ZnSnS sub(4) thin film schottky diode</atitle><jtitle>Journal of materials science. Materials in electronics</jtitle><date>2017-04-01</date><risdate>2017</risdate><volume>28</volume><issue>7</issue><spage>5315</spage><epage>5322</epage><pages>5315-5322</pages><issn>0957-4522</issn><eissn>1573-482X</eissn><abstract>In order to calculate the Schottky barrier parameters and to explain the resulting effects, the conduction mechanisms in a Schottky barrier should be known. In the present study, we investigated the structural and electrical properties of Al/p-Cu sub(2)ZnSnS sub(4) (CZTS)/Mo thin film Schottky junction. Structural characterization was carried out using X-Ray diffraction and Raman Scattering whereas electrical characterization was performed by using the current-voltage (I-V) characteristics and by recording the AC impedance spectroscopy over a wide range of temperature up to 558 K in the frequency range 5 Hz-13 MHz. The complex impedance plots display one semicircle with equivalent circuit functions as typical parallel RC connected to a serial resistance. The characteristic parameters such as barrier height, ideality factor and series resistance have been calculated from the I-V measurements. At room temperature, this heterostructure has shown non-ideal Schottky behavior with an ideality factor of 1.56 and 0.829 mu A as a saturation current. By the impedance spectroscopy technique, we have found that all of the serial resistance R sub(s) and the parallel resistance Rp decrease by increasing temperature whereas the capacitance C sub(0) increased from 0.76 to 1.07 mu F. From the Arrhenius diagram, we estimated activation energy at 0.289 eV which represents the energy difference between the trap level and the valence band.</abstract><doi>10.1007/s10854-016-6189-3</doi></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0957-4522 |
ispartof | Journal of materials science. Materials in electronics, 2017-04, Vol.28 (7), p.5315-5322 |
issn | 0957-4522 1573-482X |
language | eng |
recordid | cdi_proquest_miscellaneous_1893901679 |
source | SpringerNature Journals |
subjects | Barriers Electrical properties Impedance spectroscopy Mathematical analysis Parameters Serials Thin films Volt-ampere characteristics |
title | Structural and electrical properties of the Al/p-Cu sub(2)ZnSnS sub(4) thin film schottky diode |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-24T20%3A27%3A28IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Structural%20and%20electrical%20properties%20of%20the%20Al/p-Cu%20sub(2)ZnSnS%20sub(4)%20thin%20film%20schottky%20diode&rft.jtitle=Journal%20of%20materials%20science.%20Materials%20in%20electronics&rft.au=Touati,%20R&rft.date=2017-04-01&rft.volume=28&rft.issue=7&rft.spage=5315&rft.epage=5322&rft.pages=5315-5322&rft.issn=0957-4522&rft.eissn=1573-482X&rft_id=info:doi/10.1007/s10854-016-6189-3&rft_dat=%3Cproquest%3E1893901679%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1893901679&rft_id=info:pmid/&rfr_iscdi=true |