A filtration model applied to submerged anaerobic MBRs (SAnMBRs)
The aim of this study was to develop a model able to correctly reproduce the filtration process of submerged anaerobic MBRs (SAnMBRs). The proposed model was calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes. Three suspended components were...
Gespeichert in:
| Veröffentlicht in: | Journal of membrane science 2013-10, Vol.444, p.139-147 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 147 |
|---|---|
| container_issue | |
| container_start_page | 139 |
| container_title | Journal of membrane science |
| container_volume | 444 |
| creator | Robles, A. Ruano, M.V. Ribes, J. Seco, A. Ferrer, J. |
| description | The aim of this study was to develop a model able to correctly reproduce the filtration process of submerged anaerobic MBRs (SAnMBRs). The proposed model was calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes. Three suspended components were contemplated in the model: total solids concentration; dry mass of cake on the membrane surface; and dry mass of irreversible fouling on the membrane surface. The model addressed the following physical processes: the build-up and compression of the cake layer during filtration; cake layer removal using biogas sparging to scour the membrane; cake layer removal during back-flushing; and the consolidation of irreversible fouling. The short- and long-term validation of the model resulted in correlation coefficients (R2) of 0.962 and 0.929, respectively.
[Display omitted]
•A model for filtration in SAnMBRs has been developed.•This model (based on the resistance-in-series model) can easily be used with any biological model.•The model was calibrated and validated using industrial-scale hollow-fibre membranes.•Short- and long-term validation resulted in R2 of 0.962 and 0.929, respectively. |
| doi_str_mv | 10.1016/j.memsci.2013.05.021 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_1800433230</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0376738813004080</els_id><sourcerecordid>1751212648</sourcerecordid><originalsourceid>FETCH-LOGICAL-c485t-9252562cff86adb76d9cadd7ec8e64aaa7de7010282aae29c0c760718ccc0ad83</originalsourceid><addsrcrecordid>eNqFkE1r3DAQhkVpINtN_0EOvgQ2B7sjyba0l9BNSNtAQiBNzmJ2NC5a_LGVvIX--9hsyLE9zQw87zvwCHEuoZAg6y-7ouMuUSgUSF1AVYCSH8RCWqNzLZX-KBagTZ0bbe2p-JTSDkAasOuF-LrJmtCOEccw9Fk3eG4z3O_bwD4bhywdth3HX9OBPXIctoGyh-unlK1-bvp5uTwTJw22iT-_zaV4-Xb7fPMjv3_8fnezuc-ptNWYr1WlqlpR09ga_dbUfk3ovWGyXJeIaDwbkKCsQmS1JiBTg5GWiAC91UuxOvbu4_D7wGl0XUjEbYs9D4fkpAUotVYa_o-aSiqp6nJuLY8oxSGlyI3bx9Bh_OskuNmt27mjWze7dVC5ye0Uu3j7gImwbSL2FNJ7VpnKlFU5c1dHjiczfwJHNzVxT-xDZBqdH8K_H70CX2GPmQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1751212648</pqid></control><display><type>article</type><title>A filtration model applied to submerged anaerobic MBRs (SAnMBRs)</title><source>Access via ScienceDirect (Elsevier)</source><creator>Robles, A. ; Ruano, M.V. ; Ribes, J. ; Seco, A. ; Ferrer, J.</creator><creatorcontrib>Robles, A. ; Ruano, M.V. ; Ribes, J. ; Seco, A. ; Ferrer, J.</creatorcontrib><description>The aim of this study was to develop a model able to correctly reproduce the filtration process of submerged anaerobic MBRs (SAnMBRs). The proposed model was calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes. Three suspended components were contemplated in the model: total solids concentration; dry mass of cake on the membrane surface; and dry mass of irreversible fouling on the membrane surface. The model addressed the following physical processes: the build-up and compression of the cake layer during filtration; cake layer removal using biogas sparging to scour the membrane; cake layer removal during back-flushing; and the consolidation of irreversible fouling. The short- and long-term validation of the model resulted in correlation coefficients (R2) of 0.962 and 0.929, respectively.
[Display omitted]
•A model for filtration in SAnMBRs has been developed.•This model (based on the resistance-in-series model) can easily be used with any biological model.•The model was calibrated and validated using industrial-scale hollow-fibre membranes.•Short- and long-term validation resulted in R2 of 0.962 and 0.929, respectively.</description><identifier>ISSN: 0376-7388</identifier><identifier>EISSN: 1873-3123</identifier><identifier>DOI: 10.1016/j.memsci.2013.05.021</identifier><identifier>CODEN: JMESDO</identifier><language>eng</language><publisher>Amsterdam: Elsevier B.V</publisher><subject>Cakes ; Calibration ; Chemistry ; Colloidal state and disperse state ; Compressing ; Drying ; Exact sciences and technology ; Filtration ; Filtration model ; Fouling ; General and physical chemistry ; Industrial-scale hollow-fibre membranes ; Membranes ; Resistance-in-series-based ; Submerged ; Submerged anaerobic MBR</subject><ispartof>Journal of membrane science, 2013-10, Vol.444, p.139-147</ispartof><rights>2013 Elsevier B.V.</rights><rights>2014 INIST-CNRS</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c485t-9252562cff86adb76d9cadd7ec8e64aaa7de7010282aae29c0c760718ccc0ad83</citedby><cites>FETCH-LOGICAL-c485t-9252562cff86adb76d9cadd7ec8e64aaa7de7010282aae29c0c760718ccc0ad83</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.memsci.2013.05.021$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=27574541$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Robles, A.</creatorcontrib><creatorcontrib>Ruano, M.V.</creatorcontrib><creatorcontrib>Ribes, J.</creatorcontrib><creatorcontrib>Seco, A.</creatorcontrib><creatorcontrib>Ferrer, J.</creatorcontrib><title>A filtration model applied to submerged anaerobic MBRs (SAnMBRs)</title><title>Journal of membrane science</title><description>The aim of this study was to develop a model able to correctly reproduce the filtration process of submerged anaerobic MBRs (SAnMBRs). The proposed model was calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes. Three suspended components were contemplated in the model: total solids concentration; dry mass of cake on the membrane surface; and dry mass of irreversible fouling on the membrane surface. The model addressed the following physical processes: the build-up and compression of the cake layer during filtration; cake layer removal using biogas sparging to scour the membrane; cake layer removal during back-flushing; and the consolidation of irreversible fouling. The short- and long-term validation of the model resulted in correlation coefficients (R2) of 0.962 and 0.929, respectively.
[Display omitted]
•A model for filtration in SAnMBRs has been developed.•This model (based on the resistance-in-series model) can easily be used with any biological model.•The model was calibrated and validated using industrial-scale hollow-fibre membranes.•Short- and long-term validation resulted in R2 of 0.962 and 0.929, respectively.</description><subject>Cakes</subject><subject>Calibration</subject><subject>Chemistry</subject><subject>Colloidal state and disperse state</subject><subject>Compressing</subject><subject>Drying</subject><subject>Exact sciences and technology</subject><subject>Filtration</subject><subject>Filtration model</subject><subject>Fouling</subject><subject>General and physical chemistry</subject><subject>Industrial-scale hollow-fibre membranes</subject><subject>Membranes</subject><subject>Resistance-in-series-based</subject><subject>Submerged</subject><subject>Submerged anaerobic MBR</subject><issn>0376-7388</issn><issn>1873-3123</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2013</creationdate><recordtype>article</recordtype><recordid>eNqFkE1r3DAQhkVpINtN_0EOvgQ2B7sjyba0l9BNSNtAQiBNzmJ2NC5a_LGVvIX--9hsyLE9zQw87zvwCHEuoZAg6y-7ouMuUSgUSF1AVYCSH8RCWqNzLZX-KBagTZ0bbe2p-JTSDkAasOuF-LrJmtCOEccw9Fk3eG4z3O_bwD4bhywdth3HX9OBPXIctoGyh-unlK1-bvp5uTwTJw22iT-_zaV4-Xb7fPMjv3_8fnezuc-ptNWYr1WlqlpR09ga_dbUfk3ovWGyXJeIaDwbkKCsQmS1JiBTg5GWiAC91UuxOvbu4_D7wGl0XUjEbYs9D4fkpAUotVYa_o-aSiqp6nJuLY8oxSGlyI3bx9Bh_OskuNmt27mjWze7dVC5ye0Uu3j7gImwbSL2FNJ7VpnKlFU5c1dHjiczfwJHNzVxT-xDZBqdH8K_H70CX2GPmQ</recordid><startdate>20131001</startdate><enddate>20131001</enddate><creator>Robles, A.</creator><creator>Ruano, M.V.</creator><creator>Ribes, J.</creator><creator>Seco, A.</creator><creator>Ferrer, J.</creator><general>Elsevier B.V</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7QH</scope><scope>7UA</scope><scope>C1K</scope><scope>F1W</scope><scope>H97</scope><scope>L.G</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20131001</creationdate><title>A filtration model applied to submerged anaerobic MBRs (SAnMBRs)</title><author>Robles, A. ; Ruano, M.V. ; Ribes, J. ; Seco, A. ; Ferrer, J.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c485t-9252562cff86adb76d9cadd7ec8e64aaa7de7010282aae29c0c760718ccc0ad83</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2013</creationdate><topic>Cakes</topic><topic>Calibration</topic><topic>Chemistry</topic><topic>Colloidal state and disperse state</topic><topic>Compressing</topic><topic>Drying</topic><topic>Exact sciences and technology</topic><topic>Filtration</topic><topic>Filtration model</topic><topic>Fouling</topic><topic>General and physical chemistry</topic><topic>Industrial-scale hollow-fibre membranes</topic><topic>Membranes</topic><topic>Resistance-in-series-based</topic><topic>Submerged</topic><topic>Submerged anaerobic MBR</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Robles, A.</creatorcontrib><creatorcontrib>Ruano, M.V.</creatorcontrib><creatorcontrib>Ribes, J.</creatorcontrib><creatorcontrib>Seco, A.</creatorcontrib><creatorcontrib>Ferrer, J.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Aqualine</collection><collection>Water Resources Abstracts</collection><collection>Environmental Sciences and Pollution Management</collection><collection>ASFA: Aquatic Sciences and Fisheries Abstracts</collection><collection>Aquatic Science & Fisheries Abstracts (ASFA) 3: Aquatic Pollution & Environmental Quality</collection><collection>Aquatic Science & Fisheries Abstracts (ASFA) Professional</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Journal of membrane science</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Robles, A.</au><au>Ruano, M.V.</au><au>Ribes, J.</au><au>Seco, A.</au><au>Ferrer, J.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>A filtration model applied to submerged anaerobic MBRs (SAnMBRs)</atitle><jtitle>Journal of membrane science</jtitle><date>2013-10-01</date><risdate>2013</risdate><volume>444</volume><spage>139</spage><epage>147</epage><pages>139-147</pages><issn>0376-7388</issn><eissn>1873-3123</eissn><coden>JMESDO</coden><abstract>The aim of this study was to develop a model able to correctly reproduce the filtration process of submerged anaerobic MBRs (SAnMBRs). The proposed model was calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes. Three suspended components were contemplated in the model: total solids concentration; dry mass of cake on the membrane surface; and dry mass of irreversible fouling on the membrane surface. The model addressed the following physical processes: the build-up and compression of the cake layer during filtration; cake layer removal using biogas sparging to scour the membrane; cake layer removal during back-flushing; and the consolidation of irreversible fouling. The short- and long-term validation of the model resulted in correlation coefficients (R2) of 0.962 and 0.929, respectively.
[Display omitted]
•A model for filtration in SAnMBRs has been developed.•This model (based on the resistance-in-series model) can easily be used with any biological model.•The model was calibrated and validated using industrial-scale hollow-fibre membranes.•Short- and long-term validation resulted in R2 of 0.962 and 0.929, respectively.</abstract><cop>Amsterdam</cop><pub>Elsevier B.V</pub><doi>10.1016/j.memsci.2013.05.021</doi><tpages>9</tpages><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0376-7388 |
| ispartof | Journal of membrane science, 2013-10, Vol.444, p.139-147 |
| issn | 0376-7388 1873-3123 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_1800433230 |
| source | Access via ScienceDirect (Elsevier) |
| subjects | Cakes Calibration Chemistry Colloidal state and disperse state Compressing Drying Exact sciences and technology Filtration Filtration model Fouling General and physical chemistry Industrial-scale hollow-fibre membranes Membranes Resistance-in-series-based Submerged Submerged anaerobic MBR |
| title | A filtration model applied to submerged anaerobic MBRs (SAnMBRs) |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-04T05%3A58%3A49IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=A%20filtration%20model%20applied%20to%20submerged%20anaerobic%20MBRs%20(SAnMBRs)&rft.jtitle=Journal%20of%20membrane%20science&rft.au=Robles,%20A.&rft.date=2013-10-01&rft.volume=444&rft.spage=139&rft.epage=147&rft.pages=139-147&rft.issn=0376-7388&rft.eissn=1873-3123&rft.coden=JMESDO&rft_id=info:doi/10.1016/j.memsci.2013.05.021&rft_dat=%3Cproquest_cross%3E1751212648%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1751212648&rft_id=info:pmid/&rft_els_id=S0376738813004080&rfr_iscdi=true |