Product Evaluation for the Control of Chemical Emissions to Indoor Air - 10 Years of Experience with the AgBB Scheme in Germany

Emissions from construction products may have a significant impact on the quality of indoor air, particularly in energy‐efficient buildings, where the normal rate of air exchange with fresh ambient air may be limited. In this context, reduction strategies to mitigate the concentration of chemicals in the indoor environment have become even more important. German authorities wanted to foster the development of low‐emission products, and as a result it was necessary to quantify and qualify these emissions in a reliable and objective manner. The core principles for evaluation of the standardized measurements in emission tests were established by the “Committee for Health‐Related Evaluation of Building Products” (AgBB) and published in the so‐called “AgBB scheme”. Relevant for evaluation are: (i) Assessment of the emission levels of substances with known toxicological properties; (ii) limits for non‐assessable or unknown substances; (iii) limits for the total amount of chemical emissions. This review describes the stepwise implementation of the test procedure in Germany and the experience gained in evaluation of product emissions over the years. A comprehensive overview of the philosophy, history, current practices, and future directions of the German AgBB scheme for VOC emissions is also provided. Special emphasis is given to the evaluation of a list of about 170 single substances which have an agreed “lowest concentration of interest” (LCI) value for the indoor environment – values that are updated periodically according to present toxicological knowledge. This review describes the stepwise implementation of the test procedure in Germany and the experience gained in evaluation of product emissions over the years. A comprehensive overview of the philosophy, history, current practices, and future directions of the German AgBB scheme for VOC emissions is also provided.