Water quality index to determine the surface water quality of Sankey tank and Mallathahalli lake, Bangalore urban district, Karnataka, India

The present work aims at assessing the water quality index (WQI) in the surface water of Sankey tank and Mallathahalli lake situated in Bangalore Urban district by monitoring three sampling locations within Sankey tank (viz., A, B and C) and Mallathahalli lake (viz., Inlet, Centre and outlet) for a period of 3 months from March to May 2012. The surface water samples were subjected to comprehensive physico-chemical analysis involving major cations (Ca 2+ , Mg 2+ , Na + , K + , Fe 2+ ), anions (HCO 3 − , Cl − , SO 4 2− , NO 3 − , F − , PO 4 3− ) besides general parameters (pH, EC, TDS, alkalinity, total hardness, DO, BOD, COD, CO 2 , SiO 2 , colour, turbidity). For calculating the WQI, 14 parameters namely, pH, electrical conductivity, total dissolved solids, total hardness, alkalinity, calcium, magnesium, sodium, potassium, chloride, sulphate, nitrate, fluorides and iron were considered. SAR values indicated that both Sankey tank and Mallathahalli lake waters are excellent (S1) for irrigation, while electrical conductivity values classified these lake water, respectively under medium salinity (C2) and high (C3) salinity category. Correlation between SAR and electrical conductivity revealed that Sankey tank water is C2S1 (medium salinity-low sodium) type while Mallathahalli lake water is C3S1 (high salinity-low sodium) type. Sankey tank and Mallathahalli lake water were, respectively hard and very hard in nature. Further, it is apparent from WQI values that Sankey tank water belongs to good water class with WQI values ranging from 50.34 to 63.38. The Mallathahalli lake water with WQI value ranging from 111.69 to 137.09, fall under poor water category.