Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique
This report presents a study on the properties of porcelain foam substrate fabricated via the sponge replication technique. The sintered porcelain foam substrates were dip-coated with SiC-, Cr-, and Ni-based coating slurries, and sintered again at 900–1250°C. The XRD results of coated samples show e...
Gespeichert in:
| Veröffentlicht in: | Ceramics international 2015-03, Vol.41 (2), p.2940-2947 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 2947 |
|---|---|
| container_issue | 2 |
| container_start_page | 2940 |
| container_title | Ceramics international |
| container_volume | 41 |
| creator | Jamaludin, Abdul Rashid Kasim, Shah Rizal Ismail, Ahmad Kamal Abdullah, Mohd Zukifly Ahmad, Zainal Arifin |
| description | This report presents a study on the properties of porcelain foam substrate fabricated via the sponge replication technique. The sintered porcelain foam substrates were dip-coated with SiC-, Cr-, and Ni-based coating slurries, and sintered again at 900–1250°C. The XRD results of coated samples show existence of secondary phases (Cr2O3, Al3Cr7, NiO2, and NiAl2O4) due to sintering, mostly at higher temperatures. The porosity of the plain substrate was reduced significantly after dip-coating and proportionally decreased as the sintering temperature increased, therefore influencing the compressive strength value. Furthermore, the thermal conductivity of coated substrate sintered at 1250°C was obtained in the range of 0.0921–0.1358W/mK, when compared to the plain substrate at 0.0461W/mK. In general, a reduction in the number of pores, cracks and open cells was observed, with significant improvement in the compressive strength of the coated substrate. |
| doi_str_mv | 10.1016/j.ceramint.2014.10.123 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_1692326608</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0272884214016721</els_id><sourcerecordid>1692326608</sourcerecordid><originalsourceid>FETCH-LOGICAL-c382t-cd96ef74ccdc08d3569a52208491a2e764703944e5f1723a0c25a0767bd2c7be3</originalsourceid><addsrcrecordid>eNqFULFOwzAUtBBIlMIvII8MTXDsxE42UEQBqYIBmC3HfqGumjjYLoi_J2lhZjq909093SF0mZE0Ixm_3qQavOpsH1NKsjydeMqO0CwrBUtYVfBjNCNU0KQsc3qKzkLYkNFY5WSGzFI13moVreuxa_HgvIatsj1unepw2DUhehUhYO1GMPjLxjV-sfUCP9kFVr3Btce7YPt3HNeAjR2SSbm_Qa97-7GDc3TSqm2Ai1-co7fl3Wv9kKye7x_r21WiWUljok3FoRW51kaT0rCCV6qglJR5lSkKgueCsCrPoWgzQZkimhaKCC4aQ7VogM3R1SF38G58G6LsbBjrbFUPbhfk2JkyyjkpRyk_SLV3IXho5eBtp_y3zIicZpUb-TernGbd85SNxpuDEcYinxa8DNpCr8FYDzpK4-x_ET9JL4Qu</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1692326608</pqid></control><display><type>article</type><title>Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique</title><source>Elsevier ScienceDirect Journals Complete</source><creator>Jamaludin, Abdul Rashid ; Kasim, Shah Rizal ; Ismail, Ahmad Kamal ; Abdullah, Mohd Zukifly ; Ahmad, Zainal Arifin</creator><creatorcontrib>Jamaludin, Abdul Rashid ; Kasim, Shah Rizal ; Ismail, Ahmad Kamal ; Abdullah, Mohd Zukifly ; Ahmad, Zainal Arifin</creatorcontrib><description>This report presents a study on the properties of porcelain foam substrate fabricated via the sponge replication technique. The sintered porcelain foam substrates were dip-coated with SiC-, Cr-, and Ni-based coating slurries, and sintered again at 900–1250°C. The XRD results of coated samples show existence of secondary phases (Cr2O3, Al3Cr7, NiO2, and NiAl2O4) due to sintering, mostly at higher temperatures. The porosity of the plain substrate was reduced significantly after dip-coating and proportionally decreased as the sintering temperature increased, therefore influencing the compressive strength value. Furthermore, the thermal conductivity of coated substrate sintered at 1250°C was obtained in the range of 0.0921–0.1358W/mK, when compared to the plain substrate at 0.0461W/mK. In general, a reduction in the number of pores, cracks and open cells was observed, with significant improvement in the compressive strength of the coated substrate.</description><identifier>ISSN: 0272-8842</identifier><identifier>EISSN: 1873-3956</identifier><identifier>DOI: 10.1016/j.ceramint.2014.10.123</identifier><language>eng</language><publisher>Elsevier Ltd</publisher><subject>Chromium ; Coating ; Compressive strength ; Dip coatings ; Foams ; Fracture ; Nickel ; Porcelain ; Porosity ; Silicon carbide ; Sintering ; Thermal conductivity</subject><ispartof>Ceramics international, 2015-03, Vol.41 (2), p.2940-2947</ispartof><rights>2014 Elsevier Ltd and Techna Group S.r.l.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c382t-cd96ef74ccdc08d3569a52208491a2e764703944e5f1723a0c25a0767bd2c7be3</citedby><cites>FETCH-LOGICAL-c382t-cd96ef74ccdc08d3569a52208491a2e764703944e5f1723a0c25a0767bd2c7be3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.ceramint.2014.10.123$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids></links><search><creatorcontrib>Jamaludin, Abdul Rashid</creatorcontrib><creatorcontrib>Kasim, Shah Rizal</creatorcontrib><creatorcontrib>Ismail, Ahmad Kamal</creatorcontrib><creatorcontrib>Abdullah, Mohd Zukifly</creatorcontrib><creatorcontrib>Ahmad, Zainal Arifin</creatorcontrib><title>Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique</title><title>Ceramics international</title><description>This report presents a study on the properties of porcelain foam substrate fabricated via the sponge replication technique. The sintered porcelain foam substrates were dip-coated with SiC-, Cr-, and Ni-based coating slurries, and sintered again at 900–1250°C. The XRD results of coated samples show existence of secondary phases (Cr2O3, Al3Cr7, NiO2, and NiAl2O4) due to sintering, mostly at higher temperatures. The porosity of the plain substrate was reduced significantly after dip-coating and proportionally decreased as the sintering temperature increased, therefore influencing the compressive strength value. Furthermore, the thermal conductivity of coated substrate sintered at 1250°C was obtained in the range of 0.0921–0.1358W/mK, when compared to the plain substrate at 0.0461W/mK. In general, a reduction in the number of pores, cracks and open cells was observed, with significant improvement in the compressive strength of the coated substrate.</description><subject>Chromium</subject><subject>Coating</subject><subject>Compressive strength</subject><subject>Dip coatings</subject><subject>Foams</subject><subject>Fracture</subject><subject>Nickel</subject><subject>Porcelain</subject><subject>Porosity</subject><subject>Silicon carbide</subject><subject>Sintering</subject><subject>Thermal conductivity</subject><issn>0272-8842</issn><issn>1873-3956</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2015</creationdate><recordtype>article</recordtype><recordid>eNqFULFOwzAUtBBIlMIvII8MTXDsxE42UEQBqYIBmC3HfqGumjjYLoi_J2lhZjq909093SF0mZE0Ixm_3qQavOpsH1NKsjydeMqO0CwrBUtYVfBjNCNU0KQsc3qKzkLYkNFY5WSGzFI13moVreuxa_HgvIatsj1unepw2DUhehUhYO1GMPjLxjV-sfUCP9kFVr3Btce7YPt3HNeAjR2SSbm_Qa97-7GDc3TSqm2Ai1-co7fl3Wv9kKye7x_r21WiWUljok3FoRW51kaT0rCCV6qglJR5lSkKgueCsCrPoWgzQZkimhaKCC4aQ7VogM3R1SF38G58G6LsbBjrbFUPbhfk2JkyyjkpRyk_SLV3IXho5eBtp_y3zIicZpUb-TernGbd85SNxpuDEcYinxa8DNpCr8FYDzpK4-x_ET9JL4Qu</recordid><startdate>20150301</startdate><enddate>20150301</enddate><creator>Jamaludin, Abdul Rashid</creator><creator>Kasim, Shah Rizal</creator><creator>Ismail, Ahmad Kamal</creator><creator>Abdullah, Mohd Zukifly</creator><creator>Ahmad, Zainal Arifin</creator><general>Elsevier Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7QQ</scope><scope>7SR</scope><scope>7U5</scope><scope>8FD</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20150301</creationdate><title>Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique</title><author>Jamaludin, Abdul Rashid ; Kasim, Shah Rizal ; Ismail, Ahmad Kamal ; Abdullah, Mohd Zukifly ; Ahmad, Zainal Arifin</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c382t-cd96ef74ccdc08d3569a52208491a2e764703944e5f1723a0c25a0767bd2c7be3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2015</creationdate><topic>Chromium</topic><topic>Coating</topic><topic>Compressive strength</topic><topic>Dip coatings</topic><topic>Foams</topic><topic>Fracture</topic><topic>Nickel</topic><topic>Porcelain</topic><topic>Porosity</topic><topic>Silicon carbide</topic><topic>Sintering</topic><topic>Thermal conductivity</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Jamaludin, Abdul Rashid</creatorcontrib><creatorcontrib>Kasim, Shah Rizal</creatorcontrib><creatorcontrib>Ismail, Ahmad Kamal</creatorcontrib><creatorcontrib>Abdullah, Mohd Zukifly</creatorcontrib><creatorcontrib>Ahmad, Zainal Arifin</creatorcontrib><collection>CrossRef</collection><collection>Ceramic Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Ceramics international</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Jamaludin, Abdul Rashid</au><au>Kasim, Shah Rizal</au><au>Ismail, Ahmad Kamal</au><au>Abdullah, Mohd Zukifly</au><au>Ahmad, Zainal Arifin</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique</atitle><jtitle>Ceramics international</jtitle><date>2015-03-01</date><risdate>2015</risdate><volume>41</volume><issue>2</issue><spage>2940</spage><epage>2947</epage><pages>2940-2947</pages><issn>0272-8842</issn><eissn>1873-3956</eissn><abstract>This report presents a study on the properties of porcelain foam substrate fabricated via the sponge replication technique. The sintered porcelain foam substrates were dip-coated with SiC-, Cr-, and Ni-based coating slurries, and sintered again at 900–1250°C. The XRD results of coated samples show existence of secondary phases (Cr2O3, Al3Cr7, NiO2, and NiAl2O4) due to sintering, mostly at higher temperatures. The porosity of the plain substrate was reduced significantly after dip-coating and proportionally decreased as the sintering temperature increased, therefore influencing the compressive strength value. Furthermore, the thermal conductivity of coated substrate sintered at 1250°C was obtained in the range of 0.0921–0.1358W/mK, when compared to the plain substrate at 0.0461W/mK. In general, a reduction in the number of pores, cracks and open cells was observed, with significant improvement in the compressive strength of the coated substrate.</abstract><pub>Elsevier Ltd</pub><doi>10.1016/j.ceramint.2014.10.123</doi><tpages>8</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0272-8842 |
| ispartof | Ceramics international, 2015-03, Vol.41 (2), p.2940-2947 |
| issn | 0272-8842 1873-3956 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_1692326608 |
| source | Elsevier ScienceDirect Journals Complete |
| subjects | Chromium Coating Compressive strength Dip coatings Foams Fracture Nickel Porcelain Porosity Silicon carbide Sintering Thermal conductivity |
| title | Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-05T14%3A57%3A34IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Fabrication%20of%20porcelain%20foam%20substrates%20coated%20with%20SiC,%20Ni,%20and%20Cr%20using%20the%20dip-coating%20technique&rft.jtitle=Ceramics%20international&rft.au=Jamaludin,%20Abdul%20Rashid&rft.date=2015-03-01&rft.volume=41&rft.issue=2&rft.spage=2940&rft.epage=2947&rft.pages=2940-2947&rft.issn=0272-8842&rft.eissn=1873-3956&rft_id=info:doi/10.1016/j.ceramint.2014.10.123&rft_dat=%3Cproquest_cross%3E1692326608%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1692326608&rft_id=info:pmid/&rft_els_id=S0272884214016721&rfr_iscdi=true |