Influence of the Lead Angle from the Vertical Axis Milling on Effective Radius of the Cutter
The submission deals with the five-axis milling at finishing process by the nose ball milling cutter. The final quality of machined surfaces is depending on many technological parameters. One of these parameters is the effective radius of cutter too. The effective radius of cutter determinates the c...
Gespeichert in:
| Veröffentlicht in: | Key engineering materials 2013-10, Vol.581, p.44-49 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 49 |
|---|---|
| container_issue | |
| container_start_page | 44 |
| container_title | Key engineering materials |
| container_volume | 581 |
| creator | Pokorný, Peter Peterka, Jozef |
| description | The submission deals with the five-axis milling at finishing process by the nose ball milling cutter. The final quality of machined surfaces is depending on many technological parameters. One of these parameters is the effective radius of cutter too. The effective radius of cutter determinates the contact line if you like the contact surface between cutter and just machined surface. In the submission is described the effect of a lead angle from the vertical axis milling on the effective radius of cutter. At last it is remitted how the change of effective radius is reflected in practice. |
| doi_str_mv | 10.4028/www.scientific.net/KEM.581.44 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_1678014155</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1620062824</sourcerecordid><originalsourceid>FETCH-LOGICAL-c391t-2110753b6f79ba4b367c049f6d0ce73c3df964ab3f2b812f859a5e67397005283</originalsourceid><addsrcrecordid>eNqNkU1LJDEQhptFYdXd_5CLsJfuyXcnB5FhmFVxZEF0TwshnalopCetSXpH_73tjotXT1UUz_se6qmqY4IbjqmabbfbJrsAsQQfXBOhzC6XV41QpOH8S3VApKS1brXYm3ZMWK0VlV-rw5wfMGZEEXFQ_bmIvh8hOkCDR-Ue0ArsGs3jXQ_Ip2Hz7_YbUgnO9mj-HDK6Cn0f4h0aIlp6D66Ev4Cu7TqM-X_JYiwF0rdq39s-w_f3eVTd_lzeLM7r1a-zi8V8VTumSakpIbgVrJO-1Z3lHZOtw1x7ucYOWubY2mvJbcc87RShXgltBciW6RZjQRU7qn7seh_T8DRCLmYTsoO-txGGMRsiW4UJJ0J8AqUYS6oon9CTHerSkHMCbx5T2Nj0Ygg2bwLMJMB8CDCTADMJMJMAw9_yp7t8STbmAu7ePAxjitMnPtnwCpXglao</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1620062824</pqid></control><display><type>article</type><title>Influence of the Lead Angle from the Vertical Axis Milling on Effective Radius of the Cutter</title><source>Scientific.net Journals</source><creator>Pokorný, Peter ; Peterka, Jozef</creator><creatorcontrib>Pokorný, Peter ; Peterka, Jozef</creatorcontrib><description>The submission deals with the five-axis milling at finishing process by the nose ball milling cutter. The final quality of machined surfaces is depending on many technological parameters. One of these parameters is the effective radius of cutter too. The effective radius of cutter determinates the contact line if you like the contact surface between cutter and just machined surface. In the submission is described the effect of a lead angle from the vertical axis milling on the effective radius of cutter. At last it is remitted how the change of effective radius is reflected in practice.</description><identifier>ISSN: 1013-9826</identifier><identifier>ISSN: 1662-9795</identifier><identifier>EISSN: 1662-9795</identifier><identifier>DOI: 10.4028/www.scientific.net/KEM.581.44</identifier><language>eng</language><publisher>Trans Tech Publications Ltd</publisher><subject>Ball milling ; Contact ; Cutters ; Finishing ; Lead angle ; Milling (machining) ; Nose</subject><ispartof>Key engineering materials, 2013-10, Vol.581, p.44-49</ispartof><rights>2014 Trans Tech Publications Ltd</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c391t-2110753b6f79ba4b367c049f6d0ce73c3df964ab3f2b812f859a5e67397005283</citedby><cites>FETCH-LOGICAL-c391t-2110753b6f79ba4b367c049f6d0ce73c3df964ab3f2b812f859a5e67397005283</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Uhttps://www.scientific.net/Image/TitleCover/2656?width=600</thumbnail><link.rule.ids>314,776,780,27901,27902</link.rule.ids></links><search><creatorcontrib>Pokorný, Peter</creatorcontrib><creatorcontrib>Peterka, Jozef</creatorcontrib><title>Influence of the Lead Angle from the Vertical Axis Milling on Effective Radius of the Cutter</title><title>Key engineering materials</title><description>The submission deals with the five-axis milling at finishing process by the nose ball milling cutter. The final quality of machined surfaces is depending on many technological parameters. One of these parameters is the effective radius of cutter too. The effective radius of cutter determinates the contact line if you like the contact surface between cutter and just machined surface. In the submission is described the effect of a lead angle from the vertical axis milling on the effective radius of cutter. At last it is remitted how the change of effective radius is reflected in practice.</description><subject>Ball milling</subject><subject>Contact</subject><subject>Cutters</subject><subject>Finishing</subject><subject>Lead angle</subject><subject>Milling (machining)</subject><subject>Nose</subject><issn>1013-9826</issn><issn>1662-9795</issn><issn>1662-9795</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2013</creationdate><recordtype>article</recordtype><recordid>eNqNkU1LJDEQhptFYdXd_5CLsJfuyXcnB5FhmFVxZEF0TwshnalopCetSXpH_73tjotXT1UUz_se6qmqY4IbjqmabbfbJrsAsQQfXBOhzC6XV41QpOH8S3VApKS1brXYm3ZMWK0VlV-rw5wfMGZEEXFQ_bmIvh8hOkCDR-Ue0ArsGs3jXQ_Ip2Hz7_YbUgnO9mj-HDK6Cn0f4h0aIlp6D66Ev4Cu7TqM-X_JYiwF0rdq39s-w_f3eVTd_lzeLM7r1a-zi8V8VTumSakpIbgVrJO-1Z3lHZOtw1x7ucYOWubY2mvJbcc87RShXgltBciW6RZjQRU7qn7seh_T8DRCLmYTsoO-txGGMRsiW4UJJ0J8AqUYS6oon9CTHerSkHMCbx5T2Nj0Ygg2bwLMJMB8CDCTADMJMJMAw9_yp7t8STbmAu7ePAxjitMnPtnwCpXglao</recordid><startdate>20131001</startdate><enddate>20131001</enddate><creator>Pokorný, Peter</creator><creator>Peterka, Jozef</creator><general>Trans Tech Publications Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20131001</creationdate><title>Influence of the Lead Angle from the Vertical Axis Milling on Effective Radius of the Cutter</title><author>Pokorný, Peter ; Peterka, Jozef</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c391t-2110753b6f79ba4b367c049f6d0ce73c3df964ab3f2b812f859a5e67397005283</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2013</creationdate><topic>Ball milling</topic><topic>Contact</topic><topic>Cutters</topic><topic>Finishing</topic><topic>Lead angle</topic><topic>Milling (machining)</topic><topic>Nose</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Pokorný, Peter</creatorcontrib><creatorcontrib>Peterka, Jozef</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Key engineering materials</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Pokorný, Peter</au><au>Peterka, Jozef</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Influence of the Lead Angle from the Vertical Axis Milling on Effective Radius of the Cutter</atitle><jtitle>Key engineering materials</jtitle><date>2013-10-01</date><risdate>2013</risdate><volume>581</volume><spage>44</spage><epage>49</epage><pages>44-49</pages><issn>1013-9826</issn><issn>1662-9795</issn><eissn>1662-9795</eissn><abstract>The submission deals with the five-axis milling at finishing process by the nose ball milling cutter. The final quality of machined surfaces is depending on many technological parameters. One of these parameters is the effective radius of cutter too. The effective radius of cutter determinates the contact line if you like the contact surface between cutter and just machined surface. In the submission is described the effect of a lead angle from the vertical axis milling on the effective radius of cutter. At last it is remitted how the change of effective radius is reflected in practice.</abstract><pub>Trans Tech Publications Ltd</pub><doi>10.4028/www.scientific.net/KEM.581.44</doi><tpages>6</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1013-9826 |
| ispartof | Key engineering materials, 2013-10, Vol.581, p.44-49 |
| issn | 1013-9826 1662-9795 1662-9795 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_1678014155 |
| source | Scientific.net Journals |
| subjects | Ball milling Contact Cutters Finishing Lead angle Milling (machining) Nose |
| title | Influence of the Lead Angle from the Vertical Axis Milling on Effective Radius of the Cutter |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-10T19%3A40%3A48IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Influence%20of%20the%20Lead%20Angle%20from%20the%20Vertical%20Axis%20Milling%20on%20Effective%20Radius%20of%20the%20Cutter&rft.jtitle=Key%20engineering%20materials&rft.au=Pokorn%C3%BD,%20Peter&rft.date=2013-10-01&rft.volume=581&rft.spage=44&rft.epage=49&rft.pages=44-49&rft.issn=1013-9826&rft.eissn=1662-9795&rft_id=info:doi/10.4028/www.scientific.net/KEM.581.44&rft_dat=%3Cproquest_cross%3E1620062824%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1620062824&rft_id=info:pmid/&rfr_iscdi=true |