Investigation of surface roughness of aluminium solid mould investment castings
Solid investment moulds are used for precious or non-precious metals and alloys castings, the most common application areas are dental prosthesis and jewellery fabrications. Investment casting is known for high dimensional accuracy and smooth surface finish. Casting of ultra-thin sections and small...
Gespeichert in:
| Veröffentlicht in: | Russian journal of non-ferrous metals 2013-11, Vol.54 (6), p.480-483 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 483 |
|---|---|
| container_issue | 6 |
| container_start_page | 480 |
| container_title | Russian journal of non-ferrous metals |
| container_volume | 54 |
| creator | Guler, Kerem Altug |
| description | Solid investment moulds are used for precious or non-precious metals and alloys castings, the most common application areas are dental prosthesis and jewellery fabrications. Investment casting is known for high dimensional accuracy and smooth surface finish. Casting of ultra-thin sections and small complex parts require vacuum assisted or centrifugal filling. In this study, solid investment casting of aluminium has been tried and surface quality of the castings was investigated. Specially designed steppedwedge surface roughness specimens were produced with A413 aluminium alloy casting into gypsum bonded solid moulds. Casting operations were carried out in two ways; the first only with gravitational force and the second with vacuum assistance. Surface roughness of as cast specimens were measured, effects of section thickness, vacuum assistance and location of the pattern on the wax tree were determined. |
| doi_str_mv | 10.3103/S1067821213060060 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_1671425560</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1671425560</sourcerecordid><originalsourceid>FETCH-LOGICAL-c301t-afc61e291ab499c6497528290ba631fea20dd22d95b4c2ea619108c0895cb2f03</originalsourceid><addsrcrecordid>eNp1kE9LxDAQxYMouK5-AG8FL16qmbRJm6Ms_llY2IMK3kqapjVLm6xJI_jtTa0HUYSBGWZ-7zE8hM4BX2WAs-tHwKwoCRDIMMOxDtACeJanvMAvh3GO53S6H6MT73cYU8opX6Dt2rwrP-pOjNqaxLaJD64VUiXOhu7VKO-npejDoI0OQ-Jtr5tksKFvEv2lHZQZEymiien8KTpqRe_V2Xdfoue726fVQ7rZ3q9XN5tUZhjGVLSSgSIcRJ1zLlnOC0pKwnEtWAatEgQ3DSENp3UuiRIMOOBS4pJTWZMWZ0t0OfvunX0L8Ytq0F6qvhdG2eArYAXkhFI2oRe_0J0NzsTvKsiLPGZFCxopmCnprPdOtdXe6UG4jwpwNUVc_Yk4asis8ZE1nXI_nP8VfQL0Mn0w</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1474060575</pqid></control><display><type>article</type><title>Investigation of surface roughness of aluminium solid mould investment castings</title><source>SpringerLink Journals - AutoHoldings</source><creator>Guler, Kerem Altug</creator><creatorcontrib>Guler, Kerem Altug</creatorcontrib><description>Solid investment moulds are used for precious or non-precious metals and alloys castings, the most common application areas are dental prosthesis and jewellery fabrications. Investment casting is known for high dimensional accuracy and smooth surface finish. Casting of ultra-thin sections and small complex parts require vacuum assisted or centrifugal filling. In this study, solid investment casting of aluminium has been tried and surface quality of the castings was investigated. Specially designed steppedwedge surface roughness specimens were produced with A413 aluminium alloy casting into gypsum bonded solid moulds. Casting operations were carried out in two ways; the first only with gravitational force and the second with vacuum assistance. Surface roughness of as cast specimens were measured, effects of section thickness, vacuum assistance and location of the pattern on the wax tree were determined.</description><identifier>ISSN: 1067-8212</identifier><identifier>EISSN: 1934-970X</identifier><identifier>DOI: 10.3103/S1067821213060060</identifier><language>eng</language><publisher>Boston: Springer US</publisher><subject>Aluminium ; Aluminum ; Castings ; Chemistry and Materials Science ; Dental materials ; Foundry ; Investment casting ; Materials Science ; Metallic Materials ; Molds ; Nonferrous metals ; Surface roughness</subject><ispartof>Russian journal of non-ferrous metals, 2013-11, Vol.54 (6), p.480-483</ispartof><rights>Allerton Press, Inc. 2013</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c301t-afc61e291ab499c6497528290ba631fea20dd22d95b4c2ea619108c0895cb2f03</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://link.springer.com/content/pdf/10.3103/S1067821213060060$$EPDF$$P50$$Gspringer$$H</linktopdf><linktohtml>$$Uhttps://link.springer.com/10.3103/S1067821213060060$$EHTML$$P50$$Gspringer$$H</linktohtml><link.rule.ids>314,780,784,27924,27925,41488,42557,51319</link.rule.ids></links><search><creatorcontrib>Guler, Kerem Altug</creatorcontrib><title>Investigation of surface roughness of aluminium solid mould investment castings</title><title>Russian journal of non-ferrous metals</title><addtitle>Russ. J. Non-ferrous Metals</addtitle><description>Solid investment moulds are used for precious or non-precious metals and alloys castings, the most common application areas are dental prosthesis and jewellery fabrications. Investment casting is known for high dimensional accuracy and smooth surface finish. Casting of ultra-thin sections and small complex parts require vacuum assisted or centrifugal filling. In this study, solid investment casting of aluminium has been tried and surface quality of the castings was investigated. Specially designed steppedwedge surface roughness specimens were produced with A413 aluminium alloy casting into gypsum bonded solid moulds. Casting operations were carried out in two ways; the first only with gravitational force and the second with vacuum assistance. Surface roughness of as cast specimens were measured, effects of section thickness, vacuum assistance and location of the pattern on the wax tree were determined.</description><subject>Aluminium</subject><subject>Aluminum</subject><subject>Castings</subject><subject>Chemistry and Materials Science</subject><subject>Dental materials</subject><subject>Foundry</subject><subject>Investment casting</subject><subject>Materials Science</subject><subject>Metallic Materials</subject><subject>Molds</subject><subject>Nonferrous metals</subject><subject>Surface roughness</subject><issn>1067-8212</issn><issn>1934-970X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2013</creationdate><recordtype>article</recordtype><recordid>eNp1kE9LxDAQxYMouK5-AG8FL16qmbRJm6Ms_llY2IMK3kqapjVLm6xJI_jtTa0HUYSBGWZ-7zE8hM4BX2WAs-tHwKwoCRDIMMOxDtACeJanvMAvh3GO53S6H6MT73cYU8opX6Dt2rwrP-pOjNqaxLaJD64VUiXOhu7VKO-npejDoI0OQ-Jtr5tksKFvEv2lHZQZEymiien8KTpqRe_V2Xdfoue726fVQ7rZ3q9XN5tUZhjGVLSSgSIcRJ1zLlnOC0pKwnEtWAatEgQ3DSENp3UuiRIMOOBS4pJTWZMWZ0t0OfvunX0L8Ytq0F6qvhdG2eArYAXkhFI2oRe_0J0NzsTvKsiLPGZFCxopmCnprPdOtdXe6UG4jwpwNUVc_Yk4asis8ZE1nXI_nP8VfQL0Mn0w</recordid><startdate>20131101</startdate><enddate>20131101</enddate><creator>Guler, Kerem Altug</creator><general>Springer US</general><general>Springer Nature B.V</general><scope>AAYXX</scope><scope>CITATION</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope><scope>7QF</scope></search><sort><creationdate>20131101</creationdate><title>Investigation of surface roughness of aluminium solid mould investment castings</title><author>Guler, Kerem Altug</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c301t-afc61e291ab499c6497528290ba631fea20dd22d95b4c2ea619108c0895cb2f03</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2013</creationdate><topic>Aluminium</topic><topic>Aluminum</topic><topic>Castings</topic><topic>Chemistry and Materials Science</topic><topic>Dental materials</topic><topic>Foundry</topic><topic>Investment casting</topic><topic>Materials Science</topic><topic>Metallic Materials</topic><topic>Molds</topic><topic>Nonferrous metals</topic><topic>Surface roughness</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Guler, Kerem Altug</creatorcontrib><collection>CrossRef</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><collection>Aluminium Industry Abstracts</collection><jtitle>Russian journal of non-ferrous metals</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Guler, Kerem Altug</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Investigation of surface roughness of aluminium solid mould investment castings</atitle><jtitle>Russian journal of non-ferrous metals</jtitle><stitle>Russ. J. Non-ferrous Metals</stitle><date>2013-11-01</date><risdate>2013</risdate><volume>54</volume><issue>6</issue><spage>480</spage><epage>483</epage><pages>480-483</pages><issn>1067-8212</issn><eissn>1934-970X</eissn><abstract>Solid investment moulds are used for precious or non-precious metals and alloys castings, the most common application areas are dental prosthesis and jewellery fabrications. Investment casting is known for high dimensional accuracy and smooth surface finish. Casting of ultra-thin sections and small complex parts require vacuum assisted or centrifugal filling. In this study, solid investment casting of aluminium has been tried and surface quality of the castings was investigated. Specially designed steppedwedge surface roughness specimens were produced with A413 aluminium alloy casting into gypsum bonded solid moulds. Casting operations were carried out in two ways; the first only with gravitational force and the second with vacuum assistance. Surface roughness of as cast specimens were measured, effects of section thickness, vacuum assistance and location of the pattern on the wax tree were determined.</abstract><cop>Boston</cop><pub>Springer US</pub><doi>10.3103/S1067821213060060</doi><tpages>4</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1067-8212 |
| ispartof | Russian journal of non-ferrous metals, 2013-11, Vol.54 (6), p.480-483 |
| issn | 1067-8212 1934-970X |
| language | eng |
| recordid | cdi_proquest_miscellaneous_1671425560 |
| source | SpringerLink Journals - AutoHoldings |
| subjects | Aluminium Aluminum Castings Chemistry and Materials Science Dental materials Foundry Investment casting Materials Science Metallic Materials Molds Nonferrous metals Surface roughness |
| title | Investigation of surface roughness of aluminium solid mould investment castings |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-07T05%3A47%3A19IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Investigation%20of%20surface%20roughness%20of%20aluminium%20solid%20mould%20investment%20castings&rft.jtitle=Russian%20journal%20of%20non-ferrous%20metals&rft.au=Guler,%20Kerem%20Altug&rft.date=2013-11-01&rft.volume=54&rft.issue=6&rft.spage=480&rft.epage=483&rft.pages=480-483&rft.issn=1067-8212&rft.eissn=1934-970X&rft_id=info:doi/10.3103/S1067821213060060&rft_dat=%3Cproquest_cross%3E1671425560%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1474060575&rft_id=info:pmid/&rfr_iscdi=true |