Laser and GTAW torch processing of Fe-Cr-B coatings on steel: Part II - microstructure and hardness
A comparison has been made of the relationship between microstructure and microhardness developed by surface melting Nanosteel SHS 7170 Fe-Cr-B alloy powder onto a plain carbon steel surface. This powder was initially developed as a high velocity oxyfuel sprayed coating, giving a strength 10 times t...
Gespeichert in:
| Veröffentlicht in: | Materials science and technology 2015-02, Vol.31 (3), p.355-360 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 360 |
|---|---|
| container_issue | 3 |
| container_start_page | 355 |
| container_title | Materials science and technology |
| container_volume | 31 |
| creator | Idriss, A. N. Md Mridha, S. Baker, T. N. |
| description | A comparison has been made of the relationship between microstructure and microhardness developed by surface melting Nanosteel SHS 7170 Fe-Cr-B alloy powder onto a plain carbon steel surface. This powder was initially developed as a high velocity oxyfuel sprayed coating, giving a strength 10 times that of mild steel, and is particularly suitable for surface protection against wear and corrosion. In the present study, the alloy powder was injected into the laser melted surface, while a preplaced powder was melted using the gas tungsten arc welding (GTAW) technique. The laser track consisted of fine dendrites and needle-like microstructures, which produced a maximum hardness value of over 800 HV, while the GTAW track produced a mixture of equiaxed and columnar grain microstructures with a maximum hardness value of 670 HV. The lower hardness values are considered to be associated with dilution and grain size. |
| doi_str_mv | 10.1179/1743284714Y.0000000547 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_infor</sourceid><recordid>TN_cdi_proquest_miscellaneous_1651458914</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sage_id>10.1179_1743284714Y.0000000547</sage_id><sourcerecordid>1651458914</sourcerecordid><originalsourceid>FETCH-LOGICAL-c280t-3cc8af6085780b0505196f1929a536e934ef8157658a54e5ca7c7c9064d3b9b33</originalsourceid><addsrcrecordid>eNqFkM1KAzEUhYMoWKuvIAE3bqYmk39wU0tbhYKbirgKaZrUKdNJTaZI396UESxuejcX7v3O4XAAuMVogLFQD1hQUkoqMP0YoG4YFWegd3gUh8856KGSiwJJwi_BVUrrzHClVA88zkxyEZpmCafz4TtsQ7SfcBuDdSlVzQoGDyeuGMXiCdpg2nxKMDQwtc7V1-DCmzq5m9_dB2-T8Xz0XMxepy-j4aywpURtQayVxnMkmZBogRhiWHGPVakMI9wpQp2XmAnOpGHUMWuEFVYhTpdkoRaE9MF955tzfe1cavWmStbVtWlc2CWNOcOUSYVpRu_-oeuwi01OlylCVW4A40zxjrIxpBSd19tYbUzca4z0oVR9VKr-KzULSSdMZuWOrE-php2qanyIG_MdYr3UrdnXIfpoGlslTU54_ABCMYjK</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1634983611</pqid></control><display><type>article</type><title>Laser and GTAW torch processing of Fe-Cr-B coatings on steel: Part II - microstructure and hardness</title><source>SAGE Complete A-Z List</source><creator>Idriss, A. N. Md ; Mridha, S. ; Baker, T. N.</creator><creatorcontrib>Idriss, A. N. Md ; Mridha, S. ; Baker, T. N.</creatorcontrib><description>A comparison has been made of the relationship between microstructure and microhardness developed by surface melting Nanosteel SHS 7170 Fe-Cr-B alloy powder onto a plain carbon steel surface. This powder was initially developed as a high velocity oxyfuel sprayed coating, giving a strength 10 times that of mild steel, and is particularly suitable for surface protection against wear and corrosion. In the present study, the alloy powder was injected into the laser melted surface, while a preplaced powder was melted using the gas tungsten arc welding (GTAW) technique. The laser track consisted of fine dendrites and needle-like microstructures, which produced a maximum hardness value of over 800 HV, while the GTAW track produced a mixture of equiaxed and columnar grain microstructures with a maximum hardness value of 670 HV. The lower hardness values are considered to be associated with dilution and grain size.</description><identifier>ISSN: 0267-0836</identifier><identifier>EISSN: 1743-2847</identifier><identifier>DOI: 10.1179/1743284714Y.0000000547</identifier><identifier>CODEN: MSCTEP</identifier><language>eng</language><publisher>London, England: Taylor & Francis</publisher><subject>Alloy powders ; Carbon steels ; Coating ; Corrosion prevention ; Fe-Cr-B powder ; Gas tungsten arc welding ; GTAW torch ; Hardness ; Laser ; Laser beam welding ; Lasers ; Microstructure ; Powder metallurgy ; Protective coatings ; Steel ; Steels</subject><ispartof>Materials science and technology, 2015-02, Vol.31 (3), p.355-360</ispartof><rights>2015 Institute of Materials, Minerals and Mining 2015</rights><rights>2015 Institute of Materials, Minerals and Mining</rights><rights>(©) 2015 Institute of Materials, Minerals and Mining</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c280t-3cc8af6085780b0505196f1929a536e934ef8157658a54e5ca7c7c9064d3b9b33</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://journals.sagepub.com/doi/pdf/10.1179/1743284714Y.0000000547$$EPDF$$P50$$Gsage$$H</linktopdf><linktohtml>$$Uhttps://journals.sagepub.com/doi/10.1179/1743284714Y.0000000547$$EHTML$$P50$$Gsage$$H</linktohtml><link.rule.ids>314,776,780,21799,27903,27904,43600,43601</link.rule.ids></links><search><creatorcontrib>Idriss, A. N. Md</creatorcontrib><creatorcontrib>Mridha, S.</creatorcontrib><creatorcontrib>Baker, T. N.</creatorcontrib><title>Laser and GTAW torch processing of Fe-Cr-B coatings on steel: Part II - microstructure and hardness</title><title>Materials science and technology</title><description>A comparison has been made of the relationship between microstructure and microhardness developed by surface melting Nanosteel SHS 7170 Fe-Cr-B alloy powder onto a plain carbon steel surface. This powder was initially developed as a high velocity oxyfuel sprayed coating, giving a strength 10 times that of mild steel, and is particularly suitable for surface protection against wear and corrosion. In the present study, the alloy powder was injected into the laser melted surface, while a preplaced powder was melted using the gas tungsten arc welding (GTAW) technique. The laser track consisted of fine dendrites and needle-like microstructures, which produced a maximum hardness value of over 800 HV, while the GTAW track produced a mixture of equiaxed and columnar grain microstructures with a maximum hardness value of 670 HV. The lower hardness values are considered to be associated with dilution and grain size.</description><subject>Alloy powders</subject><subject>Carbon steels</subject><subject>Coating</subject><subject>Corrosion prevention</subject><subject>Fe-Cr-B powder</subject><subject>Gas tungsten arc welding</subject><subject>GTAW torch</subject><subject>Hardness</subject><subject>Laser</subject><subject>Laser beam welding</subject><subject>Lasers</subject><subject>Microstructure</subject><subject>Powder metallurgy</subject><subject>Protective coatings</subject><subject>Steel</subject><subject>Steels</subject><issn>0267-0836</issn><issn>1743-2847</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2015</creationdate><recordtype>article</recordtype><recordid>eNqFkM1KAzEUhYMoWKuvIAE3bqYmk39wU0tbhYKbirgKaZrUKdNJTaZI396UESxuejcX7v3O4XAAuMVogLFQD1hQUkoqMP0YoG4YFWegd3gUh8856KGSiwJJwi_BVUrrzHClVA88zkxyEZpmCafz4TtsQ7SfcBuDdSlVzQoGDyeuGMXiCdpg2nxKMDQwtc7V1-DCmzq5m9_dB2-T8Xz0XMxepy-j4aywpURtQayVxnMkmZBogRhiWHGPVakMI9wpQp2XmAnOpGHUMWuEFVYhTpdkoRaE9MF955tzfe1cavWmStbVtWlc2CWNOcOUSYVpRu_-oeuwi01OlylCVW4A40zxjrIxpBSd19tYbUzca4z0oVR9VKr-KzULSSdMZuWOrE-php2qanyIG_MdYr3UrdnXIfpoGlslTU54_ABCMYjK</recordid><startdate>201502</startdate><enddate>201502</enddate><creator>Idriss, A. N. Md</creator><creator>Mridha, S.</creator><creator>Baker, T. N.</creator><general>Taylor & Francis</general><general>SAGE Publications</general><general>Taylor & Francis Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>F28</scope><scope>FR3</scope><scope>JG9</scope><scope>7SE</scope><scope>7SP</scope><scope>7U5</scope><scope>L7M</scope></search><sort><creationdate>201502</creationdate><title>Laser and GTAW torch processing of Fe-Cr-B coatings on steel</title><author>Idriss, A. N. Md ; Mridha, S. ; Baker, T. N.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c280t-3cc8af6085780b0505196f1929a536e934ef8157658a54e5ca7c7c9064d3b9b33</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2015</creationdate><topic>Alloy powders</topic><topic>Carbon steels</topic><topic>Coating</topic><topic>Corrosion prevention</topic><topic>Fe-Cr-B powder</topic><topic>Gas tungsten arc welding</topic><topic>GTAW torch</topic><topic>Hardness</topic><topic>Laser</topic><topic>Laser beam welding</topic><topic>Lasers</topic><topic>Microstructure</topic><topic>Powder metallurgy</topic><topic>Protective coatings</topic><topic>Steel</topic><topic>Steels</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Idriss, A. N. Md</creatorcontrib><creatorcontrib>Mridha, S.</creatorcontrib><creatorcontrib>Baker, T. N.</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>ANTE: Abstracts in New Technology & Engineering</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Corrosion Abstracts</collection><collection>Electronics & Communications Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Materials science and technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Idriss, A. N. Md</au><au>Mridha, S.</au><au>Baker, T. N.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Laser and GTAW torch processing of Fe-Cr-B coatings on steel: Part II - microstructure and hardness</atitle><jtitle>Materials science and technology</jtitle><date>2015-02</date><risdate>2015</risdate><volume>31</volume><issue>3</issue><spage>355</spage><epage>360</epage><pages>355-360</pages><issn>0267-0836</issn><eissn>1743-2847</eissn><coden>MSCTEP</coden><abstract>A comparison has been made of the relationship between microstructure and microhardness developed by surface melting Nanosteel SHS 7170 Fe-Cr-B alloy powder onto a plain carbon steel surface. This powder was initially developed as a high velocity oxyfuel sprayed coating, giving a strength 10 times that of mild steel, and is particularly suitable for surface protection against wear and corrosion. In the present study, the alloy powder was injected into the laser melted surface, while a preplaced powder was melted using the gas tungsten arc welding (GTAW) technique. The laser track consisted of fine dendrites and needle-like microstructures, which produced a maximum hardness value of over 800 HV, while the GTAW track produced a mixture of equiaxed and columnar grain microstructures with a maximum hardness value of 670 HV. The lower hardness values are considered to be associated with dilution and grain size.</abstract><cop>London, England</cop><pub>Taylor & Francis</pub><doi>10.1179/1743284714Y.0000000547</doi><tpages>6</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0267-0836 |
| ispartof | Materials science and technology, 2015-02, Vol.31 (3), p.355-360 |
| issn | 0267-0836 1743-2847 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_1651458914 |
| source | SAGE Complete A-Z List |
| subjects | Alloy powders Carbon steels Coating Corrosion prevention Fe-Cr-B powder Gas tungsten arc welding GTAW torch Hardness Laser Laser beam welding Lasers Microstructure Powder metallurgy Protective coatings Steel Steels |
| title | Laser and GTAW torch processing of Fe-Cr-B coatings on steel: Part II - microstructure and hardness |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-26T00%3A54%3A46IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_infor&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Laser%20and%20GTAW%20torch%20processing%20of%20Fe-Cr-B%20coatings%20on%20steel:%20Part%20II%20-%20microstructure%20and%20hardness&rft.jtitle=Materials%20science%20and%20technology&rft.au=Idriss,%20A.%20N.%20Md&rft.date=2015-02&rft.volume=31&rft.issue=3&rft.spage=355&rft.epage=360&rft.pages=355-360&rft.issn=0267-0836&rft.eissn=1743-2847&rft.coden=MSCTEP&rft_id=info:doi/10.1179/1743284714Y.0000000547&rft_dat=%3Cproquest_infor%3E1651458914%3C/proquest_infor%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1634983611&rft_id=info:pmid/&rft_sage_id=10.1179_1743284714Y.0000000547&rfr_iscdi=true |