Mechanical Behavior of Dissimilar Welds for Steam Turbine Rotors With High Application Temperature

Fossil fired steam power plants of the latest generation require the elevation of steam parameters pressure and temperature to increase efficiency as well as to reduce greenhouse gas emissions. In order to achieve these goals for high temperatures, nickel-base alloys could play an important role for...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of engineering for gas turbines and power 2015-03, Vol.137 (3)
Hauptverfasser: Krojer, Stefan, Roos, Eberhard, Klenk, Andreas, Sheng, Shilun, Kern, Torsten-Ulf
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue 3
container_start_page
container_title Journal of engineering for gas turbines and power
container_volume 137
creator Krojer, Stefan
Roos, Eberhard
Klenk, Andreas
Sheng, Shilun
Kern, Torsten-Ulf
description Fossil fired steam power plants of the latest generation require the elevation of steam parameters pressure and temperature to increase efficiency as well as to reduce greenhouse gas emissions. In order to achieve these goals for high temperatures, nickel-base alloys could play an important role for steam turbine applications in the future. Due to technological and economical restrictions, their application in turbine rotors shall be restricted to the most heavily stressed regions. Dissimilar welds offer a known solution to combine nickel-base alloys with ferritic/martensitic steels in this case. Thermal mismatch and differences in high temperature performance of the applied base materials make it very difficult to evaluate the lifetime of such dissimilar welds. Depending on temperature and type of loading, different failure mechanisms can be observed. Further, the type of weld material plays a major role for the service behavior of the weld. Therefore, this paper describes standard creep and fatigue tests which were conducted to identify failure mechanisms and failure locations at the weld zone. To simulate the outcome of the creep tests, a modified Graham-Walles approach is used that also accounts for the different creep behavior of the heat affected zones (HAZs) compared to the base material. For the simulation of the fatigue tests, the model type Chaboche–Nouailhas–Ohno–Wang (CNOW) is used. The results contribute to better knowledge in designing dissimilar welds between nickel-base alloys and martensitic steels under high temperature loading.
doi_str_mv 10.1115/1.4028435
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_1651430682</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1651430682</sourcerecordid><originalsourceid>FETCH-LOGICAL-a323t-3ccd3bafdb48f1269a7f10b92b86472d8aef7c79b67a56d65a504669cd6418573</originalsourceid><addsrcrecordid>eNotkM1LwzAAxYMoOKcHz15y1ENn0nz2OD8nTASd7BjSNLEZbVOTVvC_t7KdHjx-_OA9AC4xWmCM2S1eUJRLStgRmGGWy0wWuDgGMyRonlFRsFNwltIOIUwIFTNQvlpT684b3cA7W-sfHyIMDj74lHzrGx3h1jZVgm7qPwarW7gZY-k7C9_DEGKCWz_UcOW_arjs-2YSDT50cGPb3kY9jNGegxOnm2QvDjkHn0-Pm_tVtn57frlfrjNNcjJkxJiKlNpVJZUO57zQwmFUFnkpORV5JbV1woii5EIzXnGmGaKcF6biFEsmyBxc7719DN-jTYNqfTK2aXRnw5gU5gxTgrjMJ_Rmj5oYUorWqT76VsdfhZH6_1FhdfhxYq_2rE6tVbswxm5aoYiYXAX5AwGJbgo</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1651430682</pqid></control><display><type>article</type><title>Mechanical Behavior of Dissimilar Welds for Steam Turbine Rotors With High Application Temperature</title><source>ASME Transactions Journals (Current)</source><source>Alma/SFX Local Collection</source><creator>Krojer, Stefan ; Roos, Eberhard ; Klenk, Andreas ; Sheng, Shilun ; Kern, Torsten-Ulf</creator><creatorcontrib>Krojer, Stefan ; Roos, Eberhard ; Klenk, Andreas ; Sheng, Shilun ; Kern, Torsten-Ulf</creatorcontrib><description>Fossil fired steam power plants of the latest generation require the elevation of steam parameters pressure and temperature to increase efficiency as well as to reduce greenhouse gas emissions. In order to achieve these goals for high temperatures, nickel-base alloys could play an important role for steam turbine applications in the future. Due to technological and economical restrictions, their application in turbine rotors shall be restricted to the most heavily stressed regions. Dissimilar welds offer a known solution to combine nickel-base alloys with ferritic/martensitic steels in this case. Thermal mismatch and differences in high temperature performance of the applied base materials make it very difficult to evaluate the lifetime of such dissimilar welds. Depending on temperature and type of loading, different failure mechanisms can be observed. Further, the type of weld material plays a major role for the service behavior of the weld. Therefore, this paper describes standard creep and fatigue tests which were conducted to identify failure mechanisms and failure locations at the weld zone. To simulate the outcome of the creep tests, a modified Graham-Walles approach is used that also accounts for the different creep behavior of the heat affected zones (HAZs) compared to the base material. For the simulation of the fatigue tests, the model type Chaboche–Nouailhas–Ohno–Wang (CNOW) is used. The results contribute to better knowledge in designing dissimilar welds between nickel-base alloys and martensitic steels under high temperature loading.</description><identifier>ISSN: 0742-4795</identifier><identifier>EISSN: 1528-8919</identifier><identifier>DOI: 10.1115/1.4028435</identifier><language>eng</language><publisher>ASME</publisher><subject>Alloys ; Computer simulation ; Creep (materials) ; Gas Turbines: Structures and Dynamics ; Heat affected zone ; Nickel base alloys ; Steam electric power generation ; Steam turbines ; Welded joints</subject><ispartof>Journal of engineering for gas turbines and power, 2015-03, Vol.137 (3)</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-a323t-3ccd3bafdb48f1269a7f10b92b86472d8aef7c79b67a56d65a504669cd6418573</citedby><cites>FETCH-LOGICAL-a323t-3ccd3bafdb48f1269a7f10b92b86472d8aef7c79b67a56d65a504669cd6418573</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925,38520</link.rule.ids></links><search><creatorcontrib>Krojer, Stefan</creatorcontrib><creatorcontrib>Roos, Eberhard</creatorcontrib><creatorcontrib>Klenk, Andreas</creatorcontrib><creatorcontrib>Sheng, Shilun</creatorcontrib><creatorcontrib>Kern, Torsten-Ulf</creatorcontrib><title>Mechanical Behavior of Dissimilar Welds for Steam Turbine Rotors With High Application Temperature</title><title>Journal of engineering for gas turbines and power</title><addtitle>J. Eng. Gas Turbines Power</addtitle><description>Fossil fired steam power plants of the latest generation require the elevation of steam parameters pressure and temperature to increase efficiency as well as to reduce greenhouse gas emissions. In order to achieve these goals for high temperatures, nickel-base alloys could play an important role for steam turbine applications in the future. Due to technological and economical restrictions, their application in turbine rotors shall be restricted to the most heavily stressed regions. Dissimilar welds offer a known solution to combine nickel-base alloys with ferritic/martensitic steels in this case. Thermal mismatch and differences in high temperature performance of the applied base materials make it very difficult to evaluate the lifetime of such dissimilar welds. Depending on temperature and type of loading, different failure mechanisms can be observed. Further, the type of weld material plays a major role for the service behavior of the weld. Therefore, this paper describes standard creep and fatigue tests which were conducted to identify failure mechanisms and failure locations at the weld zone. To simulate the outcome of the creep tests, a modified Graham-Walles approach is used that also accounts for the different creep behavior of the heat affected zones (HAZs) compared to the base material. For the simulation of the fatigue tests, the model type Chaboche–Nouailhas–Ohno–Wang (CNOW) is used. The results contribute to better knowledge in designing dissimilar welds between nickel-base alloys and martensitic steels under high temperature loading.</description><subject>Alloys</subject><subject>Computer simulation</subject><subject>Creep (materials)</subject><subject>Gas Turbines: Structures and Dynamics</subject><subject>Heat affected zone</subject><subject>Nickel base alloys</subject><subject>Steam electric power generation</subject><subject>Steam turbines</subject><subject>Welded joints</subject><issn>0742-4795</issn><issn>1528-8919</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2015</creationdate><recordtype>article</recordtype><recordid>eNotkM1LwzAAxYMoOKcHz15y1ENn0nz2OD8nTASd7BjSNLEZbVOTVvC_t7KdHjx-_OA9AC4xWmCM2S1eUJRLStgRmGGWy0wWuDgGMyRonlFRsFNwltIOIUwIFTNQvlpT684b3cA7W-sfHyIMDj74lHzrGx3h1jZVgm7qPwarW7gZY-k7C9_DEGKCWz_UcOW_arjs-2YSDT50cGPb3kY9jNGegxOnm2QvDjkHn0-Pm_tVtn57frlfrjNNcjJkxJiKlNpVJZUO57zQwmFUFnkpORV5JbV1woii5EIzXnGmGaKcF6biFEsmyBxc7719DN-jTYNqfTK2aXRnw5gU5gxTgrjMJ_Rmj5oYUorWqT76VsdfhZH6_1FhdfhxYq_2rE6tVbswxm5aoYiYXAX5AwGJbgo</recordid><startdate>20150301</startdate><enddate>20150301</enddate><creator>Krojer, Stefan</creator><creator>Roos, Eberhard</creator><creator>Klenk, Andreas</creator><creator>Sheng, Shilun</creator><creator>Kern, Torsten-Ulf</creator><general>ASME</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SU</scope><scope>7TB</scope><scope>8BQ</scope><scope>8FD</scope><scope>C1K</scope><scope>F28</scope><scope>FR3</scope><scope>H8D</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20150301</creationdate><title>Mechanical Behavior of Dissimilar Welds for Steam Turbine Rotors With High Application Temperature</title><author>Krojer, Stefan ; Roos, Eberhard ; Klenk, Andreas ; Sheng, Shilun ; Kern, Torsten-Ulf</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-a323t-3ccd3bafdb48f1269a7f10b92b86472d8aef7c79b67a56d65a504669cd6418573</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2015</creationdate><topic>Alloys</topic><topic>Computer simulation</topic><topic>Creep (materials)</topic><topic>Gas Turbines: Structures and Dynamics</topic><topic>Heat affected zone</topic><topic>Nickel base alloys</topic><topic>Steam electric power generation</topic><topic>Steam turbines</topic><topic>Welded joints</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Krojer, Stefan</creatorcontrib><creatorcontrib>Roos, Eberhard</creatorcontrib><creatorcontrib>Klenk, Andreas</creatorcontrib><creatorcontrib>Sheng, Shilun</creatorcontrib><creatorcontrib>Kern, Torsten-Ulf</creatorcontrib><collection>CrossRef</collection><collection>Environmental Engineering Abstracts</collection><collection>Mechanical &amp; Transportation Engineering Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Environmental Sciences and Pollution Management</collection><collection>ANTE: Abstracts in New Technology &amp; Engineering</collection><collection>Engineering Research Database</collection><collection>Aerospace Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Journal of engineering for gas turbines and power</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Krojer, Stefan</au><au>Roos, Eberhard</au><au>Klenk, Andreas</au><au>Sheng, Shilun</au><au>Kern, Torsten-Ulf</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Mechanical Behavior of Dissimilar Welds for Steam Turbine Rotors With High Application Temperature</atitle><jtitle>Journal of engineering for gas turbines and power</jtitle><stitle>J. Eng. Gas Turbines Power</stitle><date>2015-03-01</date><risdate>2015</risdate><volume>137</volume><issue>3</issue><issn>0742-4795</issn><eissn>1528-8919</eissn><abstract>Fossil fired steam power plants of the latest generation require the elevation of steam parameters pressure and temperature to increase efficiency as well as to reduce greenhouse gas emissions. In order to achieve these goals for high temperatures, nickel-base alloys could play an important role for steam turbine applications in the future. Due to technological and economical restrictions, their application in turbine rotors shall be restricted to the most heavily stressed regions. Dissimilar welds offer a known solution to combine nickel-base alloys with ferritic/martensitic steels in this case. Thermal mismatch and differences in high temperature performance of the applied base materials make it very difficult to evaluate the lifetime of such dissimilar welds. Depending on temperature and type of loading, different failure mechanisms can be observed. Further, the type of weld material plays a major role for the service behavior of the weld. Therefore, this paper describes standard creep and fatigue tests which were conducted to identify failure mechanisms and failure locations at the weld zone. To simulate the outcome of the creep tests, a modified Graham-Walles approach is used that also accounts for the different creep behavior of the heat affected zones (HAZs) compared to the base material. For the simulation of the fatigue tests, the model type Chaboche–Nouailhas–Ohno–Wang (CNOW) is used. The results contribute to better knowledge in designing dissimilar welds between nickel-base alloys and martensitic steels under high temperature loading.</abstract><pub>ASME</pub><doi>10.1115/1.4028435</doi></addata></record>
fulltext fulltext
identifier ISSN: 0742-4795
ispartof Journal of engineering for gas turbines and power, 2015-03, Vol.137 (3)
issn 0742-4795
1528-8919
language eng
recordid cdi_proquest_miscellaneous_1651430682
source ASME Transactions Journals (Current); Alma/SFX Local Collection
subjects Alloys
Computer simulation
Creep (materials)
Gas Turbines: Structures and Dynamics
Heat affected zone
Nickel base alloys
Steam electric power generation
Steam turbines
Welded joints
title Mechanical Behavior of Dissimilar Welds for Steam Turbine Rotors With High Application Temperature
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-05T07%3A38%3A07IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Mechanical%20Behavior%20of%20Dissimilar%20Welds%20for%20Steam%20Turbine%20Rotors%20With%20High%20Application%20Temperature&rft.jtitle=Journal%20of%20engineering%20for%20gas%20turbines%20and%20power&rft.au=Krojer,%20Stefan&rft.date=2015-03-01&rft.volume=137&rft.issue=3&rft.issn=0742-4795&rft.eissn=1528-8919&rft_id=info:doi/10.1115/1.4028435&rft_dat=%3Cproquest_cross%3E1651430682%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1651430682&rft_id=info:pmid/&rfr_iscdi=true