Investigation into Oxygen-Enriched Bottom-Blown Stibnite and Direct Reduction

The direct oxidation of stibnite (Sb 2 S 3 ) using a gas mixture of nitrogen-oxygen was investigated in a pilot plant. Steady-state pilot operation of 5 and 10 t/d was normally observed during the pilot test of 100 days, and a cleaning experiment of high-antimony molten slag from oxygen-enriched bot...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Metallurgical and materials transactions. B, Process metallurgy and materials processing science Process metallurgy and materials processing science, 2014-08, Vol.45 (4), p.1281-1290
Hauptverfasser: Liu, Wei, Luo, Honglin, Qing, Wenqing, Zheng, Yongxing, Yang, Kang, Han, Junwei
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The direct oxidation of stibnite (Sb 2 S 3 ) using a gas mixture of nitrogen-oxygen was investigated in a pilot plant. Steady-state pilot operation of 5 and 10 t/d was normally observed during the pilot test of 100 days, and a cleaning experiment of high-antimony molten slag from oxygen-enriched bottom-blown was tested by direct reduction in a laboratory-scale electric furnace. Autogenous smelting was achieved without adding any other fuel, which guaranteed the feasibility and advantage of oxygen-enriched bottom-blown stibnite. Through analysis and calculation, the sulfur dioxide concentration in offgas was more than 8 pct, which meets the requirement for the preparation of sulfuric acid. In the reduction experiment, the effects of added CaO, the ratio of coal ( ω  = actual weight of coal/theoretical weight of coal), and the slag type on the reduction procedure were considered. The residual slag obtained after reduction averaged less than 1 g/ton Au and less than 1 wt pct Sb. The metal phase contained iron less than 3 wt pct, and the recoveries of Au in the metal phase were more than 98 pct. This process shows significant environmental and economic benefits compared with previous processes.
ISSN:1073-5615
1543-1916
DOI:10.1007/s11663-014-0055-6