Cryogelation of individual and complex nanooxides under different conditions

To study changes in the characteristics of gelled/dried nanooxides (fumed silicas PS300 and PS100, alumina, silica/titania ST, alumina/silica/titania AST), high-pressure cryogelation, HPCG (at 208K or 260K) or gelation (293K, 1atm) was carried out using 20wt.% aqueous suspensions pure or with addition of 0.1M NaCl. The nanooxide samples were studied after drying at room temperature. Maximal changes in the textural and crystalline characteristics are observed for cryogels with AST prepared at ∼1000atm and 208K due to decomposition of complex nanoparticles. Its specific surface area SBET increases from 83 to 160m2/g, and the crystallinity degree grows by 11%. Mixing of PS300 and AST (1:1, w/w) in the suspension prevents the decomposition of AST particles in the cryogel since SBET decreases in comparison with that of the initial blend powders. Addition of NaCl (2.8wt.% in dried powders) reduces decomposition of AST particles due to changes in HPCG conditions. For binary ST, SBET increases but much smaller than for AST. HPCG of individual silica and alumina leads to a decrease in the SBET value; i.e. nanoparticles are not decomposed. A significant increase in the volume of large mesopores (pore radius 5–10nm