Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application
Three series of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures for hybrid hydrogen storage vessel application were prepared by induction levitation melting, as well as their crystallographic characteristics and hydrogen storage properties were investigated. The results show...
Gespeichert in:
| Veröffentlicht in: | International journal of hydrogen energy 2013-09, Vol.38 (29), p.12803-12810 |
|---|---|
| Hauptverfasser: | , , , , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 12810 |
|---|---|
| container_issue | 29 |
| container_start_page | 12803 |
| container_title | International journal of hydrogen energy |
| container_volume | 38 |
| creator | Chen, Zhiwen Xiao, Xuezhang Chen, Lixin Fan, Xiulin Liu, Langxia Li, Shouquan Ge, Hongwei Wang, Qidong |
| description | Three series of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures for hybrid hydrogen storage vessel application were prepared by induction levitation melting, as well as their crystallographic characteristics and hydrogen storage properties were investigated. The results show that all of the alloys were determined as a single phase of C14-type Laves structure. As the Fe content in the TiCr1.9−xMn0.1Fex (x = 0.4–0.6) alloys increases, the hydrogen absorption and desorption plateau pressures increase, and the hydrogen storage capacity and plateau slope factor decrease respectively. The same trends are observed when increasing the Mn content in the TiCr1.4−yMnyFe0.6 (y = 0.1–0.3) alloys, except for the plateau slope factor. Compared with the stoichiometric TiCr1.1Mn0.3Fe0.6 alloy, the titanium super-stoichiometric Ti1+zCr1.1Mn0.3Fe0.6 (z = 0.02, 0.04) alloys have larger hydrogen storage capacities and lower hydrogen desorption plateau pressures. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 has the best overall properties for hybrid hydrogen storage application. Its hydrogen desorption pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy (ΔHd) is 16.24 kJ/mol H2.
Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures have been developed for hybrid hydrogen storage vessel application. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall performance for hybrid hydrogen storage. Its hydrogen desorption plateau pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy is 16.24 kJ/mol H2. [Display omitted]
•Ti–Cr–Mn–Fe based alloys have been developed for hybrid hydrogen storage application.•Partial substitution of Cr with Fe or Mn improves the hydrogen desorption pressure.•Ti super-stoichiometry in Ti–Cr–Mn–Fe alloys improves the hydrogen storage capacity.•Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall properties for hybrid hydrogen storage. |
| doi_str_mv | 10.1016/j.ijhydene.2013.07.073 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_1506395195</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S036031991301820X</els_id><sourcerecordid>1506395195</sourcerecordid><originalsourceid>FETCH-LOGICAL-c375t-b15e35a5154103bc8c9d6de515f35f1ff9602f0c4b55919545d1410c31e496cb3</originalsourceid><addsrcrecordid>eNqFkMFqGzEQhkVJoE7SVyi6FHJZR7JWu9YtwWnaQkov6VlopZEtI682mrWLb730CfoCfZY-Sp8kMk5yLQz_MPD9M8xPyHvOppzx5mo9DevV3kEP0xnjYsraUuINmfB5qypRz9sTMmGiYZXgSr0lZ4hrxnjLajUhv25hBzENG-hHmjx9CP9-_l7kIl_7IndAO4PgqIkx7ZH-COOKrsKyyN7ltIT-7x8HmPIwhtTTIQPitgj1KReky8G9khTHlM0S6K5AEKkZhhisORgvyKk3EeHdcz8n3-8-Piw-V_ffPn1Z3NxXVrRyrDouQUgjuaw5E52dW-UaB2X2QnruvWrYzDNbd1IqrmQtHS-kFRxq1dhOnJPL494hp8ct4Kg3AS3EaHpIW9RcskYoWawFbY6ozQkxg9dDDhuT95ozfchdr_VL7vqQu2ZtKVGMH55vGLQm-mx6G_DVPWtbOZPywF0fOSgP7wJkjTZAb8GFDHbULoX_nXoCf-2imA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1506395195</pqid></control><display><type>article</type><title>Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application</title><source>Access via ScienceDirect (Elsevier)</source><creator>Chen, Zhiwen ; Xiao, Xuezhang ; Chen, Lixin ; Fan, Xiulin ; Liu, Langxia ; Li, Shouquan ; Ge, Hongwei ; Wang, Qidong</creator><creatorcontrib>Chen, Zhiwen ; Xiao, Xuezhang ; Chen, Lixin ; Fan, Xiulin ; Liu, Langxia ; Li, Shouquan ; Ge, Hongwei ; Wang, Qidong</creatorcontrib><description>Three series of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures for hybrid hydrogen storage vessel application were prepared by induction levitation melting, as well as their crystallographic characteristics and hydrogen storage properties were investigated. The results show that all of the alloys were determined as a single phase of C14-type Laves structure. As the Fe content in the TiCr1.9−xMn0.1Fex (x = 0.4–0.6) alloys increases, the hydrogen absorption and desorption plateau pressures increase, and the hydrogen storage capacity and plateau slope factor decrease respectively. The same trends are observed when increasing the Mn content in the TiCr1.4−yMnyFe0.6 (y = 0.1–0.3) alloys, except for the plateau slope factor. Compared with the stoichiometric TiCr1.1Mn0.3Fe0.6 alloy, the titanium super-stoichiometric Ti1+zCr1.1Mn0.3Fe0.6 (z = 0.02, 0.04) alloys have larger hydrogen storage capacities and lower hydrogen desorption plateau pressures. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 has the best overall properties for hybrid hydrogen storage application. Its hydrogen desorption pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy (ΔHd) is 16.24 kJ/mol H2.
Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures have been developed for hybrid hydrogen storage vessel application. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall performance for hybrid hydrogen storage. Its hydrogen desorption plateau pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy is 16.24 kJ/mol H2. [Display omitted]
•Ti–Cr–Mn–Fe based alloys have been developed for hybrid hydrogen storage application.•Partial substitution of Cr with Fe or Mn improves the hydrogen desorption pressure.•Ti super-stoichiometry in Ti–Cr–Mn–Fe alloys improves the hydrogen storage capacity.•Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall properties for hybrid hydrogen storage.</description><identifier>ISSN: 0360-3199</identifier><identifier>EISSN: 1879-3487</identifier><identifier>DOI: 10.1016/j.ijhydene.2013.07.073</identifier><identifier>CODEN: IJHEDX</identifier><language>eng</language><publisher>Kidlington: Elsevier Ltd</publisher><subject>Alloys ; Alternative fuels. Production and utilization ; Applied sciences ; Desorption ; Energy ; Exact sciences and technology ; Fuels ; High hydrogen desorption pressure ; Hydrogen ; Hydrogen storage ; Hydrogen storage properties ; Hydrogen-based energy ; Iron ; Laves phase ; Manganese ; Metal hydrides ; Titanium base alloys ; Ti–Cr–Mn–Fe based alloys ; Vessels</subject><ispartof>International journal of hydrogen energy, 2013-09, Vol.38 (29), p.12803-12810</ispartof><rights>2013 Hydrogen Energy Publications, LLC.</rights><rights>2014 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c375t-b15e35a5154103bc8c9d6de515f35f1ff9602f0c4b55919545d1410c31e496cb3</citedby><cites>FETCH-LOGICAL-c375t-b15e35a5154103bc8c9d6de515f35f1ff9602f0c4b55919545d1410c31e496cb3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.ijhydene.2013.07.073$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=27752553$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Chen, Zhiwen</creatorcontrib><creatorcontrib>Xiao, Xuezhang</creatorcontrib><creatorcontrib>Chen, Lixin</creatorcontrib><creatorcontrib>Fan, Xiulin</creatorcontrib><creatorcontrib>Liu, Langxia</creatorcontrib><creatorcontrib>Li, Shouquan</creatorcontrib><creatorcontrib>Ge, Hongwei</creatorcontrib><creatorcontrib>Wang, Qidong</creatorcontrib><title>Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application</title><title>International journal of hydrogen energy</title><description>Three series of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures for hybrid hydrogen storage vessel application were prepared by induction levitation melting, as well as their crystallographic characteristics and hydrogen storage properties were investigated. The results show that all of the alloys were determined as a single phase of C14-type Laves structure. As the Fe content in the TiCr1.9−xMn0.1Fex (x = 0.4–0.6) alloys increases, the hydrogen absorption and desorption plateau pressures increase, and the hydrogen storage capacity and plateau slope factor decrease respectively. The same trends are observed when increasing the Mn content in the TiCr1.4−yMnyFe0.6 (y = 0.1–0.3) alloys, except for the plateau slope factor. Compared with the stoichiometric TiCr1.1Mn0.3Fe0.6 alloy, the titanium super-stoichiometric Ti1+zCr1.1Mn0.3Fe0.6 (z = 0.02, 0.04) alloys have larger hydrogen storage capacities and lower hydrogen desorption plateau pressures. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 has the best overall properties for hybrid hydrogen storage application. Its hydrogen desorption pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy (ΔHd) is 16.24 kJ/mol H2.
Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures have been developed for hybrid hydrogen storage vessel application. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall performance for hybrid hydrogen storage. Its hydrogen desorption plateau pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy is 16.24 kJ/mol H2. [Display omitted]
•Ti–Cr–Mn–Fe based alloys have been developed for hybrid hydrogen storage application.•Partial substitution of Cr with Fe or Mn improves the hydrogen desorption pressure.•Ti super-stoichiometry in Ti–Cr–Mn–Fe alloys improves the hydrogen storage capacity.•Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall properties for hybrid hydrogen storage.</description><subject>Alloys</subject><subject>Alternative fuels. Production and utilization</subject><subject>Applied sciences</subject><subject>Desorption</subject><subject>Energy</subject><subject>Exact sciences and technology</subject><subject>Fuels</subject><subject>High hydrogen desorption pressure</subject><subject>Hydrogen</subject><subject>Hydrogen storage</subject><subject>Hydrogen storage properties</subject><subject>Hydrogen-based energy</subject><subject>Iron</subject><subject>Laves phase</subject><subject>Manganese</subject><subject>Metal hydrides</subject><subject>Titanium base alloys</subject><subject>Ti–Cr–Mn–Fe based alloys</subject><subject>Vessels</subject><issn>0360-3199</issn><issn>1879-3487</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2013</creationdate><recordtype>article</recordtype><recordid>eNqFkMFqGzEQhkVJoE7SVyi6FHJZR7JWu9YtwWnaQkov6VlopZEtI682mrWLb730CfoCfZY-Sp8kMk5yLQz_MPD9M8xPyHvOppzx5mo9DevV3kEP0xnjYsraUuINmfB5qypRz9sTMmGiYZXgSr0lZ4hrxnjLajUhv25hBzENG-hHmjx9CP9-_l7kIl_7IndAO4PgqIkx7ZH-COOKrsKyyN7ltIT-7x8HmPIwhtTTIQPitgj1KReky8G9khTHlM0S6K5AEKkZhhisORgvyKk3EeHdcz8n3-8-Piw-V_ffPn1Z3NxXVrRyrDouQUgjuaw5E52dW-UaB2X2QnruvWrYzDNbd1IqrmQtHS-kFRxq1dhOnJPL494hp8ct4Kg3AS3EaHpIW9RcskYoWawFbY6ozQkxg9dDDhuT95ozfchdr_VL7vqQu2ZtKVGMH55vGLQm-mx6G_DVPWtbOZPywF0fOSgP7wJkjTZAb8GFDHbULoX_nXoCf-2imA</recordid><startdate>20130930</startdate><enddate>20130930</enddate><creator>Chen, Zhiwen</creator><creator>Xiao, Xuezhang</creator><creator>Chen, Lixin</creator><creator>Fan, Xiulin</creator><creator>Liu, Langxia</creator><creator>Li, Shouquan</creator><creator>Ge, Hongwei</creator><creator>Wang, Qidong</creator><general>Elsevier Ltd</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SP</scope><scope>7SU</scope><scope>7TB</scope><scope>8BQ</scope><scope>8FD</scope><scope>C1K</scope><scope>FR3</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20130930</creationdate><title>Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application</title><author>Chen, Zhiwen ; Xiao, Xuezhang ; Chen, Lixin ; Fan, Xiulin ; Liu, Langxia ; Li, Shouquan ; Ge, Hongwei ; Wang, Qidong</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c375t-b15e35a5154103bc8c9d6de515f35f1ff9602f0c4b55919545d1410c31e496cb3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2013</creationdate><topic>Alloys</topic><topic>Alternative fuels. Production and utilization</topic><topic>Applied sciences</topic><topic>Desorption</topic><topic>Energy</topic><topic>Exact sciences and technology</topic><topic>Fuels</topic><topic>High hydrogen desorption pressure</topic><topic>Hydrogen</topic><topic>Hydrogen storage</topic><topic>Hydrogen storage properties</topic><topic>Hydrogen-based energy</topic><topic>Iron</topic><topic>Laves phase</topic><topic>Manganese</topic><topic>Metal hydrides</topic><topic>Titanium base alloys</topic><topic>Ti–Cr–Mn–Fe based alloys</topic><topic>Vessels</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Chen, Zhiwen</creatorcontrib><creatorcontrib>Xiao, Xuezhang</creatorcontrib><creatorcontrib>Chen, Lixin</creatorcontrib><creatorcontrib>Fan, Xiulin</creatorcontrib><creatorcontrib>Liu, Langxia</creatorcontrib><creatorcontrib>Li, Shouquan</creatorcontrib><creatorcontrib>Ge, Hongwei</creatorcontrib><creatorcontrib>Wang, Qidong</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Electronics & Communications Abstracts</collection><collection>Environmental Engineering Abstracts</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Environmental Sciences and Pollution Management</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>International journal of hydrogen energy</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Chen, Zhiwen</au><au>Xiao, Xuezhang</au><au>Chen, Lixin</au><au>Fan, Xiulin</au><au>Liu, Langxia</au><au>Li, Shouquan</au><au>Ge, Hongwei</au><au>Wang, Qidong</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application</atitle><jtitle>International journal of hydrogen energy</jtitle><date>2013-09-30</date><risdate>2013</risdate><volume>38</volume><issue>29</issue><spage>12803</spage><epage>12810</epage><pages>12803-12810</pages><issn>0360-3199</issn><eissn>1879-3487</eissn><coden>IJHEDX</coden><abstract>Three series of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures for hybrid hydrogen storage vessel application were prepared by induction levitation melting, as well as their crystallographic characteristics and hydrogen storage properties were investigated. The results show that all of the alloys were determined as a single phase of C14-type Laves structure. As the Fe content in the TiCr1.9−xMn0.1Fex (x = 0.4–0.6) alloys increases, the hydrogen absorption and desorption plateau pressures increase, and the hydrogen storage capacity and plateau slope factor decrease respectively. The same trends are observed when increasing the Mn content in the TiCr1.4−yMnyFe0.6 (y = 0.1–0.3) alloys, except for the plateau slope factor. Compared with the stoichiometric TiCr1.1Mn0.3Fe0.6 alloy, the titanium super-stoichiometric Ti1+zCr1.1Mn0.3Fe0.6 (z = 0.02, 0.04) alloys have larger hydrogen storage capacities and lower hydrogen desorption plateau pressures. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 has the best overall properties for hybrid hydrogen storage application. Its hydrogen desorption pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy (ΔHd) is 16.24 kJ/mol H2.
Ti–Cr–Mn–Fe based alloys with high hydrogen desorption plateau pressures have been developed for hybrid hydrogen storage vessel application. Among the studied alloys, Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall performance for hybrid hydrogen storage. Its hydrogen desorption plateau pressure at 318 K is 41.28 MPa, its hydrogen storage capacity is 1.78 wt.% and its dissociation enthalpy is 16.24 kJ/mol H2. [Display omitted]
•Ti–Cr–Mn–Fe based alloys have been developed for hybrid hydrogen storage application.•Partial substitution of Cr with Fe or Mn improves the hydrogen desorption pressure.•Ti super-stoichiometry in Ti–Cr–Mn–Fe alloys improves the hydrogen storage capacity.•Ti1.02Cr1.1Mn0.3Fe0.6 shows the best overall properties for hybrid hydrogen storage.</abstract><cop>Kidlington</cop><pub>Elsevier Ltd</pub><doi>10.1016/j.ijhydene.2013.07.073</doi><tpages>8</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0360-3199 |
| ispartof | International journal of hydrogen energy, 2013-09, Vol.38 (29), p.12803-12810 |
| issn | 0360-3199 1879-3487 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_1506395195 |
| source | Access via ScienceDirect (Elsevier) |
| subjects | Alloys Alternative fuels. Production and utilization Applied sciences Desorption Energy Exact sciences and technology Fuels High hydrogen desorption pressure Hydrogen Hydrogen storage Hydrogen storage properties Hydrogen-based energy Iron Laves phase Manganese Metal hydrides Titanium base alloys Ti–Cr–Mn–Fe based alloys Vessels |
| title | Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-24T17%3A08%3A51IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Development%20of%20Ti%E2%80%93Cr%E2%80%93Mn%E2%80%93Fe%20based%20alloys%20with%20high%20hydrogen%C2%A0desorption%20pressures%20for%20hybrid%20hydrogen%20storage%20vessel%20application&rft.jtitle=International%20journal%20of%20hydrogen%20energy&rft.au=Chen,%20Zhiwen&rft.date=2013-09-30&rft.volume=38&rft.issue=29&rft.spage=12803&rft.epage=12810&rft.pages=12803-12810&rft.issn=0360-3199&rft.eissn=1879-3487&rft.coden=IJHEDX&rft_id=info:doi/10.1016/j.ijhydene.2013.07.073&rft_dat=%3Cproquest_cross%3E1506395195%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1506395195&rft_id=info:pmid/&rft_els_id=S036031991301820X&rfr_iscdi=true |