MODIFICATION OF POLYAMIDE 6 WITH HALLOYSITE NANOTUBES
The effect of halloysite nanotubes (HNT) (Fig. 1) on the structure as well as thermal and mechanical properties of the composites based on polyamide-6 (PA 6/HNT) has been studied. The content of HNT in the composites was 2, 4 or 6 weight percent. The composites were prepared by double extrusion usin...
Gespeichert in:
Veröffentlicht in: | Polimery 2013-01, Vol.58 (1), p.18-23 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | pol |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 23 |
---|---|
container_issue | 1 |
container_start_page | 18 |
container_title | Polimery |
container_volume | 58 |
creator | Kelar, K Olejniczak, J Mencel, K |
description | The effect of halloysite nanotubes (HNT) (Fig. 1) on the structure as well as thermal and mechanical properties of the composites based on polyamide-6 (PA 6/HNT) has been studied. The content of HNT in the composites was 2, 4 or 6 weight percent. The composites were prepared by double extrusion using a single-screw extruder. The degree of dispersion of HNT in polyamide matrix was analyzed by mapping the distribution of silicon atoms in the composites. The melt flow rate (MFR, Table 1), actual content of HNT in the composites (Table 1), strength properties in a static tensile test as well as the structure by differential scanning calorimetry (DSC, Fig. 3, Fig. 4, Table 2) and dynamic mechanical thermal analysis (DMTA, Fig. 5, Fig. 6, Table 3) were examined. It was found that the degree of HNT dispersion in the polymer matrix depended on their weight content and that the presence of HNT affected the process of PA 6 crystallization in the composites (Fig. 2, Table 2). It was indicated that the double extrusion resulted in a partial degradation of PA 6 macromolecules (Table 1).Original Abstract: Zbadano wplyw haloizytowych nanorurek (HNT) na strukture, wlasciwosci cieplne i mechaniczne kompozytow na bazie poliamidu 6 (PA 6/HNT). Zawartosc HNT w kompozytach wynosila 2, 4 lub 6 % mas. Kompozyty otrzymano na drodze dwukrotnego wytlaczania przy uzyciu wytlaczarki jednoslimakowej. Stopien zdyspergowania HNT w poliamidowej matrycy analizowano na podstawie map rozkladu atomow krzemu w kompozytach. Oznaczano: wskaznik szybkosci plyniecia (MFR), rzeczywista zawartosc HNT w kompozytach, cechy wytrzymalosciowe w probie statycznego rozciagania, strukture -- metoda skaningowej kalorymetrii roznicowej (DSC) i dynamicznej analizy termomechanicznej (DMTA). Stwierdzono, ze stopien zdyspergowania HNT w matrycy polimerowej zalezy od ich masowego udzialu oraz, ze nanorurki haloizytowe wplywaja na proces krystalizacji PA 6 w kompozytach. Wykazano, ze dwukrotne wytlaczanie powoduie czesciowa degradacje makroczasteczek PA 6. |
format | Article |
fullrecord | <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_miscellaneous_1315704208</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1315704208</sourcerecordid><originalsourceid>FETCH-proquest_miscellaneous_13157042083</originalsourceid><addsrcrecordid>eNpjYeA0MDA20jUyNzLlYOAqLs4yMDAzMTCw4GQw9fV38XTzdHYM8fT3U_B3Uwjw94l09PV0cVUwUwj3DPFQ8HD08fGPDPYMcVXwc_TzDwl1cg3mYWBNS8wpTuWF0twMGm6uIc4eugVF-YWlqcUl8bmZxcmpOTmJean5pcXxhsaGpuYGJkYGFsYkKAUAuHIy-w</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1315704208</pqid></control><display><type>article</type><title>MODIFICATION OF POLYAMIDE 6 WITH HALLOYSITE NANOTUBES</title><source>EZB-FREE-00999 freely available EZB journals</source><creator>Kelar, K ; Olejniczak, J ; Mencel, K</creator><creatorcontrib>Kelar, K ; Olejniczak, J ; Mencel, K</creatorcontrib><description>The effect of halloysite nanotubes (HNT) (Fig. 1) on the structure as well as thermal and mechanical properties of the composites based on polyamide-6 (PA 6/HNT) has been studied. The content of HNT in the composites was 2, 4 or 6 weight percent. The composites were prepared by double extrusion using a single-screw extruder. The degree of dispersion of HNT in polyamide matrix was analyzed by mapping the distribution of silicon atoms in the composites. The melt flow rate (MFR, Table 1), actual content of HNT in the composites (Table 1), strength properties in a static tensile test as well as the structure by differential scanning calorimetry (DSC, Fig. 3, Fig. 4, Table 2) and dynamic mechanical thermal analysis (DMTA, Fig. 5, Fig. 6, Table 3) were examined. It was found that the degree of HNT dispersion in the polymer matrix depended on their weight content and that the presence of HNT affected the process of PA 6 crystallization in the composites (Fig. 2, Table 2). It was indicated that the double extrusion resulted in a partial degradation of PA 6 macromolecules (Table 1).Original Abstract: Zbadano wplyw haloizytowych nanorurek (HNT) na strukture, wlasciwosci cieplne i mechaniczne kompozytow na bazie poliamidu 6 (PA 6/HNT). Zawartosc HNT w kompozytach wynosila 2, 4 lub 6 % mas. Kompozyty otrzymano na drodze dwukrotnego wytlaczania przy uzyciu wytlaczarki jednoslimakowej. Stopien zdyspergowania HNT w poliamidowej matrycy analizowano na podstawie map rozkladu atomow krzemu w kompozytach. Oznaczano: wskaznik szybkosci plyniecia (MFR), rzeczywista zawartosc HNT w kompozytach, cechy wytrzymalosciowe w probie statycznego rozciagania, strukture -- metoda skaningowej kalorymetrii roznicowej (DSC) i dynamicznej analizy termomechanicznej (DMTA). Stwierdzono, ze stopien zdyspergowania HNT w matrycy polimerowej zalezy od ich masowego udzialu oraz, ze nanorurki haloizytowe wplywaja na proces krystalizacji PA 6 w kompozytach. Wykazano, ze dwukrotne wytlaczanie powoduie czesciowa degradacje makroczasteczek PA 6.</description><identifier>ISSN: 0032-2725</identifier><language>pol</language><subject>Differential scanning calorimetry ; Dispersions ; Extrusion ; Macromolecules ; Nanotubes ; Polyamide resins ; Polymer matrix composites ; Tables (data)</subject><ispartof>Polimery, 2013-01, Vol.58 (1), p.18-23</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784</link.rule.ids></links><search><creatorcontrib>Kelar, K</creatorcontrib><creatorcontrib>Olejniczak, J</creatorcontrib><creatorcontrib>Mencel, K</creatorcontrib><title>MODIFICATION OF POLYAMIDE 6 WITH HALLOYSITE NANOTUBES</title><title>Polimery</title><description>The effect of halloysite nanotubes (HNT) (Fig. 1) on the structure as well as thermal and mechanical properties of the composites based on polyamide-6 (PA 6/HNT) has been studied. The content of HNT in the composites was 2, 4 or 6 weight percent. The composites were prepared by double extrusion using a single-screw extruder. The degree of dispersion of HNT in polyamide matrix was analyzed by mapping the distribution of silicon atoms in the composites. The melt flow rate (MFR, Table 1), actual content of HNT in the composites (Table 1), strength properties in a static tensile test as well as the structure by differential scanning calorimetry (DSC, Fig. 3, Fig. 4, Table 2) and dynamic mechanical thermal analysis (DMTA, Fig. 5, Fig. 6, Table 3) were examined. It was found that the degree of HNT dispersion in the polymer matrix depended on their weight content and that the presence of HNT affected the process of PA 6 crystallization in the composites (Fig. 2, Table 2). It was indicated that the double extrusion resulted in a partial degradation of PA 6 macromolecules (Table 1).Original Abstract: Zbadano wplyw haloizytowych nanorurek (HNT) na strukture, wlasciwosci cieplne i mechaniczne kompozytow na bazie poliamidu 6 (PA 6/HNT). Zawartosc HNT w kompozytach wynosila 2, 4 lub 6 % mas. Kompozyty otrzymano na drodze dwukrotnego wytlaczania przy uzyciu wytlaczarki jednoslimakowej. Stopien zdyspergowania HNT w poliamidowej matrycy analizowano na podstawie map rozkladu atomow krzemu w kompozytach. Oznaczano: wskaznik szybkosci plyniecia (MFR), rzeczywista zawartosc HNT w kompozytach, cechy wytrzymalosciowe w probie statycznego rozciagania, strukture -- metoda skaningowej kalorymetrii roznicowej (DSC) i dynamicznej analizy termomechanicznej (DMTA). Stwierdzono, ze stopien zdyspergowania HNT w matrycy polimerowej zalezy od ich masowego udzialu oraz, ze nanorurki haloizytowe wplywaja na proces krystalizacji PA 6 w kompozytach. Wykazano, ze dwukrotne wytlaczanie powoduie czesciowa degradacje makroczasteczek PA 6.</description><subject>Differential scanning calorimetry</subject><subject>Dispersions</subject><subject>Extrusion</subject><subject>Macromolecules</subject><subject>Nanotubes</subject><subject>Polyamide resins</subject><subject>Polymer matrix composites</subject><subject>Tables (data)</subject><issn>0032-2725</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2013</creationdate><recordtype>article</recordtype><recordid>eNpjYeA0MDA20jUyNzLlYOAqLs4yMDAzMTCw4GQw9fV38XTzdHYM8fT3U_B3Uwjw94l09PV0cVUwUwj3DPFQ8HD08fGPDPYMcVXwc_TzDwl1cg3mYWBNS8wpTuWF0twMGm6uIc4eugVF-YWlqcUl8bmZxcmpOTmJean5pcXxhsaGpuYGJkYGFsYkKAUAuHIy-w</recordid><startdate>20130101</startdate><enddate>20130101</enddate><creator>Kelar, K</creator><creator>Olejniczak, J</creator><creator>Mencel, K</creator><scope>7SR</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20130101</creationdate><title>MODIFICATION OF POLYAMIDE 6 WITH HALLOYSITE NANOTUBES</title><author>Kelar, K ; Olejniczak, J ; Mencel, K</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_miscellaneous_13157042083</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>pol</language><creationdate>2013</creationdate><topic>Differential scanning calorimetry</topic><topic>Dispersions</topic><topic>Extrusion</topic><topic>Macromolecules</topic><topic>Nanotubes</topic><topic>Polyamide resins</topic><topic>Polymer matrix composites</topic><topic>Tables (data)</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Kelar, K</creatorcontrib><creatorcontrib>Olejniczak, J</creatorcontrib><creatorcontrib>Mencel, K</creatorcontrib><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Polimery</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Kelar, K</au><au>Olejniczak, J</au><au>Mencel, K</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>MODIFICATION OF POLYAMIDE 6 WITH HALLOYSITE NANOTUBES</atitle><jtitle>Polimery</jtitle><date>2013-01-01</date><risdate>2013</risdate><volume>58</volume><issue>1</issue><spage>18</spage><epage>23</epage><pages>18-23</pages><issn>0032-2725</issn><abstract>The effect of halloysite nanotubes (HNT) (Fig. 1) on the structure as well as thermal and mechanical properties of the composites based on polyamide-6 (PA 6/HNT) has been studied. The content of HNT in the composites was 2, 4 or 6 weight percent. The composites were prepared by double extrusion using a single-screw extruder. The degree of dispersion of HNT in polyamide matrix was analyzed by mapping the distribution of silicon atoms in the composites. The melt flow rate (MFR, Table 1), actual content of HNT in the composites (Table 1), strength properties in a static tensile test as well as the structure by differential scanning calorimetry (DSC, Fig. 3, Fig. 4, Table 2) and dynamic mechanical thermal analysis (DMTA, Fig. 5, Fig. 6, Table 3) were examined. It was found that the degree of HNT dispersion in the polymer matrix depended on their weight content and that the presence of HNT affected the process of PA 6 crystallization in the composites (Fig. 2, Table 2). It was indicated that the double extrusion resulted in a partial degradation of PA 6 macromolecules (Table 1).Original Abstract: Zbadano wplyw haloizytowych nanorurek (HNT) na strukture, wlasciwosci cieplne i mechaniczne kompozytow na bazie poliamidu 6 (PA 6/HNT). Zawartosc HNT w kompozytach wynosila 2, 4 lub 6 % mas. Kompozyty otrzymano na drodze dwukrotnego wytlaczania przy uzyciu wytlaczarki jednoslimakowej. Stopien zdyspergowania HNT w poliamidowej matrycy analizowano na podstawie map rozkladu atomow krzemu w kompozytach. Oznaczano: wskaznik szybkosci plyniecia (MFR), rzeczywista zawartosc HNT w kompozytach, cechy wytrzymalosciowe w probie statycznego rozciagania, strukture -- metoda skaningowej kalorymetrii roznicowej (DSC) i dynamicznej analizy termomechanicznej (DMTA). Stwierdzono, ze stopien zdyspergowania HNT w matrycy polimerowej zalezy od ich masowego udzialu oraz, ze nanorurki haloizytowe wplywaja na proces krystalizacji PA 6 w kompozytach. Wykazano, ze dwukrotne wytlaczanie powoduie czesciowa degradacje makroczasteczek PA 6.</abstract></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0032-2725 |
ispartof | Polimery, 2013-01, Vol.58 (1), p.18-23 |
issn | 0032-2725 |
language | pol |
recordid | cdi_proquest_miscellaneous_1315704208 |
source | EZB-FREE-00999 freely available EZB journals |
subjects | Differential scanning calorimetry Dispersions Extrusion Macromolecules Nanotubes Polyamide resins Polymer matrix composites Tables (data) |
title | MODIFICATION OF POLYAMIDE 6 WITH HALLOYSITE NANOTUBES |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-26T21%3A18%3A59IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=MODIFICATION%20OF%20POLYAMIDE%206%20WITH%20HALLOYSITE%20NANOTUBES&rft.jtitle=Polimery&rft.au=Kelar,%20K&rft.date=2013-01-01&rft.volume=58&rft.issue=1&rft.spage=18&rft.epage=23&rft.pages=18-23&rft.issn=0032-2725&rft_id=info:doi/&rft_dat=%3Cproquest%3E1315704208%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1315704208&rft_id=info:pmid/&rfr_iscdi=true |