Evaluation of mechanical strength and fracture characteristic of polymeric composite reinforced with fiber glass in contact with sea water
Due to an increasing use of composite materials in the industry in general, especially in the oil and natural gas area, it is necessary a more detailed study of its mechanical properties. The composite consists of joining two or more materials in order to obtain another, with superior properties to...
Gespeichert in:
| Veröffentlicht in: | Tecnologia em Metalurgia, Materiais e Mineracao Materiais e Mineracao, 2010-01, Vol.20100726, p.1324-1334 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 1334 |
|---|---|
| container_issue | |
| container_start_page | 1324 |
| container_title | Tecnologia em Metalurgia, Materiais e Mineracao |
| container_volume | 20100726 |
| creator | Felipe, Renata Carla Tavares Dos Santos Dantas, Camilla De Medeiros Felipe, Raimundo Nonato Barbosa De Medeiros, Gilson Gomes |
| description | Due to an increasing use of composite materials in the industry in general, especially in the oil and natural gas area, it is necessary a more detailed study of its mechanical properties. The composite consists of joining two or more materials in order to obtain another, with superior properties to those of each component individually. Therefore, the objective of this study is to evaluate the mechanical properties of tensile and bending as well as the characteristic of final fracture of the composite, the plastic reinforced by fiberglass and polyester resin, when it is in contact with sea water and compare them with the dry state. This paper also has the contribution to establish more safely the use of this composite when used in the maritime waters to transport fluids in the oil and natural gas industry. The samples were made from the manufacture of plates by the manual lamination process (hand lay up). As a result, there was little influence of sea water in the tensile and three-point bending properties of the composite and in the characteristic of the final fracture. |
| format | Article |
| fullrecord | <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_miscellaneous_1136451823</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1136451823</sourcerecordid><originalsourceid>FETCH-proquest_miscellaneous_11364518233</originalsourceid><addsrcrecordid>eNqVjEEOAUEURHtBQnCHv7SR6Blj7IU4gL187ff4SU_36N9DXMGptXABq6pKVb2BGhe6Xi90pauRmonweVnUlS71qh6r1-6OrsfEwUOw0JK5omeDDiRF8k26AvoL2Igm9ZEg1x9LkSWx-Vy64J5tzgZMaLsgnAgisbchGrrAgzPC8pkiNA5FgH0e-pQh304I4YGZOFVDi05o9tOJmu93x-1h0cVw60nSqWUx5Bx6Cr2ctC7Xq0pvirL8Y_oGTclZ7g</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1136451823</pqid></control><display><type>article</type><title>Evaluation of mechanical strength and fracture characteristic of polymeric composite reinforced with fiber glass in contact with sea water</title><source>Alma/SFX Local Collection</source><creator>Felipe, Renata Carla Tavares Dos Santos ; Dantas, Camilla De Medeiros ; Felipe, Raimundo Nonato Barbosa ; De Medeiros, Gilson Gomes</creator><creatorcontrib>Felipe, Renata Carla Tavares Dos Santos ; Dantas, Camilla De Medeiros ; Felipe, Raimundo Nonato Barbosa ; De Medeiros, Gilson Gomes</creatorcontrib><description>Due to an increasing use of composite materials in the industry in general, especially in the oil and natural gas area, it is necessary a more detailed study of its mechanical properties. The composite consists of joining two or more materials in order to obtain another, with superior properties to those of each component individually. Therefore, the objective of this study is to evaluate the mechanical properties of tensile and bending as well as the characteristic of final fracture of the composite, the plastic reinforced by fiberglass and polyester resin, when it is in contact with sea water and compare them with the dry state. This paper also has the contribution to establish more safely the use of this composite when used in the maritime waters to transport fluids in the oil and natural gas industry. The samples were made from the manufacture of plates by the manual lamination process (hand lay up). As a result, there was little influence of sea water in the tensile and three-point bending properties of the composite and in the characteristic of the final fracture.</description><identifier>ISSN: 2176-1515</identifier><language>eng</language><subject>Contact ; Fracture mechanics ; Glass fiber reinforced plastics ; Lay up ; Mechanical properties ; Natural gas ; Natural gas industry ; Sea water</subject><ispartof>Tecnologia em Metalurgia, Materiais e Mineracao, 2010-01, Vol.20100726, p.1324-1334</ispartof><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784</link.rule.ids></links><search><creatorcontrib>Felipe, Renata Carla Tavares Dos Santos</creatorcontrib><creatorcontrib>Dantas, Camilla De Medeiros</creatorcontrib><creatorcontrib>Felipe, Raimundo Nonato Barbosa</creatorcontrib><creatorcontrib>De Medeiros, Gilson Gomes</creatorcontrib><title>Evaluation of mechanical strength and fracture characteristic of polymeric composite reinforced with fiber glass in contact with sea water</title><title>Tecnologia em Metalurgia, Materiais e Mineracao</title><description>Due to an increasing use of composite materials in the industry in general, especially in the oil and natural gas area, it is necessary a more detailed study of its mechanical properties. The composite consists of joining two or more materials in order to obtain another, with superior properties to those of each component individually. Therefore, the objective of this study is to evaluate the mechanical properties of tensile and bending as well as the characteristic of final fracture of the composite, the plastic reinforced by fiberglass and polyester resin, when it is in contact with sea water and compare them with the dry state. This paper also has the contribution to establish more safely the use of this composite when used in the maritime waters to transport fluids in the oil and natural gas industry. The samples were made from the manufacture of plates by the manual lamination process (hand lay up). As a result, there was little influence of sea water in the tensile and three-point bending properties of the composite and in the characteristic of the final fracture.</description><subject>Contact</subject><subject>Fracture mechanics</subject><subject>Glass fiber reinforced plastics</subject><subject>Lay up</subject><subject>Mechanical properties</subject><subject>Natural gas</subject><subject>Natural gas industry</subject><subject>Sea water</subject><issn>2176-1515</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2010</creationdate><recordtype>article</recordtype><recordid>eNqVjEEOAUEURHtBQnCHv7SR6Blj7IU4gL187ff4SU_36N9DXMGptXABq6pKVb2BGhe6Xi90pauRmonweVnUlS71qh6r1-6OrsfEwUOw0JK5omeDDiRF8k26AvoL2Igm9ZEg1x9LkSWx-Vy64J5tzgZMaLsgnAgisbchGrrAgzPC8pkiNA5FgH0e-pQh304I4YGZOFVDi05o9tOJmu93x-1h0cVw60nSqWUx5Bx6Cr2ctC7Xq0pvirL8Y_oGTclZ7g</recordid><startdate>20100101</startdate><enddate>20100101</enddate><creator>Felipe, Renata Carla Tavares Dos Santos</creator><creator>Dantas, Camilla De Medeiros</creator><creator>Felipe, Raimundo Nonato Barbosa</creator><creator>De Medeiros, Gilson Gomes</creator><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20100101</creationdate><title>Evaluation of mechanical strength and fracture characteristic of polymeric composite reinforced with fiber glass in contact with sea water</title><author>Felipe, Renata Carla Tavares Dos Santos ; Dantas, Camilla De Medeiros ; Felipe, Raimundo Nonato Barbosa ; De Medeiros, Gilson Gomes</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_miscellaneous_11364518233</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2010</creationdate><topic>Contact</topic><topic>Fracture mechanics</topic><topic>Glass fiber reinforced plastics</topic><topic>Lay up</topic><topic>Mechanical properties</topic><topic>Natural gas</topic><topic>Natural gas industry</topic><topic>Sea water</topic><toplevel>online_resources</toplevel><creatorcontrib>Felipe, Renata Carla Tavares Dos Santos</creatorcontrib><creatorcontrib>Dantas, Camilla De Medeiros</creatorcontrib><creatorcontrib>Felipe, Raimundo Nonato Barbosa</creatorcontrib><creatorcontrib>De Medeiros, Gilson Gomes</creatorcontrib><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Tecnologia em Metalurgia, Materiais e Mineracao</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Felipe, Renata Carla Tavares Dos Santos</au><au>Dantas, Camilla De Medeiros</au><au>Felipe, Raimundo Nonato Barbosa</au><au>De Medeiros, Gilson Gomes</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Evaluation of mechanical strength and fracture characteristic of polymeric composite reinforced with fiber glass in contact with sea water</atitle><jtitle>Tecnologia em Metalurgia, Materiais e Mineracao</jtitle><date>2010-01-01</date><risdate>2010</risdate><volume>20100726</volume><spage>1324</spage><epage>1334</epage><pages>1324-1334</pages><issn>2176-1515</issn><abstract>Due to an increasing use of composite materials in the industry in general, especially in the oil and natural gas area, it is necessary a more detailed study of its mechanical properties. The composite consists of joining two or more materials in order to obtain another, with superior properties to those of each component individually. Therefore, the objective of this study is to evaluate the mechanical properties of tensile and bending as well as the characteristic of final fracture of the composite, the plastic reinforced by fiberglass and polyester resin, when it is in contact with sea water and compare them with the dry state. This paper also has the contribution to establish more safely the use of this composite when used in the maritime waters to transport fluids in the oil and natural gas industry. The samples were made from the manufacture of plates by the manual lamination process (hand lay up). As a result, there was little influence of sea water in the tensile and three-point bending properties of the composite and in the characteristic of the final fracture.</abstract></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 2176-1515 |
| ispartof | Tecnologia em Metalurgia, Materiais e Mineracao, 2010-01, Vol.20100726, p.1324-1334 |
| issn | 2176-1515 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_1136451823 |
| source | Alma/SFX Local Collection |
| subjects | Contact Fracture mechanics Glass fiber reinforced plastics Lay up Mechanical properties Natural gas Natural gas industry Sea water |
| title | Evaluation of mechanical strength and fracture characteristic of polymeric composite reinforced with fiber glass in contact with sea water |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-18T20%3A46%3A11IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Evaluation%20of%20mechanical%20strength%20and%20fracture%20characteristic%20of%20polymeric%20composite%20reinforced%20with%20fiber%20glass%20in%20contact%20with%20sea%20water&rft.jtitle=Tecnologia%20em%20Metalurgia,%20Materiais%20e%20Mineracao&rft.au=Felipe,%20Renata%20Carla%20Tavares%20Dos%20Santos&rft.date=2010-01-01&rft.volume=20100726&rft.spage=1324&rft.epage=1334&rft.pages=1324-1334&rft.issn=2176-1515&rft_id=info:doi/&rft_dat=%3Cproquest%3E1136451823%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1136451823&rft_id=info:pmid/&rfr_iscdi=true |