Does screw–bone interface modelling matter in finite element analyses?

Abstract The effect of screw–bone interface modelling strategies was evaluated in the setting of a tibial mid-shaft fracture stabilised using locking plates. Three interface models were examined: fully bonded interface; screw with sliding contact with bone; and screw with sliding contact with bone in an undersized pilot hole. For the simulation of the last interface condition we used a novel thermal expansion approach to generate the pre-stress that the bone would be exposed to during screw insertion. The study finds that the global load-deformation response is not influenced by the interface modelling approach employed; the deformation varied by less than 1% between different interaction models. However, interface modelling is found to have a considerable impact on the local stress–strain environment within the bone in the vicinity of the screws. Frictional and tied representations did not have significantly different peak strain values (