Influence of Strand Design, Boron Type, and Carbon Doping Method on the Transport Properties of Powder-in-Tube [Formula Omitted] Strands

The transport properties of a number of [Formula Omitted] strands have been investigated in terms of their response to strand design, starting B powder choice, and the approach to C doping used. The strands had the following various designs: 1) several chemical barriers were introduced, i.e., Fe and...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on applied superconductivity 2012-04, Vol.22 (2), p.6200110
Hauptverfasser: Yang, Yuan, Susner, Michael A, Sumption, Mike D, Rindfleisch, Matt, Tomsic, Mike, Collings, Edward W
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue 2
container_start_page 6200110
container_title IEEE transactions on applied superconductivity
container_volume 22
creator Yang, Yuan
Susner, Michael A
Sumption, Mike D
Rindfleisch, Matt
Tomsic, Mike
Collings, Edward W
description The transport properties of a number of [Formula Omitted] strands have been investigated in terms of their response to strand design, starting B powder choice, and the approach to C doping used. The strands had the following various designs: 1) several chemical barriers were introduced, i.e., Fe and Nb; 2) the strands were encased in various outer sheath materials, i.e., monel, Cu [Formula Omitted] monel, monel [Formula Omitted] glidcop, and Nb [Formula Omitted] monel; 3) the filament counts were varied (1, 18, and 36); and 4) the final strand diameter was varied. In addition, for a subset of the strand designs, several B powder and C-dopant types were investigated. In particular, the following two types of amorphous B powder were used: 1) Moissan-based Tangshan boron from Tangshan Weihao Magnesium Powder Company Ltd., Tangshan, Hebei, China, and 2) SMI boron from Specialty Metals Inc., Huntington, WV, USA, which is produced in a plasma torch by the reduction-by-hydrogen of [Formula Omitted]. The following two approaches to C doping were taken: 1) malic-acid treatment, in which C is introduced into the B powder precursor by the moderate temperature drying out a slurry of B mixed in with a malic acid-toluene solution (during which the malic acid decomposes, leaving C as the only solid residue) before the Mg powder is mixed in, and 2) direct C doping of the SMI-produced B by introducing a known percentage of [Formula Omitted] into the plasma flame. Critical current densities [Formula Omitted] were measured on 1.5-m-long samples at 4.2 K in fields of up to 14 T. Of all the strands measured, the strand doped with SMI-C at a nominal 4 mol% C yielded the highest [Formula Omitted] values, e.g., [Formula Omitted] at 7 T, [Formula Omitted] at 10 T, and [Formula Omitted] at 12 T. The [Formula Omitted]-values are given for all strands at 5 and 10 T, and for a certain set of strands, the magnetic field dependencies of the [Formula Omitted] -values and the influence of C doping is presented. Finally, we demonstrate that, over a wide range of [Formula Omitted], [Formula Omitted] linearly decreases with [Formula Omitted] with a slope [Formula Omitted] such that the [Formula Omitted] of any strand can be parameterized in terms of [Formula Omitted] and its zero-field intercept [Formula Omitted].
doi_str_mv 10.1109/TASC.2012.2184539
format Article
fullrecord <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_journals_993897348</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2632381631</sourcerecordid><originalsourceid>FETCH-proquest_journals_9938973483</originalsourceid><addsrcrecordid>eNqNjU1OwzAQRi0EEuXnAOxGrJtgO7Gwl5BSwQJRqd4hVKVk0qZKPcF2hLgBx8aVegBW3-jNm_kYuxE8F4KbO_uwrHLJhcyl0KUqzAmbCKV0JpVQp2nmSmRayuKcXYSw41yUSZuw3xfX9iO6TwRqYRl97RqYYeg2bgqP5MmB_RlwCgde1X6dwIyGzm3gFeOWGkggbhFsugwD-QgLTwP62GE4vFzQd4M-61xmxzXC-5z8fuxreNt3MWLzcewMV-ysrfuA18e8ZLfzJ1s9Z4OnrxFDXO1o9C6tVsYU2twXpS7-Jf0BgHpY1w</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>993897348</pqid></control><display><type>article</type><title>Influence of Strand Design, Boron Type, and Carbon Doping Method on the Transport Properties of Powder-in-Tube [Formula Omitted] Strands</title><source>IEEE Electronic Library (IEL)</source><creator>Yang, Yuan ; Susner, Michael A ; Sumption, Mike D ; Rindfleisch, Matt ; Tomsic, Mike ; Collings, Edward W</creator><creatorcontrib>Yang, Yuan ; Susner, Michael A ; Sumption, Mike D ; Rindfleisch, Matt ; Tomsic, Mike ; Collings, Edward W</creatorcontrib><description>The transport properties of a number of [Formula Omitted] strands have been investigated in terms of their response to strand design, starting B powder choice, and the approach to C doping used. The strands had the following various designs: 1) several chemical barriers were introduced, i.e., Fe and Nb; 2) the strands were encased in various outer sheath materials, i.e., monel, Cu [Formula Omitted] monel, monel [Formula Omitted] glidcop, and Nb [Formula Omitted] monel; 3) the filament counts were varied (1, 18, and 36); and 4) the final strand diameter was varied. In addition, for a subset of the strand designs, several B powder and C-dopant types were investigated. In particular, the following two types of amorphous B powder were used: 1) Moissan-based Tangshan boron from Tangshan Weihao Magnesium Powder Company Ltd., Tangshan, Hebei, China, and 2) SMI boron from Specialty Metals Inc., Huntington, WV, USA, which is produced in a plasma torch by the reduction-by-hydrogen of [Formula Omitted]. The following two approaches to C doping were taken: 1) malic-acid treatment, in which C is introduced into the B powder precursor by the moderate temperature drying out a slurry of B mixed in with a malic acid-toluene solution (during which the malic acid decomposes, leaving C as the only solid residue) before the Mg powder is mixed in, and 2) direct C doping of the SMI-produced B by introducing a known percentage of [Formula Omitted] into the plasma flame. Critical current densities [Formula Omitted] were measured on 1.5-m-long samples at 4.2 K in fields of up to 14 T. Of all the strands measured, the strand doped with SMI-C at a nominal 4 mol% C yielded the highest [Formula Omitted] values, e.g., [Formula Omitted] at 7 T, [Formula Omitted] at 10 T, and [Formula Omitted] at 12 T. The [Formula Omitted]-values are given for all strands at 5 and 10 T, and for a certain set of strands, the magnetic field dependencies of the [Formula Omitted] -values and the influence of C doping is presented. Finally, we demonstrate that, over a wide range of [Formula Omitted], [Formula Omitted] linearly decreases with [Formula Omitted] with a slope [Formula Omitted] such that the [Formula Omitted] of any strand can be parameterized in terms of [Formula Omitted] and its zero-field intercept [Formula Omitted].</description><identifier>ISSN: 1051-8223</identifier><identifier>EISSN: 1558-2515</identifier><identifier>DOI: 10.1109/TASC.2012.2184539</identifier><language>eng</language><publisher>New York: The Institute of Electrical and Electronics Engineers, Inc. (IEEE)</publisher><ispartof>IEEE transactions on applied superconductivity, 2012-04, Vol.22 (2), p.6200110</ispartof><rights>Copyright The Institute of Electrical and Electronics Engineers, Inc. (IEEE) Apr 2012</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids></links><search><creatorcontrib>Yang, Yuan</creatorcontrib><creatorcontrib>Susner, Michael A</creatorcontrib><creatorcontrib>Sumption, Mike D</creatorcontrib><creatorcontrib>Rindfleisch, Matt</creatorcontrib><creatorcontrib>Tomsic, Mike</creatorcontrib><creatorcontrib>Collings, Edward W</creatorcontrib><title>Influence of Strand Design, Boron Type, and Carbon Doping Method on the Transport Properties of Powder-in-Tube [Formula Omitted] Strands</title><title>IEEE transactions on applied superconductivity</title><description>The transport properties of a number of [Formula Omitted] strands have been investigated in terms of their response to strand design, starting B powder choice, and the approach to C doping used. The strands had the following various designs: 1) several chemical barriers were introduced, i.e., Fe and Nb; 2) the strands were encased in various outer sheath materials, i.e., monel, Cu [Formula Omitted] monel, monel [Formula Omitted] glidcop, and Nb [Formula Omitted] monel; 3) the filament counts were varied (1, 18, and 36); and 4) the final strand diameter was varied. In addition, for a subset of the strand designs, several B powder and C-dopant types were investigated. In particular, the following two types of amorphous B powder were used: 1) Moissan-based Tangshan boron from Tangshan Weihao Magnesium Powder Company Ltd., Tangshan, Hebei, China, and 2) SMI boron from Specialty Metals Inc., Huntington, WV, USA, which is produced in a plasma torch by the reduction-by-hydrogen of [Formula Omitted]. The following two approaches to C doping were taken: 1) malic-acid treatment, in which C is introduced into the B powder precursor by the moderate temperature drying out a slurry of B mixed in with a malic acid-toluene solution (during which the malic acid decomposes, leaving C as the only solid residue) before the Mg powder is mixed in, and 2) direct C doping of the SMI-produced B by introducing a known percentage of [Formula Omitted] into the plasma flame. Critical current densities [Formula Omitted] were measured on 1.5-m-long samples at 4.2 K in fields of up to 14 T. Of all the strands measured, the strand doped with SMI-C at a nominal 4 mol% C yielded the highest [Formula Omitted] values, e.g., [Formula Omitted] at 7 T, [Formula Omitted] at 10 T, and [Formula Omitted] at 12 T. The [Formula Omitted]-values are given for all strands at 5 and 10 T, and for a certain set of strands, the magnetic field dependencies of the [Formula Omitted] -values and the influence of C doping is presented. Finally, we demonstrate that, over a wide range of [Formula Omitted], [Formula Omitted] linearly decreases with [Formula Omitted] with a slope [Formula Omitted] such that the [Formula Omitted] of any strand can be parameterized in terms of [Formula Omitted] and its zero-field intercept [Formula Omitted].</description><issn>1051-8223</issn><issn>1558-2515</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2012</creationdate><recordtype>article</recordtype><recordid>eNqNjU1OwzAQRi0EEuXnAOxGrJtgO7Gwl5BSwQJRqd4hVKVk0qZKPcF2hLgBx8aVegBW3-jNm_kYuxE8F4KbO_uwrHLJhcyl0KUqzAmbCKV0JpVQp2nmSmRayuKcXYSw41yUSZuw3xfX9iO6TwRqYRl97RqYYeg2bgqP5MmB_RlwCgde1X6dwIyGzm3gFeOWGkggbhFsugwD-QgLTwP62GE4vFzQd4M-61xmxzXC-5z8fuxreNt3MWLzcewMV-ysrfuA18e8ZLfzJ1s9Z4OnrxFDXO1o9C6tVsYU2twXpS7-Jf0BgHpY1w</recordid><startdate>20120401</startdate><enddate>20120401</enddate><creator>Yang, Yuan</creator><creator>Susner, Michael A</creator><creator>Sumption, Mike D</creator><creator>Rindfleisch, Matt</creator><creator>Tomsic, Mike</creator><creator>Collings, Edward W</creator><general>The Institute of Electrical and Electronics Engineers, Inc. (IEEE)</general><scope>7SP</scope><scope>7U5</scope><scope>8FD</scope><scope>L7M</scope></search><sort><creationdate>20120401</creationdate><title>Influence of Strand Design, Boron Type, and Carbon Doping Method on the Transport Properties of Powder-in-Tube [Formula Omitted] Strands</title><author>Yang, Yuan ; Susner, Michael A ; Sumption, Mike D ; Rindfleisch, Matt ; Tomsic, Mike ; Collings, Edward W</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_journals_9938973483</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2012</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Yang, Yuan</creatorcontrib><creatorcontrib>Susner, Michael A</creatorcontrib><creatorcontrib>Sumption, Mike D</creatorcontrib><creatorcontrib>Rindfleisch, Matt</creatorcontrib><creatorcontrib>Tomsic, Mike</creatorcontrib><creatorcontrib>Collings, Edward W</creatorcontrib><collection>Electronics &amp; Communications Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>Technology Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>IEEE transactions on applied superconductivity</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Yang, Yuan</au><au>Susner, Michael A</au><au>Sumption, Mike D</au><au>Rindfleisch, Matt</au><au>Tomsic, Mike</au><au>Collings, Edward W</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Influence of Strand Design, Boron Type, and Carbon Doping Method on the Transport Properties of Powder-in-Tube [Formula Omitted] Strands</atitle><jtitle>IEEE transactions on applied superconductivity</jtitle><date>2012-04-01</date><risdate>2012</risdate><volume>22</volume><issue>2</issue><spage>6200110</spage><pages>6200110-</pages><issn>1051-8223</issn><eissn>1558-2515</eissn><abstract>The transport properties of a number of [Formula Omitted] strands have been investigated in terms of their response to strand design, starting B powder choice, and the approach to C doping used. The strands had the following various designs: 1) several chemical barriers were introduced, i.e., Fe and Nb; 2) the strands were encased in various outer sheath materials, i.e., monel, Cu [Formula Omitted] monel, monel [Formula Omitted] glidcop, and Nb [Formula Omitted] monel; 3) the filament counts were varied (1, 18, and 36); and 4) the final strand diameter was varied. In addition, for a subset of the strand designs, several B powder and C-dopant types were investigated. In particular, the following two types of amorphous B powder were used: 1) Moissan-based Tangshan boron from Tangshan Weihao Magnesium Powder Company Ltd., Tangshan, Hebei, China, and 2) SMI boron from Specialty Metals Inc., Huntington, WV, USA, which is produced in a plasma torch by the reduction-by-hydrogen of [Formula Omitted]. The following two approaches to C doping were taken: 1) malic-acid treatment, in which C is introduced into the B powder precursor by the moderate temperature drying out a slurry of B mixed in with a malic acid-toluene solution (during which the malic acid decomposes, leaving C as the only solid residue) before the Mg powder is mixed in, and 2) direct C doping of the SMI-produced B by introducing a known percentage of [Formula Omitted] into the plasma flame. Critical current densities [Formula Omitted] were measured on 1.5-m-long samples at 4.2 K in fields of up to 14 T. Of all the strands measured, the strand doped with SMI-C at a nominal 4 mol% C yielded the highest [Formula Omitted] values, e.g., [Formula Omitted] at 7 T, [Formula Omitted] at 10 T, and [Formula Omitted] at 12 T. The [Formula Omitted]-values are given for all strands at 5 and 10 T, and for a certain set of strands, the magnetic field dependencies of the [Formula Omitted] -values and the influence of C doping is presented. Finally, we demonstrate that, over a wide range of [Formula Omitted], [Formula Omitted] linearly decreases with [Formula Omitted] with a slope [Formula Omitted] such that the [Formula Omitted] of any strand can be parameterized in terms of [Formula Omitted] and its zero-field intercept [Formula Omitted].</abstract><cop>New York</cop><pub>The Institute of Electrical and Electronics Engineers, Inc. (IEEE)</pub><doi>10.1109/TASC.2012.2184539</doi></addata></record>
fulltext fulltext
identifier ISSN: 1051-8223
ispartof IEEE transactions on applied superconductivity, 2012-04, Vol.22 (2), p.6200110
issn 1051-8223
1558-2515
language eng
recordid cdi_proquest_journals_993897348
source IEEE Electronic Library (IEL)
title Influence of Strand Design, Boron Type, and Carbon Doping Method on the Transport Properties of Powder-in-Tube [Formula Omitted] Strands
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-30T12%3A38%3A46IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Influence%20of%20Strand%20Design,%20Boron%20Type,%20and%20Carbon%20Doping%20Method%20on%20the%20Transport%20Properties%20of%20Powder-in-Tube%20%5BFormula%20Omitted%5D%20Strands&rft.jtitle=IEEE%20transactions%20on%20applied%20superconductivity&rft.au=Yang,%20Yuan&rft.date=2012-04-01&rft.volume=22&rft.issue=2&rft.spage=6200110&rft.pages=6200110-&rft.issn=1051-8223&rft.eissn=1558-2515&rft_id=info:doi/10.1109/TASC.2012.2184539&rft_dat=%3Cproquest%3E2632381631%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=993897348&rft_id=info:pmid/&rfr_iscdi=true