A Correlation Study Between Geometry of Collared Coils and Normal Quadrupole Multipole in the Main LHC Dipoles

The quality control implemented at all LHC dipole assemblers includes precise mechanical measurements of the geometry of collared coils. A cross-analysis performed between mechanical and magnetic measurements data shows a correlation between collared coils outer dimensions and the normal quadrupole multipole (b 2 ) for one dipole assembler. The profile geometry of the single collars-as determined from 3D measurements at the collar suppliers and CERN-could not account alone for the significant left-right aperture asymmetry observed. This triggered a deeper investigation on different elements of the geometry of single collars. The results of this work show that the relative positioning of the collaring holes, allowing a small bending deformation of collars under the effect of coil pre-stress, is an important effect that generates a b 2 multipole at the limit of specification. The study has deepened the understanding of the factors affecting collared coil geometry and field quality. The precision of 3D measurements at the collar suppliers and at CERN has been improved, and a tighter quality control has been introduced at the collar suppliers