Fabrication process of planarized multi-layer Nb integrated circuits

To improve the operating speed and density of Nb single-flux-quantum integrated circuits, we developed an advanced fabrication process based on NEC's standard process. We fabricated planarized six-Nb-layer circuit structures using this advanced process. This new structure has four Nb wiring layers for greater design flexibility. To shield the magnetic field produced by the DC bias current, the DC bias power supply layer was placed under the groundplane. The critical current density of the Josephson junction was 10 kA/cm/sup 2/. We fabricated and tested more than 10 wafers and demonstrated that the six-layer circuits were successfully planarized. We also confirmed insulation between each Nb layer and the reliability of superconducting contacts. This planarization did not significantly degrade the junction characteristics. We measured small spreads in the critical current of less than 2%. These results demonstrated the effectiveness of this advanced process based on mechanical-polishing planarization.