Experimental study on indirect mineral carbonation using five types of slag for production of high-purity calcium carbonate
Mineral carbonation is one of the known methods for carbon capture, utilization, and storage (CCUS). Slag from the steel industry is studied as a common source of CaCO 3 via mineral carbonation owing to its high Ca content. Despite numerous preliminary studies, the optimal factors governing the mine...
Gespeichert in:
| Veröffentlicht in: | Journal of material cycles and waste management 2024-07, Vol.26 (4), p.2366-2377 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 2377 |
|---|---|
| container_issue | 4 |
| container_start_page | 2366 |
| container_title | Journal of material cycles and waste management |
| container_volume | 26 |
| creator | Son, Juhee Kang, Jo Hong Kim, Kwanghwi Song, Hojun Park, Hyun Sic |
| description | Mineral carbonation is one of the known methods for carbon capture, utilization, and storage (CCUS). Slag from the steel industry is studied as a common source of CaCO
3
via mineral carbonation owing to its high Ca content. Despite numerous preliminary studies, the optimal factors governing the mineral carbonation of steelmaking slag, such as extraction and carbonation remain unexplored. In this study, we optimized the factors for Ca extraction and carbonation, as CaCO
3
produced under these optimized factors possesses commercial value due to its high purity. The extraction and carbonation experiments were performed on two types of slag samples, specifically non-magnetic steelmaking and pig iron slag, utilizing the chosen factors for each procedure. NH
4
Cl was chosen as the extractant because of its high calcium selectivity and inhibition of gel formation. Precipitates with Ca content ≥ 98% were obtained by extracting and carbonating them. The crystalline form and particle size of CaCO
3
in the precipitates were determined by the pH control. The findings of this study will be used to improve the design of precipitated calcium carbonate (PCC) production processes and increase the economic value of their output. |
| doi_str_mv | 10.1007/s10163-024-01980-0 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_3074863638</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>3074863638</sourcerecordid><originalsourceid>FETCH-LOGICAL-c270t-fc4db27a67c1649434bdf382eb8b016264365c5b7869f3b9129010ade37e9e6e3</originalsourceid><addsrcrecordid>eNp9kEtPAyEUhYnRxFr9A65IXKO8CszSNPWRmLjRNWEYpqWZMiMwxol_XmyN7lzdm3vPOXA_AC4JviYYy5tEMBEMYcoRJpXCCB-BGRGEIEWpPC49ZwrxaiFPwVlKW4xphZmcgc_Vx-Ci37mQTQdTHpsJ9gH60PjobIY7H1wsG2ti3QeTfVmOyYc1bP27g3kaXIJ9C1NnyqiPcIh9M9q9row3fr1Bwxh9nkpEZ_24-41y5-CkNV1yFz91Dl7vVi_LB_T0fP-4vH1ClkqcUWt5U1NphLRE8IozXjctU9TVqi5XU8GZWNhFLZWoWlZXpJxGsGkck65ywrE5uDrklr-9jS5lve3HGMqTmmHJlWCCqaKiB5WNfUrRtXooXEycNMH6G7I-QNYFst5D1riY2MGUijisXfyL_sf1BQJVgWw</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>3074863638</pqid></control><display><type>article</type><title>Experimental study on indirect mineral carbonation using five types of slag for production of high-purity calcium carbonate</title><source>Springer Nature - Complete Springer Journals</source><creator>Son, Juhee ; Kang, Jo Hong ; Kim, Kwanghwi ; Song, Hojun ; Park, Hyun Sic</creator><creatorcontrib>Son, Juhee ; Kang, Jo Hong ; Kim, Kwanghwi ; Song, Hojun ; Park, Hyun Sic</creatorcontrib><description>Mineral carbonation is one of the known methods for carbon capture, utilization, and storage (CCUS). Slag from the steel industry is studied as a common source of CaCO
3
via mineral carbonation owing to its high Ca content. Despite numerous preliminary studies, the optimal factors governing the mineral carbonation of steelmaking slag, such as extraction and carbonation remain unexplored. In this study, we optimized the factors for Ca extraction and carbonation, as CaCO
3
produced under these optimized factors possesses commercial value due to its high purity. The extraction and carbonation experiments were performed on two types of slag samples, specifically non-magnetic steelmaking and pig iron slag, utilizing the chosen factors for each procedure. NH
4
Cl was chosen as the extractant because of its high calcium selectivity and inhibition of gel formation. Precipitates with Ca content ≥ 98% were obtained by extracting and carbonating them. The crystalline form and particle size of CaCO
3
in the precipitates were determined by the pH control. The findings of this study will be used to improve the design of precipitated calcium carbonate (PCC) production processes and increase the economic value of their output.</description><identifier>ISSN: 1438-4957</identifier><identifier>EISSN: 1611-8227</identifier><identifier>DOI: 10.1007/s10163-024-01980-0</identifier><language>eng</language><publisher>Tokyo: Springer Japan</publisher><subject>Acids ; Ammonium chloride ; Calcium carbonate ; Carbon sequestration ; Carbonation ; Chemical precipitation ; Civil Engineering ; Climate change ; Efficiency ; Energy consumption ; Engineering ; Environmental Management ; Iron and steel industry ; Iron compounds ; Original Article ; Particle size ; pH control ; Pig iron ; Precipitates ; Purity ; Slag ; Steel industry ; Steel making ; Waste management ; Waste Management/Waste Technology</subject><ispartof>Journal of material cycles and waste management, 2024-07, Vol.26 (4), p.2366-2377</ispartof><rights>The Author(s), under exclusive licence to Springer Nature Japan KK, part of Springer Nature 2024. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c270t-fc4db27a67c1649434bdf382eb8b016264365c5b7869f3b9129010ade37e9e6e3</cites><orcidid>0000-0003-1839-2404</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://link.springer.com/content/pdf/10.1007/s10163-024-01980-0$$EPDF$$P50$$Gspringer$$H</linktopdf><linktohtml>$$Uhttps://link.springer.com/10.1007/s10163-024-01980-0$$EHTML$$P50$$Gspringer$$H</linktohtml><link.rule.ids>314,776,780,27901,27902,41464,42533,51294</link.rule.ids></links><search><creatorcontrib>Son, Juhee</creatorcontrib><creatorcontrib>Kang, Jo Hong</creatorcontrib><creatorcontrib>Kim, Kwanghwi</creatorcontrib><creatorcontrib>Song, Hojun</creatorcontrib><creatorcontrib>Park, Hyun Sic</creatorcontrib><title>Experimental study on indirect mineral carbonation using five types of slag for production of high-purity calcium carbonate</title><title>Journal of material cycles and waste management</title><addtitle>J Mater Cycles Waste Manag</addtitle><description>Mineral carbonation is one of the known methods for carbon capture, utilization, and storage (CCUS). Slag from the steel industry is studied as a common source of CaCO
3
via mineral carbonation owing to its high Ca content. Despite numerous preliminary studies, the optimal factors governing the mineral carbonation of steelmaking slag, such as extraction and carbonation remain unexplored. In this study, we optimized the factors for Ca extraction and carbonation, as CaCO
3
produced under these optimized factors possesses commercial value due to its high purity. The extraction and carbonation experiments were performed on two types of slag samples, specifically non-magnetic steelmaking and pig iron slag, utilizing the chosen factors for each procedure. NH
4
Cl was chosen as the extractant because of its high calcium selectivity and inhibition of gel formation. Precipitates with Ca content ≥ 98% were obtained by extracting and carbonating them. The crystalline form and particle size of CaCO
3
in the precipitates were determined by the pH control. The findings of this study will be used to improve the design of precipitated calcium carbonate (PCC) production processes and increase the economic value of their output.</description><subject>Acids</subject><subject>Ammonium chloride</subject><subject>Calcium carbonate</subject><subject>Carbon sequestration</subject><subject>Carbonation</subject><subject>Chemical precipitation</subject><subject>Civil Engineering</subject><subject>Climate change</subject><subject>Efficiency</subject><subject>Energy consumption</subject><subject>Engineering</subject><subject>Environmental Management</subject><subject>Iron and steel industry</subject><subject>Iron compounds</subject><subject>Original Article</subject><subject>Particle size</subject><subject>pH control</subject><subject>Pig iron</subject><subject>Precipitates</subject><subject>Purity</subject><subject>Slag</subject><subject>Steel industry</subject><subject>Steel making</subject><subject>Waste management</subject><subject>Waste Management/Waste Technology</subject><issn>1438-4957</issn><issn>1611-8227</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2024</creationdate><recordtype>article</recordtype><recordid>eNp9kEtPAyEUhYnRxFr9A65IXKO8CszSNPWRmLjRNWEYpqWZMiMwxol_XmyN7lzdm3vPOXA_AC4JviYYy5tEMBEMYcoRJpXCCB-BGRGEIEWpPC49ZwrxaiFPwVlKW4xphZmcgc_Vx-Ci37mQTQdTHpsJ9gH60PjobIY7H1wsG2ti3QeTfVmOyYc1bP27g3kaXIJ9C1NnyqiPcIh9M9q9row3fr1Bwxh9nkpEZ_24-41y5-CkNV1yFz91Dl7vVi_LB_T0fP-4vH1ClkqcUWt5U1NphLRE8IozXjctU9TVqi5XU8GZWNhFLZWoWlZXpJxGsGkck65ywrE5uDrklr-9jS5lve3HGMqTmmHJlWCCqaKiB5WNfUrRtXooXEycNMH6G7I-QNYFst5D1riY2MGUijisXfyL_sf1BQJVgWw</recordid><startdate>20240701</startdate><enddate>20240701</enddate><creator>Son, Juhee</creator><creator>Kang, Jo Hong</creator><creator>Kim, Kwanghwi</creator><creator>Song, Hojun</creator><creator>Park, Hyun Sic</creator><general>Springer Japan</general><general>Springer Nature B.V</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>7ST</scope><scope>8BQ</scope><scope>8FD</scope><scope>C1K</scope><scope>FR3</scope><scope>JG9</scope><scope>KR7</scope><scope>SOI</scope><orcidid>https://orcid.org/0000-0003-1839-2404</orcidid></search><sort><creationdate>20240701</creationdate><title>Experimental study on indirect mineral carbonation using five types of slag for production of high-purity calcium carbonate</title><author>Son, Juhee ; Kang, Jo Hong ; Kim, Kwanghwi ; Song, Hojun ; Park, Hyun Sic</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c270t-fc4db27a67c1649434bdf382eb8b016264365c5b7869f3b9129010ade37e9e6e3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2024</creationdate><topic>Acids</topic><topic>Ammonium chloride</topic><topic>Calcium carbonate</topic><topic>Carbon sequestration</topic><topic>Carbonation</topic><topic>Chemical precipitation</topic><topic>Civil Engineering</topic><topic>Climate change</topic><topic>Efficiency</topic><topic>Energy consumption</topic><topic>Engineering</topic><topic>Environmental Management</topic><topic>Iron and steel industry</topic><topic>Iron compounds</topic><topic>Original Article</topic><topic>Particle size</topic><topic>pH control</topic><topic>Pig iron</topic><topic>Precipitates</topic><topic>Purity</topic><topic>Slag</topic><topic>Steel industry</topic><topic>Steel making</topic><topic>Waste management</topic><topic>Waste Management/Waste Technology</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Son, Juhee</creatorcontrib><creatorcontrib>Kang, Jo Hong</creatorcontrib><creatorcontrib>Kim, Kwanghwi</creatorcontrib><creatorcontrib>Song, Hojun</creatorcontrib><creatorcontrib>Park, Hyun Sic</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Environment Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Environmental Sciences and Pollution Management</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Civil Engineering Abstracts</collection><collection>Environment Abstracts</collection><jtitle>Journal of material cycles and waste management</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Son, Juhee</au><au>Kang, Jo Hong</au><au>Kim, Kwanghwi</au><au>Song, Hojun</au><au>Park, Hyun Sic</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Experimental study on indirect mineral carbonation using five types of slag for production of high-purity calcium carbonate</atitle><jtitle>Journal of material cycles and waste management</jtitle><stitle>J Mater Cycles Waste Manag</stitle><date>2024-07-01</date><risdate>2024</risdate><volume>26</volume><issue>4</issue><spage>2366</spage><epage>2377</epage><pages>2366-2377</pages><issn>1438-4957</issn><eissn>1611-8227</eissn><abstract>Mineral carbonation is one of the known methods for carbon capture, utilization, and storage (CCUS). Slag from the steel industry is studied as a common source of CaCO
3
via mineral carbonation owing to its high Ca content. Despite numerous preliminary studies, the optimal factors governing the mineral carbonation of steelmaking slag, such as extraction and carbonation remain unexplored. In this study, we optimized the factors for Ca extraction and carbonation, as CaCO
3
produced under these optimized factors possesses commercial value due to its high purity. The extraction and carbonation experiments were performed on two types of slag samples, specifically non-magnetic steelmaking and pig iron slag, utilizing the chosen factors for each procedure. NH
4
Cl was chosen as the extractant because of its high calcium selectivity and inhibition of gel formation. Precipitates with Ca content ≥ 98% were obtained by extracting and carbonating them. The crystalline form and particle size of CaCO
3
in the precipitates were determined by the pH control. The findings of this study will be used to improve the design of precipitated calcium carbonate (PCC) production processes and increase the economic value of their output.</abstract><cop>Tokyo</cop><pub>Springer Japan</pub><doi>10.1007/s10163-024-01980-0</doi><tpages>12</tpages><orcidid>https://orcid.org/0000-0003-1839-2404</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1438-4957 |
| ispartof | Journal of material cycles and waste management, 2024-07, Vol.26 (4), p.2366-2377 |
| issn | 1438-4957 1611-8227 |
| language | eng |
| recordid | cdi_proquest_journals_3074863638 |
| source | Springer Nature - Complete Springer Journals |
| subjects | Acids Ammonium chloride Calcium carbonate Carbon sequestration Carbonation Chemical precipitation Civil Engineering Climate change Efficiency Energy consumption Engineering Environmental Management Iron and steel industry Iron compounds Original Article Particle size pH control Pig iron Precipitates Purity Slag Steel industry Steel making Waste management Waste Management/Waste Technology |
| title | Experimental study on indirect mineral carbonation using five types of slag for production of high-purity calcium carbonate |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-20T18%3A28%3A13IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Experimental%20study%20on%20indirect%20mineral%20carbonation%20using%20five%20types%20of%20slag%20for%20production%20of%20high-purity%20calcium%20carbonate&rft.jtitle=Journal%20of%20material%20cycles%20and%20waste%20management&rft.au=Son,%20Juhee&rft.date=2024-07-01&rft.volume=26&rft.issue=4&rft.spage=2366&rft.epage=2377&rft.pages=2366-2377&rft.issn=1438-4957&rft.eissn=1611-8227&rft_id=info:doi/10.1007/s10163-024-01980-0&rft_dat=%3Cproquest_cross%3E3074863638%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=3074863638&rft_id=info:pmid/&rfr_iscdi=true |