Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion
Electron powder bed fusion (EPBF), as one of the common additive manufacturing techniques, has received increasing attention. EPBF-processed Tİ-6A1-4V is widely used in biomedical and aerospace industries. However, titanium alloys prepared by EPBF have large pores and poor corrosion resistance. Heat...
Gespeichert in:
| Veröffentlicht in: | JOM (1989) 2024-06, Vol.76 (6), p.3039-3049 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 3049 |
|---|---|
| container_issue | 6 |
| container_start_page | 3039 |
| container_title | JOM (1989) |
| container_volume | 76 |
| creator | Huang, Junyuan Zhang, Wei Xu, Haiying Fang, Weiping |
| description | Electron powder bed fusion (EPBF), as one of the common additive manufacturing techniques, has received increasing attention. EPBF-processed Tİ-6A1-4V is widely used in biomedical and aerospace industries. However, titanium alloys prepared by EPBF have large pores and poor corrosion resistance. Heat treatment is a simple and non-polluting way to improve material properties. However, the effect of heat treatment on the corrosion resistance of EPBF-processed Tİ-6A1-4V alloy has not been thoroughly researched. In this paper, Tİ-6A1-4V samples processed by EPBF were treated with different heat treatment methods. All corrosion tests were performed in 3.5 wt.% NaCl solution at ambient temperature. HT800 has the highest content of ß phase, and the smallest grain boundary density, and therefore has the best corrosion resistance. The corrosion current of HT800 is reduced from 0.109 дА/cm2 unheated to 0.022 ^A/cm2, a reduction of 79.82%. |
| doi_str_mv | 10.1007/sll837-024-06537-y |
| format | Article |
| fullrecord | <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_journals_3058870903</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>3058870903</sourcerecordid><originalsourceid>FETCH-proquest_journals_30588709033</originalsourceid><addsrcrecordid>eNqNjMtuwjAQRb0oUnn0B7qy1LVhUhtiloCCWLKI2KKUTKQgE9OxLZS_ZyLxAWxmju6cuUJ8ZzDPAPJFcM7qXMGvUbBaMvUfYpyByZWx2n6KSQhXYNGss7EIRdPgJUrfyANWUZbE84YdJ53ceSIfWqYj-TtSbDEMZtmq1cYpc2KKVdemm9w45_tBq9MFa_nXy8JxLw2__lEjyS3H-zS0zcSoqVzAr9eeip99Ue4O6k7-P2GI56tP1PHprGFpbQ5r0Po96wlPm0_o</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>3058870903</pqid></control><display><type>article</type><title>Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion</title><source>SpringerLink Journals</source><creator>Huang, Junyuan ; Zhang, Wei ; Xu, Haiying ; Fang, Weiping</creator><creatorcontrib>Huang, Junyuan ; Zhang, Wei ; Xu, Haiying ; Fang, Weiping</creatorcontrib><description>Electron powder bed fusion (EPBF), as one of the common additive manufacturing techniques, has received increasing attention. EPBF-processed Tİ-6A1-4V is widely used in biomedical and aerospace industries. However, titanium alloys prepared by EPBF have large pores and poor corrosion resistance. Heat treatment is a simple and non-polluting way to improve material properties. However, the effect of heat treatment on the corrosion resistance of EPBF-processed Tİ-6A1-4V alloy has not been thoroughly researched. In this paper, Tİ-6A1-4V samples processed by EPBF were treated with different heat treatment methods. All corrosion tests were performed in 3.5 wt.% NaCl solution at ambient temperature. HT800 has the highest content of ß phase, and the smallest grain boundary density, and therefore has the best corrosion resistance. The corrosion current of HT800 is reduced from 0.109 дА/cm2 unheated to 0.022 ^A/cm2, a reduction of 79.82%.</description><identifier>ISSN: 1047-4838</identifier><identifier>DOI: 10.1007/sll837-024-06537-y</identifier><language>eng</language><publisher>New York: Springer Nature B.V</publisher><subject>Additive manufacturing ; Aerospace industry ; Ambient temperature ; Chemical vapor deposition ; Corrosion currents ; Corrosion effects ; Corrosion resistance ; Corrosion tests ; Grain boundaries ; Heat treatment ; Material properties ; Powder beds ; Powder metallurgy ; Titanium alloys ; Titanium base alloys</subject><ispartof>JOM (1989), 2024-06, Vol.76 (6), p.3039-3049</ispartof><rights>Copyright Springer Nature B.V. Jun 2024</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,27901,27902</link.rule.ids></links><search><creatorcontrib>Huang, Junyuan</creatorcontrib><creatorcontrib>Zhang, Wei</creatorcontrib><creatorcontrib>Xu, Haiying</creatorcontrib><creatorcontrib>Fang, Weiping</creatorcontrib><title>Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion</title><title>JOM (1989)</title><description>Electron powder bed fusion (EPBF), as one of the common additive manufacturing techniques, has received increasing attention. EPBF-processed Tİ-6A1-4V is widely used in biomedical and aerospace industries. However, titanium alloys prepared by EPBF have large pores and poor corrosion resistance. Heat treatment is a simple and non-polluting way to improve material properties. However, the effect of heat treatment on the corrosion resistance of EPBF-processed Tİ-6A1-4V alloy has not been thoroughly researched. In this paper, Tİ-6A1-4V samples processed by EPBF were treated with different heat treatment methods. All corrosion tests were performed in 3.5 wt.% NaCl solution at ambient temperature. HT800 has the highest content of ß phase, and the smallest grain boundary density, and therefore has the best corrosion resistance. The corrosion current of HT800 is reduced from 0.109 дА/cm2 unheated to 0.022 ^A/cm2, a reduction of 79.82%.</description><subject>Additive manufacturing</subject><subject>Aerospace industry</subject><subject>Ambient temperature</subject><subject>Chemical vapor deposition</subject><subject>Corrosion currents</subject><subject>Corrosion effects</subject><subject>Corrosion resistance</subject><subject>Corrosion tests</subject><subject>Grain boundaries</subject><subject>Heat treatment</subject><subject>Material properties</subject><subject>Powder beds</subject><subject>Powder metallurgy</subject><subject>Titanium alloys</subject><subject>Titanium base alloys</subject><issn>1047-4838</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2024</creationdate><recordtype>article</recordtype><recordid>eNqNjMtuwjAQRb0oUnn0B7qy1LVhUhtiloCCWLKI2KKUTKQgE9OxLZS_ZyLxAWxmju6cuUJ8ZzDPAPJFcM7qXMGvUbBaMvUfYpyByZWx2n6KSQhXYNGss7EIRdPgJUrfyANWUZbE84YdJ53ceSIfWqYj-TtSbDEMZtmq1cYpc2KKVdemm9w45_tBq9MFa_nXy8JxLw2__lEjyS3H-zS0zcSoqVzAr9eeip99Ue4O6k7-P2GI56tP1PHprGFpbQ5r0Po96wlPm0_o</recordid><startdate>20240601</startdate><enddate>20240601</enddate><creator>Huang, Junyuan</creator><creator>Zhang, Wei</creator><creator>Xu, Haiying</creator><creator>Fang, Weiping</creator><general>Springer Nature B.V</general><scope>4T-</scope><scope>4U-</scope><scope>7SR</scope><scope>7TA</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20240601</creationdate><title>Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion</title><author>Huang, Junyuan ; Zhang, Wei ; Xu, Haiying ; Fang, Weiping</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_journals_30588709033</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2024</creationdate><topic>Additive manufacturing</topic><topic>Aerospace industry</topic><topic>Ambient temperature</topic><topic>Chemical vapor deposition</topic><topic>Corrosion currents</topic><topic>Corrosion effects</topic><topic>Corrosion resistance</topic><topic>Corrosion tests</topic><topic>Grain boundaries</topic><topic>Heat treatment</topic><topic>Material properties</topic><topic>Powder beds</topic><topic>Powder metallurgy</topic><topic>Titanium alloys</topic><topic>Titanium base alloys</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Huang, Junyuan</creatorcontrib><creatorcontrib>Zhang, Wei</creatorcontrib><creatorcontrib>Xu, Haiying</creatorcontrib><creatorcontrib>Fang, Weiping</creatorcontrib><collection>Docstoc</collection><collection>University Readers</collection><collection>Engineered Materials Abstracts</collection><collection>Materials Business File</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>JOM (1989)</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Huang, Junyuan</au><au>Zhang, Wei</au><au>Xu, Haiying</au><au>Fang, Weiping</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion</atitle><jtitle>JOM (1989)</jtitle><date>2024-06-01</date><risdate>2024</risdate><volume>76</volume><issue>6</issue><spage>3039</spage><epage>3049</epage><pages>3039-3049</pages><issn>1047-4838</issn><abstract>Electron powder bed fusion (EPBF), as one of the common additive manufacturing techniques, has received increasing attention. EPBF-processed Tİ-6A1-4V is widely used in biomedical and aerospace industries. However, titanium alloys prepared by EPBF have large pores and poor corrosion resistance. Heat treatment is a simple and non-polluting way to improve material properties. However, the effect of heat treatment on the corrosion resistance of EPBF-processed Tİ-6A1-4V alloy has not been thoroughly researched. In this paper, Tİ-6A1-4V samples processed by EPBF were treated with different heat treatment methods. All corrosion tests were performed in 3.5 wt.% NaCl solution at ambient temperature. HT800 has the highest content of ß phase, and the smallest grain boundary density, and therefore has the best corrosion resistance. The corrosion current of HT800 is reduced from 0.109 дА/cm2 unheated to 0.022 ^A/cm2, a reduction of 79.82%.</abstract><cop>New York</cop><pub>Springer Nature B.V</pub><doi>10.1007/sll837-024-06537-y</doi></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1047-4838 |
| ispartof | JOM (1989), 2024-06, Vol.76 (6), p.3039-3049 |
| issn | 1047-4838 |
| language | eng |
| recordid | cdi_proquest_journals_3058870903 |
| source | SpringerLink Journals |
| subjects | Additive manufacturing Aerospace industry Ambient temperature Chemical vapor deposition Corrosion currents Corrosion effects Corrosion resistance Corrosion tests Grain boundaries Heat treatment Material properties Powder beds Powder metallurgy Titanium alloys Titanium base alloys |
| title | Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-06T04%3A21%3A30IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Effect%20of%20Heat%20Treatment%20on%20Corrosion%20Properties%20of%20Ti-6Al-4V%20Titanium%20Alloy%20Produced%20by%20Electron%20Powder%20Bed%20Fusion&rft.jtitle=JOM%20(1989)&rft.au=Huang,%20Junyuan&rft.date=2024-06-01&rft.volume=76&rft.issue=6&rft.spage=3039&rft.epage=3049&rft.pages=3039-3049&rft.issn=1047-4838&rft_id=info:doi/10.1007/sll837-024-06537-y&rft_dat=%3Cproquest%3E3058870903%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=3058870903&rft_id=info:pmid/&rfr_iscdi=true |