The Effect of Braid Angle on Hydraulic Hose Geometry
Hydraulic hoses are part of most hydraulic systems, from industrial hydraulics with open loop hydraulic systems to mobile hydraulics with closed loop hydraulic systems. The design parameters of hydraulic hoses may influence the duty cycle dynamics of these systems. One of the factors that influence...
Gespeichert in:
Veröffentlicht in: | Processes 2024-01, Vol.12 (1), p.152 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | |
---|---|
container_issue | 1 |
container_start_page | 152 |
container_title | Processes |
container_volume | 12 |
creator | Dýrr, Filip Bureček, Adam Hružík, Lumír Polášek, Tomáš Ledvoň, Marian Dvořák, Lukáš |
description | Hydraulic hoses are part of most hydraulic systems, from industrial hydraulics with open loop hydraulic systems to mobile hydraulics with closed loop hydraulic systems. The design parameters of hydraulic hoses may influence the duty cycle dynamics of these systems. One of the factors that influence the behavior of a hydraulic hose under pressure loading is the steel braid angle with respect to the hydraulic hose axis. This work aims to determine the effect of the hydraulic hose braid angle on the change in its geometry. The next objective is to determine the forces that occur at the hose ends under pressure loading. The stresses occur when fluid pressure is applied to the inner wall of the hydraulic hose. Consequently, these stresses are transferred to the hose ends through the steel braid or spiral. The phenomenon of the neutral braid angle provides a balance between the stresses generated inside the hydraulic hose. Therefore, hydraulic hose manufacturers try to produce hydraulic hoses with a neutral braid angle, because the lifetime of the hydraulic hose is also related to this. As part of this research work, an experimental device was constructed in order to measuring the properties of hydraulic hoses. When the hose was loaded with fluid pressure, the change in hose geometry was measured and the angle of the hose braid was measured simultaneously. Upon the measurements, the effect of the braid angle on the hose behavior under pressure loading was determined. |
doi_str_mv | 10.3390/pr12010152 |
format | Article |
fullrecord | <record><control><sourceid>gale_proqu</sourceid><recordid>TN_cdi_proquest_journals_2918795933</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><galeid>A780926207</galeid><sourcerecordid>A780926207</sourcerecordid><originalsourceid>FETCH-LOGICAL-c293t-c4c76333b18820214def68e8033f0c6b6cc9c461df69aafe33900b0617c46b5f3</originalsourceid><addsrcrecordid>eNpNUE1LAzEQDaJgqb34CwLehK352M3HsZbaCgUv9Ryy2Undst3UZHvYf29KBZ05zPCY997MIPRIyZxzTV5OkTJCCa3YDZowxmShJZW3__p7NEvpQHJoylUlJqjcfQFeeQ9uwMHj12jbBi_6fQc49HgzNtGeu9bhTUiA1xCOMMTxAd152yWY_dYp-nxb7ZabYvuxfl8utoVjmg-FK50UnPOaKsUIo2UDXihQhHNPnKiFc9qVgjZeaGs9XI4gNRFUZrSuPJ-ip6vuKYbvM6TBHMI59tnSME2V1JXO8lM0v07tbQem7X0YonU5Gzi2LvTg24wvpCKaCUZkJjxfCS6GlCJ4c4rt0cbRUGIuS5i_T_Ifl49iZw</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2918795933</pqid></control><display><type>article</type><title>The Effect of Braid Angle on Hydraulic Hose Geometry</title><source>MDPI - Multidisciplinary Digital Publishing Institute</source><source>EZB-FREE-00999 freely available EZB journals</source><creator>Dýrr, Filip ; Bureček, Adam ; Hružík, Lumír ; Polášek, Tomáš ; Ledvoň, Marian ; Dvořák, Lukáš</creator><creatorcontrib>Dýrr, Filip ; Bureček, Adam ; Hružík, Lumír ; Polášek, Tomáš ; Ledvoň, Marian ; Dvořák, Lukáš</creatorcontrib><description>Hydraulic hoses are part of most hydraulic systems, from industrial hydraulics with open loop hydraulic systems to mobile hydraulics with closed loop hydraulic systems. The design parameters of hydraulic hoses may influence the duty cycle dynamics of these systems. One of the factors that influence the behavior of a hydraulic hose under pressure loading is the steel braid angle with respect to the hydraulic hose axis. This work aims to determine the effect of the hydraulic hose braid angle on the change in its geometry. The next objective is to determine the forces that occur at the hose ends under pressure loading. The stresses occur when fluid pressure is applied to the inner wall of the hydraulic hose. Consequently, these stresses are transferred to the hose ends through the steel braid or spiral. The phenomenon of the neutral braid angle provides a balance between the stresses generated inside the hydraulic hose. Therefore, hydraulic hose manufacturers try to produce hydraulic hoses with a neutral braid angle, because the lifetime of the hydraulic hose is also related to this. As part of this research work, an experimental device was constructed in order to measuring the properties of hydraulic hoses. When the hose was loaded with fluid pressure, the change in hose geometry was measured and the angle of the hose braid was measured simultaneously. Upon the measurements, the effect of the braid angle on the hose behavior under pressure loading was determined.</description><identifier>ISSN: 2227-9717</identifier><identifier>EISSN: 2227-9717</identifier><identifier>DOI: 10.3390/pr12010152</identifier><language>eng</language><publisher>Basel: MDPI AG</publisher><subject>Braiding ; Closed loops ; Design parameters ; Fluid flow ; Fluid pressure ; Geometry ; Hoses ; Hydraulic equipment ; Hydraulics ; Industrial equipment ; Influence ; Manufacturers ; Manufacturing ; Pressure ; Rubber ; Steel ; Stresses ; Wire</subject><ispartof>Processes, 2024-01, Vol.12 (1), p.152</ispartof><rights>COPYRIGHT 2024 MDPI AG</rights><rights>2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c293t-c4c76333b18820214def68e8033f0c6b6cc9c461df69aafe33900b0617c46b5f3</cites><orcidid>0000-0002-0693-1637 ; 0000-0002-5100-6504 ; 0000-0001-6195-7963</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,27901,27902</link.rule.ids></links><search><creatorcontrib>Dýrr, Filip</creatorcontrib><creatorcontrib>Bureček, Adam</creatorcontrib><creatorcontrib>Hružík, Lumír</creatorcontrib><creatorcontrib>Polášek, Tomáš</creatorcontrib><creatorcontrib>Ledvoň, Marian</creatorcontrib><creatorcontrib>Dvořák, Lukáš</creatorcontrib><title>The Effect of Braid Angle on Hydraulic Hose Geometry</title><title>Processes</title><description>Hydraulic hoses are part of most hydraulic systems, from industrial hydraulics with open loop hydraulic systems to mobile hydraulics with closed loop hydraulic systems. The design parameters of hydraulic hoses may influence the duty cycle dynamics of these systems. One of the factors that influence the behavior of a hydraulic hose under pressure loading is the steel braid angle with respect to the hydraulic hose axis. This work aims to determine the effect of the hydraulic hose braid angle on the change in its geometry. The next objective is to determine the forces that occur at the hose ends under pressure loading. The stresses occur when fluid pressure is applied to the inner wall of the hydraulic hose. Consequently, these stresses are transferred to the hose ends through the steel braid or spiral. The phenomenon of the neutral braid angle provides a balance between the stresses generated inside the hydraulic hose. Therefore, hydraulic hose manufacturers try to produce hydraulic hoses with a neutral braid angle, because the lifetime of the hydraulic hose is also related to this. As part of this research work, an experimental device was constructed in order to measuring the properties of hydraulic hoses. When the hose was loaded with fluid pressure, the change in hose geometry was measured and the angle of the hose braid was measured simultaneously. Upon the measurements, the effect of the braid angle on the hose behavior under pressure loading was determined.</description><subject>Braiding</subject><subject>Closed loops</subject><subject>Design parameters</subject><subject>Fluid flow</subject><subject>Fluid pressure</subject><subject>Geometry</subject><subject>Hoses</subject><subject>Hydraulic equipment</subject><subject>Hydraulics</subject><subject>Industrial equipment</subject><subject>Influence</subject><subject>Manufacturers</subject><subject>Manufacturing</subject><subject>Pressure</subject><subject>Rubber</subject><subject>Steel</subject><subject>Stresses</subject><subject>Wire</subject><issn>2227-9717</issn><issn>2227-9717</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2024</creationdate><recordtype>article</recordtype><sourceid>BENPR</sourceid><recordid>eNpNUE1LAzEQDaJgqb34CwLehK352M3HsZbaCgUv9Ryy2Undst3UZHvYf29KBZ05zPCY997MIPRIyZxzTV5OkTJCCa3YDZowxmShJZW3__p7NEvpQHJoylUlJqjcfQFeeQ9uwMHj12jbBi_6fQc49HgzNtGeu9bhTUiA1xCOMMTxAd152yWY_dYp-nxb7ZabYvuxfl8utoVjmg-FK50UnPOaKsUIo2UDXihQhHNPnKiFc9qVgjZeaGs9XI4gNRFUZrSuPJ-ip6vuKYbvM6TBHMI59tnSME2V1JXO8lM0v07tbQem7X0YonU5Gzi2LvTg24wvpCKaCUZkJjxfCS6GlCJ4c4rt0cbRUGIuS5i_T_Ifl49iZw</recordid><startdate>20240101</startdate><enddate>20240101</enddate><creator>Dýrr, Filip</creator><creator>Bureček, Adam</creator><creator>Hružík, Lumír</creator><creator>Polášek, Tomáš</creator><creator>Ledvoň, Marian</creator><creator>Dvořák, Lukáš</creator><general>MDPI AG</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8FD</scope><scope>8FE</scope><scope>8FG</scope><scope>8FH</scope><scope>ABJCF</scope><scope>ABUWG</scope><scope>AFKRA</scope><scope>AZQEC</scope><scope>BBNVY</scope><scope>BENPR</scope><scope>BGLVJ</scope><scope>BHPHI</scope><scope>CCPQU</scope><scope>D1I</scope><scope>DWQXO</scope><scope>GNUQQ</scope><scope>HCIFZ</scope><scope>JG9</scope><scope>KB.</scope><scope>LK8</scope><scope>M7P</scope><scope>PDBOC</scope><scope>PIMPY</scope><scope>PQEST</scope><scope>PQQKQ</scope><scope>PQUKI</scope><orcidid>https://orcid.org/0000-0002-0693-1637</orcidid><orcidid>https://orcid.org/0000-0002-5100-6504</orcidid><orcidid>https://orcid.org/0000-0001-6195-7963</orcidid></search><sort><creationdate>20240101</creationdate><title>The Effect of Braid Angle on Hydraulic Hose Geometry</title><author>Dýrr, Filip ; Bureček, Adam ; Hružík, Lumír ; Polášek, Tomáš ; Ledvoň, Marian ; Dvořák, Lukáš</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c293t-c4c76333b18820214def68e8033f0c6b6cc9c461df69aafe33900b0617c46b5f3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2024</creationdate><topic>Braiding</topic><topic>Closed loops</topic><topic>Design parameters</topic><topic>Fluid flow</topic><topic>Fluid pressure</topic><topic>Geometry</topic><topic>Hoses</topic><topic>Hydraulic equipment</topic><topic>Hydraulics</topic><topic>Industrial equipment</topic><topic>Influence</topic><topic>Manufacturers</topic><topic>Manufacturing</topic><topic>Pressure</topic><topic>Rubber</topic><topic>Steel</topic><topic>Stresses</topic><topic>Wire</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Dýrr, Filip</creatorcontrib><creatorcontrib>Bureček, Adam</creatorcontrib><creatorcontrib>Hružík, Lumír</creatorcontrib><creatorcontrib>Polášek, Tomáš</creatorcontrib><creatorcontrib>Ledvoň, Marian</creatorcontrib><creatorcontrib>Dvořák, Lukáš</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>ProQuest SciTech Collection</collection><collection>ProQuest Technology Collection</collection><collection>ProQuest Natural Science Collection</collection><collection>Materials Science & Engineering Collection</collection><collection>ProQuest Central (Alumni Edition)</collection><collection>ProQuest Central UK/Ireland</collection><collection>ProQuest Central Essentials</collection><collection>Biological Science Collection</collection><collection>ProQuest Central</collection><collection>Technology Collection</collection><collection>Natural Science Collection</collection><collection>ProQuest One Community College</collection><collection>ProQuest Materials Science Collection</collection><collection>ProQuest Central Korea</collection><collection>ProQuest Central Student</collection><collection>SciTech Premium Collection</collection><collection>Materials Research Database</collection><collection>Materials Science Database</collection><collection>ProQuest Biological Science Collection</collection><collection>Biological Science Database</collection><collection>Materials Science Collection</collection><collection>Publicly Available Content Database</collection><collection>ProQuest One Academic Eastern Edition (DO NOT USE)</collection><collection>ProQuest One Academic</collection><collection>ProQuest One Academic UKI Edition</collection><jtitle>Processes</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Dýrr, Filip</au><au>Bureček, Adam</au><au>Hružík, Lumír</au><au>Polášek, Tomáš</au><au>Ledvoň, Marian</au><au>Dvořák, Lukáš</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>The Effect of Braid Angle on Hydraulic Hose Geometry</atitle><jtitle>Processes</jtitle><date>2024-01-01</date><risdate>2024</risdate><volume>12</volume><issue>1</issue><spage>152</spage><pages>152-</pages><issn>2227-9717</issn><eissn>2227-9717</eissn><abstract>Hydraulic hoses are part of most hydraulic systems, from industrial hydraulics with open loop hydraulic systems to mobile hydraulics with closed loop hydraulic systems. The design parameters of hydraulic hoses may influence the duty cycle dynamics of these systems. One of the factors that influence the behavior of a hydraulic hose under pressure loading is the steel braid angle with respect to the hydraulic hose axis. This work aims to determine the effect of the hydraulic hose braid angle on the change in its geometry. The next objective is to determine the forces that occur at the hose ends under pressure loading. The stresses occur when fluid pressure is applied to the inner wall of the hydraulic hose. Consequently, these stresses are transferred to the hose ends through the steel braid or spiral. The phenomenon of the neutral braid angle provides a balance between the stresses generated inside the hydraulic hose. Therefore, hydraulic hose manufacturers try to produce hydraulic hoses with a neutral braid angle, because the lifetime of the hydraulic hose is also related to this. As part of this research work, an experimental device was constructed in order to measuring the properties of hydraulic hoses. When the hose was loaded with fluid pressure, the change in hose geometry was measured and the angle of the hose braid was measured simultaneously. Upon the measurements, the effect of the braid angle on the hose behavior under pressure loading was determined.</abstract><cop>Basel</cop><pub>MDPI AG</pub><doi>10.3390/pr12010152</doi><orcidid>https://orcid.org/0000-0002-0693-1637</orcidid><orcidid>https://orcid.org/0000-0002-5100-6504</orcidid><orcidid>https://orcid.org/0000-0001-6195-7963</orcidid><oa>free_for_read</oa></addata></record> |
fulltext | fulltext |
identifier | ISSN: 2227-9717 |
ispartof | Processes, 2024-01, Vol.12 (1), p.152 |
issn | 2227-9717 2227-9717 |
language | eng |
recordid | cdi_proquest_journals_2918795933 |
source | MDPI - Multidisciplinary Digital Publishing Institute; EZB-FREE-00999 freely available EZB journals |
subjects | Braiding Closed loops Design parameters Fluid flow Fluid pressure Geometry Hoses Hydraulic equipment Hydraulics Industrial equipment Influence Manufacturers Manufacturing Pressure Rubber Steel Stresses Wire |
title | The Effect of Braid Angle on Hydraulic Hose Geometry |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-31T20%3A54%3A48IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-gale_proqu&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=The%20Effect%20of%20Braid%20Angle%20on%20Hydraulic%20Hose%20Geometry&rft.jtitle=Processes&rft.au=D%C3%BDrr,%20Filip&rft.date=2024-01-01&rft.volume=12&rft.issue=1&rft.spage=152&rft.pages=152-&rft.issn=2227-9717&rft.eissn=2227-9717&rft_id=info:doi/10.3390/pr12010152&rft_dat=%3Cgale_proqu%3EA780926207%3C/gale_proqu%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2918795933&rft_id=info:pmid/&rft_galeid=A780926207&rfr_iscdi=true |