Adsorption Behavior and Adsorption Dynamics of Micrometer-Sized Polymer Microspheres on the Surface of Quartz Sand

The adsorption of polymer microspheres in a stratum can directly affect its action mode and performance in the actual application process. Understanding the adsorption pattern of polymer microspheres and their adsorption mechanism can facilitate optimization of the application mode and enhance the u...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Processes 2023-05, Vol.11 (5), p.1432
Hauptverfasser: Li, Jun, Luo, Taotao, Yan, Wende, Cheng, Tingting, Cheng, Keyang, Yu, Lu, Cao, Jiannan, Yang, Zhongquan
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The adsorption of polymer microspheres in a stratum can directly affect its action mode and performance in the actual application process. Understanding the adsorption pattern of polymer microspheres and their adsorption mechanism can facilitate optimization of the application mode and enhance the use efficiency. Ultraviolet spectrophotometry was employed to measure the static adsorption characteristics of polymer microspheres (PMS) on the surface of quartz sand. The PMS adsorption capacity on the surface of quartz sand increased with increasing concentration. When the concentration was 1000 mg/L, the static equilibrium adsorption capacity was 402 μg/g, and monolayer adsorption was dominant. The effect of the contact time on the adsorption was investigated, and the fitting was performed using the isothermal adsorption thermodynamic equilibrium model and the adsorption kinetic model. The adsorption of 800 mg/L PMS tended to equilibrate after 0.8 h of adsorption on the surface of quartz sand, and the adsorption of 1400 mg/L PMS tended to equilibrate after 1 h of adsorption on the surface of quartz sand. Good fitting results of the kinetic adsorption process were obtained using the pseudo-first-order (PFO) model, pseudo-second-order (PSO) model, Elovich model, and mixed-order (MO) model. The effects of the temperature, particle size of the quartz sand, solid–liquid ratio, and salinity on the adsorption of PMS on the surface of quartz sand were examined. The PMS adsorption capacity on the surface of quartz sand decreased with increasing environmental temperature. The adsorption of PMS at the solid–liquid interface was an exothermic process, and the enthalpy of adsorption was negative. As the mass of the quartz sand in the solid–liquid ratio increased, the adsorption capacity decreased; a low salinity and neutral pH were conducive to the adsorption of PMS on the surface of quartz sand.
ISSN:2227-9717
2227-9717
DOI:10.3390/pr11051432