Experimental Study on the Axial Compression Performance of Glued Wood Hollow Cylinders Reinforced with BFRP

The present paper investigates the impact of basalt fiber reinforced polymer (BFRP) on the axial compression performance of glued wood hollow cylinders. This study aims to facilitate the application of BFRP in the field of structural reinforcement of glued wood hollow columns. Ten glued laminated wood hollow columns of the same size were designed and placed into five groups (ZC1 and ZRC2 to ZRC5), of which one group (ZC1), with a total of two pure wooden columns, was not arranged with BFRP, and the remaining two wooden columns in each group were arranged with BFRP at different distances. The destruction mode, ultimate load capacity, load–displacement curve, load–strain curve, and ultimate load capacity–total area of the BFRP paste curve of each specimen were obtained by conducting axial compression tests on five groups of wood columns reinforced with different basalt fiber cloths, which revealed the damage mechanism, the relationship between the ultimate load capacity and total area of BFRP paste, and pointed out the most effective area ratio. The test results show that the destruction mode of axially pressed, glued, laminated wood hollow columns is typical compression buckling damage, mainly manifested as follows: the wood at the middle or end of the specimen under pressure first buckles; then, with the increase in load, the specimen is crushed; at this time, the maximum ultimate bearing capacity of each specimen is in the range of 296.77~375.85 kN, the maximum longitudinal displacement is in the range of 2.77~3.38 mm, and longitudinal cracks appear at the end. It is worth noting that the growth rate of the ultimate bearing capacity varies with the increase in the total area of the BFRP paste. When the total area of the BFRP paste is less than a 3.2 × 105 mm2 range value, the growth rate of the ultimate bearing capacity is faster, and then, the growth rate gradually becomes slower. The optimum BFRP paste area ratio can be taken as k = 0.59. The ultimate bearing capacity after reinforcement increases from 11.06% to 26.65% compared with the pure wood column. According to GB50005-2017, “wood structure design standards” improve the hollow wood column bearing capacity calculation method and fit the BFRP reinforced hollow wood column’s ultimate bearing capacity calculation formula; the errors are within ±10%, which can provide a reference for the practical application of BFRP in the field of reinforcing glued wood hollow cylindrical structures.