Investigation on the thermo-mechanical properties of hot stamped parts by using laser-implanted tool surfaces

In the automotive industry, hot stamping has been established as a key technology for manufacturing safety-related car body components with high strength-to-weight ratio. During the forming operation, however, hot stamping tools are highly stressed by cyclic thermo-mechanical loads, which encourage the formation of severe wear and high friction at the blank-die interface. Against this background, an innovative surface engineering technology named laser implantation has been investigated for improving the formability of the parts and the efficiency of the hot stamping process. The laser implantation process is based on the generation of highly wear resistant microfeatures on tool surfaces by embedding hard ceramic particles via pulsed laser radiation. As a consequence, the contact area of the tool and thus the tribological and thermal interactions at the blank-die interface are locally influenced. In previous studies, the improved tribological performance of the modified tool surfaces has already been proven. However, the thermal interactions between tool and workpiece have not been analyzed, which in turn have a significant impact on the resulting part properties. In this regard, quenching tests have been carried out under hot stamping conditions by using conventional as well as laser-implanted tooling systems. Based on these results, Vickers hardness test and optical measurements have been performed on the quenched blanks, to qualify the mechanical properties and clarify the cause-effect relations.