Role of surface defects and anisotropy variation on magnetic properties of copper ferrite nanoparticles prepared by co-precipitation method

Nanocrystalline Cu-ferrite samples were synthesized by co-precipitation method at two different pH. The samples were annealed at various temperatures ranging from 400 to 1000 °C in air for 3 h. Tetragonal Cu-ferrite was observed for the sample prepared at pH = 10.9, whereas the sample prepared at pH...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Materials chemistry and physics 2022-07, Vol.286, p.126212, Article 126212
Hauptverfasser: Subha, A., Shalini, M.G., Sahu, B.N., Rout, S., Sahoo, Subasa C.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue
container_start_page 126212
container_title Materials chemistry and physics
container_volume 286
creator Subha, A.
Shalini, M.G.
Sahu, B.N.
Rout, S.
Sahoo, Subasa C.
description Nanocrystalline Cu-ferrite samples were synthesized by co-precipitation method at two different pH. The samples were annealed at various temperatures ranging from 400 to 1000 °C in air for 3 h. Tetragonal Cu-ferrite was observed for the sample prepared at pH = 10.9, whereas the sample prepared at pH = 10.3 showed cubic Cu-ferrite, after annealing at 1000 °C. The average grain sizes were found to be 13 and 19 nm for the as prepared samples synthesized at pH = 10.3 and pH = 10.9 respectively, which was increased with the increase in annealing temperature. Spontaneous magnetization values increased with the decrease in surface defects, whereas coercivity and remanence ratio showed peaks with increase in annealing temperature. The highest magnetic moments of 1.6μB and 2.1μB per molecule were observed at 60K for the tetragonal and cubic Cu-ferrite samples respectively. The highest anisotropy constant (K) of 4.98 × 103 and 16.0 × 103 J/m3 was observed at 60K for the sample prepared at pH = 10.3 and pH = 10.9 respectively. The nonsaturation parameter varies similarly with coercivity and anisotropy constant in these nanoparticle samples. The structural transformation, decrease in surface defects, and anisotropy variation with increasing annealing temperature and grain growth explains the observed magnetic properties. [Display omitted] •Cu-ferrite nanoparticle samples were synthesized by co-precipitation method at pH of 10.3 and 10.9 and were annealed.•Depending on pH of the solution different phases of Cu-ferrite were observed at higher annealing temperature of 1000 °C.•Formation of different phases influence the magnetic properties.•Nonsaturation of magnetic hysteresis loop decreases with the decrease in surface defects and anisotropy.•PH of the solution during synthesis and subsequent annealing tune the magnetic properties.
doi_str_mv 10.1016/j.matchemphys.2022.126212
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2693932576</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0254058422005181</els_id><sourcerecordid>2693932576</sourcerecordid><originalsourceid>FETCH-LOGICAL-c349t-ce0a37ba4148acf785366572776b08964f7bd9d9a3f48688013cc3afbdd1d58d3</originalsourceid><addsrcrecordid>eNqNUF1r3DAQFKGBXJP8B4U--6oPW5Ify9E2hYNAaJ-FLK1yOs6WI-kO_Bv6p6vDfehjYcUyzOysdhB6omRLCRWfj9vRFHuAcT4secsIY1vKBKPsBm2okn3DOWUf0Iawrm1Ip9o79DHnIyFUUso36PdrPAGOHudz8sYCduDBlozN5OoLOZYU5wVfTAqmhDjhWqN5m6AEi-fKQSoB8tXCxrki7CGlUABPZoqzqaw9VX5OUAE4PCxV2FRowxzK6jlCOUT3gG69OWV4_Nvv0a9vX3_unpv9y_cfuy_7xvK2L40FYrgcTEtbZayXquNCdJJJKQaietF6Obje9Yb7VgmlCOXWcuMH56jrlOP36NPqW7__foZc9DGe01RXaiZ63nPWSVFV_aqyKeacwOs5hdGkRVOir9nro_4ne33NXq_Z19ndOgv1jEuApLMNMFlwod5dtIvhP1z-ANcSlyU</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2693932576</pqid></control><display><type>article</type><title>Role of surface defects and anisotropy variation on magnetic properties of copper ferrite nanoparticles prepared by co-precipitation method</title><source>Access via ScienceDirect (Elsevier)</source><creator>Subha, A. ; Shalini, M.G. ; Sahu, B.N. ; Rout, S. ; Sahoo, Subasa C.</creator><creatorcontrib>Subha, A. ; Shalini, M.G. ; Sahu, B.N. ; Rout, S. ; Sahoo, Subasa C.</creatorcontrib><description>Nanocrystalline Cu-ferrite samples were synthesized by co-precipitation method at two different pH. The samples were annealed at various temperatures ranging from 400 to 1000 °C in air for 3 h. Tetragonal Cu-ferrite was observed for the sample prepared at pH = 10.9, whereas the sample prepared at pH = 10.3 showed cubic Cu-ferrite, after annealing at 1000 °C. The average grain sizes were found to be 13 and 19 nm for the as prepared samples synthesized at pH = 10.3 and pH = 10.9 respectively, which was increased with the increase in annealing temperature. Spontaneous magnetization values increased with the decrease in surface defects, whereas coercivity and remanence ratio showed peaks with increase in annealing temperature. The highest magnetic moments of 1.6μB and 2.1μB per molecule were observed at 60K for the tetragonal and cubic Cu-ferrite samples respectively. The highest anisotropy constant (K) of 4.98 × 103 and 16.0 × 103 J/m3 was observed at 60K for the sample prepared at pH = 10.3 and pH = 10.9 respectively. The nonsaturation parameter varies similarly with coercivity and anisotropy constant in these nanoparticle samples. The structural transformation, decrease in surface defects, and anisotropy variation with increasing annealing temperature and grain growth explains the observed magnetic properties. [Display omitted] •Cu-ferrite nanoparticle samples were synthesized by co-precipitation method at pH of 10.3 and 10.9 and were annealed.•Depending on pH of the solution different phases of Cu-ferrite were observed at higher annealing temperature of 1000 °C.•Formation of different phases influence the magnetic properties.•Nonsaturation of magnetic hysteresis loop decreases with the decrease in surface defects and anisotropy.•PH of the solution during synthesis and subsequent annealing tune the magnetic properties.</description><identifier>ISSN: 0254-0584</identifier><identifier>EISSN: 1879-3312</identifier><identifier>DOI: 10.1016/j.matchemphys.2022.126212</identifier><language>eng</language><publisher>Lausanne: Elsevier B.V</publisher><subject>Anisotropy ; Annealing ; Co-precipitation ; Coercivity ; Copper ; Copper ferrite ; Coprecipitation ; Crystal defects ; Defect annealing ; Grain growth ; Grain size ; Magnetic hysteresis loop ; Magnetic moments ; Magnetic properties ; Magnetism ; Nanoparticles ; Remanence ; Structural change ; Surface defects ; Synthesis ; Temperature</subject><ispartof>Materials chemistry and physics, 2022-07, Vol.286, p.126212, Article 126212</ispartof><rights>2022 Elsevier B.V.</rights><rights>Copyright Elsevier BV Jul 1, 2022</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c349t-ce0a37ba4148acf785366572776b08964f7bd9d9a3f48688013cc3afbdd1d58d3</citedby><cites>FETCH-LOGICAL-c349t-ce0a37ba4148acf785366572776b08964f7bd9d9a3f48688013cc3afbdd1d58d3</cites><orcidid>0000-0002-8208-9189</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.matchemphys.2022.126212$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids></links><search><creatorcontrib>Subha, A.</creatorcontrib><creatorcontrib>Shalini, M.G.</creatorcontrib><creatorcontrib>Sahu, B.N.</creatorcontrib><creatorcontrib>Rout, S.</creatorcontrib><creatorcontrib>Sahoo, Subasa C.</creatorcontrib><title>Role of surface defects and anisotropy variation on magnetic properties of copper ferrite nanoparticles prepared by co-precipitation method</title><title>Materials chemistry and physics</title><description>Nanocrystalline Cu-ferrite samples were synthesized by co-precipitation method at two different pH. The samples were annealed at various temperatures ranging from 400 to 1000 °C in air for 3 h. Tetragonal Cu-ferrite was observed for the sample prepared at pH = 10.9, whereas the sample prepared at pH = 10.3 showed cubic Cu-ferrite, after annealing at 1000 °C. The average grain sizes were found to be 13 and 19 nm for the as prepared samples synthesized at pH = 10.3 and pH = 10.9 respectively, which was increased with the increase in annealing temperature. Spontaneous magnetization values increased with the decrease in surface defects, whereas coercivity and remanence ratio showed peaks with increase in annealing temperature. The highest magnetic moments of 1.6μB and 2.1μB per molecule were observed at 60K for the tetragonal and cubic Cu-ferrite samples respectively. The highest anisotropy constant (K) of 4.98 × 103 and 16.0 × 103 J/m3 was observed at 60K for the sample prepared at pH = 10.3 and pH = 10.9 respectively. The nonsaturation parameter varies similarly with coercivity and anisotropy constant in these nanoparticle samples. The structural transformation, decrease in surface defects, and anisotropy variation with increasing annealing temperature and grain growth explains the observed magnetic properties. [Display omitted] •Cu-ferrite nanoparticle samples were synthesized by co-precipitation method at pH of 10.3 and 10.9 and were annealed.•Depending on pH of the solution different phases of Cu-ferrite were observed at higher annealing temperature of 1000 °C.•Formation of different phases influence the magnetic properties.•Nonsaturation of magnetic hysteresis loop decreases with the decrease in surface defects and anisotropy.•PH of the solution during synthesis and subsequent annealing tune the magnetic properties.</description><subject>Anisotropy</subject><subject>Annealing</subject><subject>Co-precipitation</subject><subject>Coercivity</subject><subject>Copper</subject><subject>Copper ferrite</subject><subject>Coprecipitation</subject><subject>Crystal defects</subject><subject>Defect annealing</subject><subject>Grain growth</subject><subject>Grain size</subject><subject>Magnetic hysteresis loop</subject><subject>Magnetic moments</subject><subject>Magnetic properties</subject><subject>Magnetism</subject><subject>Nanoparticles</subject><subject>Remanence</subject><subject>Structural change</subject><subject>Surface defects</subject><subject>Synthesis</subject><subject>Temperature</subject><issn>0254-0584</issn><issn>1879-3312</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2022</creationdate><recordtype>article</recordtype><recordid>eNqNUF1r3DAQFKGBXJP8B4U--6oPW5Ify9E2hYNAaJ-FLK1yOs6WI-kO_Bv6p6vDfehjYcUyzOysdhB6omRLCRWfj9vRFHuAcT4secsIY1vKBKPsBm2okn3DOWUf0Iawrm1Ip9o79DHnIyFUUso36PdrPAGOHudz8sYCduDBlozN5OoLOZYU5wVfTAqmhDjhWqN5m6AEi-fKQSoB8tXCxrki7CGlUABPZoqzqaw9VX5OUAE4PCxV2FRowxzK6jlCOUT3gG69OWV4_Nvv0a9vX3_unpv9y_cfuy_7xvK2L40FYrgcTEtbZayXquNCdJJJKQaietF6Obje9Yb7VgmlCOXWcuMH56jrlOP36NPqW7__foZc9DGe01RXaiZ63nPWSVFV_aqyKeacwOs5hdGkRVOir9nro_4ne33NXq_Z19ndOgv1jEuApLMNMFlwod5dtIvhP1z-ANcSlyU</recordid><startdate>20220701</startdate><enddate>20220701</enddate><creator>Subha, A.</creator><creator>Shalini, M.G.</creator><creator>Sahu, B.N.</creator><creator>Rout, S.</creator><creator>Sahoo, Subasa C.</creator><general>Elsevier B.V</general><general>Elsevier BV</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>7U5</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope><scope>L7M</scope><orcidid>https://orcid.org/0000-0002-8208-9189</orcidid></search><sort><creationdate>20220701</creationdate><title>Role of surface defects and anisotropy variation on magnetic properties of copper ferrite nanoparticles prepared by co-precipitation method</title><author>Subha, A. ; Shalini, M.G. ; Sahu, B.N. ; Rout, S. ; Sahoo, Subasa C.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c349t-ce0a37ba4148acf785366572776b08964f7bd9d9a3f48688013cc3afbdd1d58d3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2022</creationdate><topic>Anisotropy</topic><topic>Annealing</topic><topic>Co-precipitation</topic><topic>Coercivity</topic><topic>Copper</topic><topic>Copper ferrite</topic><topic>Coprecipitation</topic><topic>Crystal defects</topic><topic>Defect annealing</topic><topic>Grain growth</topic><topic>Grain size</topic><topic>Magnetic hysteresis loop</topic><topic>Magnetic moments</topic><topic>Magnetic properties</topic><topic>Magnetism</topic><topic>Nanoparticles</topic><topic>Remanence</topic><topic>Structural change</topic><topic>Surface defects</topic><topic>Synthesis</topic><topic>Temperature</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Subha, A.</creatorcontrib><creatorcontrib>Shalini, M.G.</creatorcontrib><creatorcontrib>Sahu, B.N.</creatorcontrib><creatorcontrib>Rout, S.</creatorcontrib><creatorcontrib>Sahoo, Subasa C.</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Materials chemistry and physics</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Subha, A.</au><au>Shalini, M.G.</au><au>Sahu, B.N.</au><au>Rout, S.</au><au>Sahoo, Subasa C.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Role of surface defects and anisotropy variation on magnetic properties of copper ferrite nanoparticles prepared by co-precipitation method</atitle><jtitle>Materials chemistry and physics</jtitle><date>2022-07-01</date><risdate>2022</risdate><volume>286</volume><spage>126212</spage><pages>126212-</pages><artnum>126212</artnum><issn>0254-0584</issn><eissn>1879-3312</eissn><abstract>Nanocrystalline Cu-ferrite samples were synthesized by co-precipitation method at two different pH. The samples were annealed at various temperatures ranging from 400 to 1000 °C in air for 3 h. Tetragonal Cu-ferrite was observed for the sample prepared at pH = 10.9, whereas the sample prepared at pH = 10.3 showed cubic Cu-ferrite, after annealing at 1000 °C. The average grain sizes were found to be 13 and 19 nm for the as prepared samples synthesized at pH = 10.3 and pH = 10.9 respectively, which was increased with the increase in annealing temperature. Spontaneous magnetization values increased with the decrease in surface defects, whereas coercivity and remanence ratio showed peaks with increase in annealing temperature. The highest magnetic moments of 1.6μB and 2.1μB per molecule were observed at 60K for the tetragonal and cubic Cu-ferrite samples respectively. The highest anisotropy constant (K) of 4.98 × 103 and 16.0 × 103 J/m3 was observed at 60K for the sample prepared at pH = 10.3 and pH = 10.9 respectively. The nonsaturation parameter varies similarly with coercivity and anisotropy constant in these nanoparticle samples. The structural transformation, decrease in surface defects, and anisotropy variation with increasing annealing temperature and grain growth explains the observed magnetic properties. [Display omitted] •Cu-ferrite nanoparticle samples were synthesized by co-precipitation method at pH of 10.3 and 10.9 and were annealed.•Depending on pH of the solution different phases of Cu-ferrite were observed at higher annealing temperature of 1000 °C.•Formation of different phases influence the magnetic properties.•Nonsaturation of magnetic hysteresis loop decreases with the decrease in surface defects and anisotropy.•PH of the solution during synthesis and subsequent annealing tune the magnetic properties.</abstract><cop>Lausanne</cop><pub>Elsevier B.V</pub><doi>10.1016/j.matchemphys.2022.126212</doi><orcidid>https://orcid.org/0000-0002-8208-9189</orcidid></addata></record>
fulltext fulltext
identifier ISSN: 0254-0584
ispartof Materials chemistry and physics, 2022-07, Vol.286, p.126212, Article 126212
issn 0254-0584
1879-3312
language eng
recordid cdi_proquest_journals_2693932576
source Access via ScienceDirect (Elsevier)
subjects Anisotropy
Annealing
Co-precipitation
Coercivity
Copper
Copper ferrite
Coprecipitation
Crystal defects
Defect annealing
Grain growth
Grain size
Magnetic hysteresis loop
Magnetic moments
Magnetic properties
Magnetism
Nanoparticles
Remanence
Structural change
Surface defects
Synthesis
Temperature
title Role of surface defects and anisotropy variation on magnetic properties of copper ferrite nanoparticles prepared by co-precipitation method
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T15%3A15%3A18IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Role%20of%20surface%20defects%20and%20anisotropy%20variation%20on%20magnetic%20properties%20of%20copper%20ferrite%20nanoparticles%20prepared%20by%20co-precipitation%20method&rft.jtitle=Materials%20chemistry%20and%20physics&rft.au=Subha,%20A.&rft.date=2022-07-01&rft.volume=286&rft.spage=126212&rft.pages=126212-&rft.artnum=126212&rft.issn=0254-0584&rft.eissn=1879-3312&rft_id=info:doi/10.1016/j.matchemphys.2022.126212&rft_dat=%3Cproquest_cross%3E2693932576%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2693932576&rft_id=info:pmid/&rft_els_id=S0254058422005181&rfr_iscdi=true