The Ariel Instrument Control Unit

Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey mission (Tinetti 2019; Puig et al. 2018; Pascale et al. 2018), has been selected in March 2018 by ESA for the fourth medium-class mission (M4) launch opportunity of the Cosmic Vision Program, with an expected lift off in late 2028. It is the first mission dedicated to measuring the chemical composition and thermal structures of the atmospheres of hundreds of transiting exoplanets, enabling planetary science far beyond the boundaries of our own Solar System. Its Payload (P/L) (Eccleston and Tinetti 2018; Eccleston et al. 2017; Middleton et al. 2019), has been designed to perform transit spectroscopy from space during primary and secondary planetary eclipses in order to achieve a large unbiased survey concerning the nature of exoplanets atmospheres and their interiors, to determine the key factors affecting the formation and evolution of planetary systems (Tinetti et al. 2017, 2018). Ariel will observe hundreds of warm and hot transiting gas giants, Neptunes and super-Earths around a wide range of host star types, targeting planets hotter than ∼600 K to take advantage of their well-mixed atmospheres. It will exploit primary and secondary transit spectroscopy in the 1.10 to 7.80 μm spectral range and broad-band photometry in the optical (0.50 - 0.80 μm) and Near IR (0.80 - 1.10 μm) . One of the two instruments of the Ariel Payload is the Fine Guidance System (FGS), including three photometric channels (two used for guiding as well as science) between 0.5-1.1 μm plus a low resolution NIR spectrometer for 1.1-1.95 μm range. Along with FGS an IR Spectrometer (AIRS) (Amiaux et al. 2017) is foreseen, providing low-resolution spectroscopy in two IR channels: Channel 0 (CH0) for the 1.95 − 3.90 μm band and Channel 1 (CH1) for the 3.90 − 7.80 μm range. Finally, an Active Cooler System (ACS) including a Ne Joule-Thomson cooler is adopted to provide active cooling capability to the AIRS detectors working at cryogenic temperatures. AIRS is located at the intermediate focal plane of the telescope and common optical system and it hosts two HgCdTe-based hybrid IR detectors and two cold front-end electronics (CFEE) for detectors control and readout. Each CFEE is driven by a Detector Control Unit (DCU) part of AIRS but hosted within and managed by the Instrument Control Unit (ICU) of the Payload (Focardi et al. 2018). ICU is a warm unit residing into the S/C Service Module (SVM) and it is based on a cold r