Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel: Evaluation of the Effect of Cooling Media and Multi-Step Processing on Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel
The effect of friction stir processing on microstructure and mechanical properties of AISI 316 stainless steel was investigated, where characterizations were performed using optical microscopy, field emission scanning electron microscopy, electron backscatter diffraction, X-ray diffraction, atom pro...
Gespeichert in:
| Veröffentlicht in: | Metallography, microstructure, and analysis microstructure, and analysis, 2022, Vol.11 (1), p.72-87 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 87 |
|---|---|
| container_issue | 1 |
| container_start_page | 72 |
| container_title | Metallography, microstructure, and analysis |
| container_volume | 11 |
| creator | Heidarian, Meysam Mostafapoor, Saman |
| description | The effect of friction stir processing on microstructure and mechanical properties of AISI 316 stainless steel was investigated, where characterizations were performed using optical microscopy, field emission scanning electron microscopy, electron backscatter diffraction, X-ray diffraction, atom probe tomography, and micro-hardness and tensile tests. The results revealed dramatically refined grains in the stir zone after applying the method. The application of two-stage processing in the presence of external coolant resulted in the finest grain size of 161 nm. The formation of induced martensite and segregation of alloying elements were observed as a result of processing. Moreover, the formation of martensite was induced up to 39.4 volume percent. Finally, one-step friction stir processing, with external coolant, resulted in enhancing tensile properties. It was shown that extreme grain size refinement, a large fraction of induced martensite along with segregation of alloying elements into the grain boundaries could be the main strengthening reasons.
Graphical abstract |
| doi_str_mv | 10.1007/s13632-021-00815-w |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2645184012</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2645184012</sourcerecordid><originalsourceid>FETCH-LOGICAL-c319t-6e993c63f60d20aef5439baae49c4fa71a3ef568548a2664f63a3cbbee4b0f913</originalsourceid><addsrcrecordid>eNq1kctOwzAQRVMEEqj0B1hZYh3wK27MDlUFKoFAKqwtxxmDUUiK7VDx9ziEx44dK49n7rlj62bZEcEnBOP5aSBMMJpjSnKMS1Lk253sgBJJc0nnePenFnQ_m4XgKowlKymn_GAyuXHGdyH63sTeA9JtjW7APOnWGd2gO99twEcHAXUWXXhnoutatI7ODzMDIUCNzlfrFWJEpL52bZOaqQJoztDyTTe9_mQSH58ALa0FE4fbousa1z6mdbXT4-K-iS5P6ObbfJgn9j8feZjtWd0EmH2d0-zhYnm_uMqvby9Xi_Pr3DAiYy5ASmYEswLXFGuwBWey0hq4NNzqOdEs9URZ8FJTIbgVTDNTVQC8wlYSNs2OR9-N7157CFE9d71v00pFBS9IyTGhSUVH1fDh4MGqjXcv2r8rgtWQthrTVilt9Zm22iaIjVBI4vYR_K_1H9QHlBexJQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2645184012</pqid></control><display><type>article</type><title>Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel: Evaluation of the Effect of Cooling Media and Multi-Step Processing on Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel</title><source>SpringerLink Journals - AutoHoldings</source><creator>Heidarian, Meysam ; Mostafapoor, Saman</creator><creatorcontrib>Heidarian, Meysam ; Mostafapoor, Saman</creatorcontrib><description>The effect of friction stir processing on microstructure and mechanical properties of AISI 316 stainless steel was investigated, where characterizations were performed using optical microscopy, field emission scanning electron microscopy, electron backscatter diffraction, X-ray diffraction, atom probe tomography, and micro-hardness and tensile tests. The results revealed dramatically refined grains in the stir zone after applying the method. The application of two-stage processing in the presence of external coolant resulted in the finest grain size of 161 nm. The formation of induced martensite and segregation of alloying elements were observed as a result of processing. Moreover, the formation of martensite was induced up to 39.4 volume percent. Finally, one-step friction stir processing, with external coolant, resulted in enhancing tensile properties. It was shown that extreme grain size refinement, a large fraction of induced martensite along with segregation of alloying elements into the grain boundaries could be the main strengthening reasons.
Graphical abstract</description><identifier>ISSN: 2192-9262</identifier><identifier>EISSN: 2192-9270</identifier><identifier>DOI: 10.1007/s13632-021-00815-w</identifier><language>eng</language><publisher>New York: Springer US</publisher><subject>Alloying elements ; Austenitic stainless steels ; Characterization and Evaluation of Materials ; Chemistry and Materials Science ; Coolants ; Cooling effects ; Electron backscatter diffraction ; Emission analysis ; Field emission microscopy ; Friction ; Friction stir processing ; Grain boundaries ; Grain size ; Martensite ; Materials Science ; Mechanical properties ; Metallic Materials ; Microhardness ; Microscopy ; Microstructure ; Nanotechnology ; Optical microscopy ; Stainless steel ; Structural Materials ; Surfaces and Interfaces ; Technical Article ; Tensile properties ; Tensile tests ; Thin Films</subject><ispartof>Metallography, microstructure, and analysis, 2022, Vol.11 (1), p.72-87</ispartof><rights>ASM International 2021</rights><rights>ASM International 2021.</rights><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c319t-6e993c63f60d20aef5439baae49c4fa71a3ef568548a2664f63a3cbbee4b0f913</citedby><cites>FETCH-LOGICAL-c319t-6e993c63f60d20aef5439baae49c4fa71a3ef568548a2664f63a3cbbee4b0f913</cites><orcidid>0000-0002-5309-3023</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://link.springer.com/content/pdf/10.1007/s13632-021-00815-w$$EPDF$$P50$$Gspringer$$H</linktopdf><linktohtml>$$Uhttps://link.springer.com/10.1007/s13632-021-00815-w$$EHTML$$P50$$Gspringer$$H</linktohtml><link.rule.ids>314,780,784,27923,27924,41487,42556,51318</link.rule.ids></links><search><creatorcontrib>Heidarian, Meysam</creatorcontrib><creatorcontrib>Mostafapoor, Saman</creatorcontrib><title>Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel: Evaluation of the Effect of Cooling Media and Multi-Step Processing on Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel</title><title>Metallography, microstructure, and analysis</title><addtitle>Metallogr. Microstruct. Anal</addtitle><description>The effect of friction stir processing on microstructure and mechanical properties of AISI 316 stainless steel was investigated, where characterizations were performed using optical microscopy, field emission scanning electron microscopy, electron backscatter diffraction, X-ray diffraction, atom probe tomography, and micro-hardness and tensile tests. The results revealed dramatically refined grains in the stir zone after applying the method. The application of two-stage processing in the presence of external coolant resulted in the finest grain size of 161 nm. The formation of induced martensite and segregation of alloying elements were observed as a result of processing. Moreover, the formation of martensite was induced up to 39.4 volume percent. Finally, one-step friction stir processing, with external coolant, resulted in enhancing tensile properties. It was shown that extreme grain size refinement, a large fraction of induced martensite along with segregation of alloying elements into the grain boundaries could be the main strengthening reasons.
Graphical abstract</description><subject>Alloying elements</subject><subject>Austenitic stainless steels</subject><subject>Characterization and Evaluation of Materials</subject><subject>Chemistry and Materials Science</subject><subject>Coolants</subject><subject>Cooling effects</subject><subject>Electron backscatter diffraction</subject><subject>Emission analysis</subject><subject>Field emission microscopy</subject><subject>Friction</subject><subject>Friction stir processing</subject><subject>Grain boundaries</subject><subject>Grain size</subject><subject>Martensite</subject><subject>Materials Science</subject><subject>Mechanical properties</subject><subject>Metallic Materials</subject><subject>Microhardness</subject><subject>Microscopy</subject><subject>Microstructure</subject><subject>Nanotechnology</subject><subject>Optical microscopy</subject><subject>Stainless steel</subject><subject>Structural Materials</subject><subject>Surfaces and Interfaces</subject><subject>Technical Article</subject><subject>Tensile properties</subject><subject>Tensile tests</subject><subject>Thin Films</subject><issn>2192-9262</issn><issn>2192-9270</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2022</creationdate><recordtype>article</recordtype><recordid>eNq1kctOwzAQRVMEEqj0B1hZYh3wK27MDlUFKoFAKqwtxxmDUUiK7VDx9ziEx44dK49n7rlj62bZEcEnBOP5aSBMMJpjSnKMS1Lk253sgBJJc0nnePenFnQ_m4XgKowlKymn_GAyuXHGdyH63sTeA9JtjW7APOnWGd2gO99twEcHAXUWXXhnoutatI7ODzMDIUCNzlfrFWJEpL52bZOaqQJoztDyTTe9_mQSH58ALa0FE4fbousa1z6mdbXT4-K-iS5P6ObbfJgn9j8feZjtWd0EmH2d0-zhYnm_uMqvby9Xi_Pr3DAiYy5ASmYEswLXFGuwBWey0hq4NNzqOdEs9URZ8FJTIbgVTDNTVQC8wlYSNs2OR9-N7157CFE9d71v00pFBS9IyTGhSUVH1fDh4MGqjXcv2r8rgtWQthrTVilt9Zm22iaIjVBI4vYR_K_1H9QHlBexJQ</recordid><startdate>2022</startdate><enddate>2022</enddate><creator>Heidarian, Meysam</creator><creator>Mostafapoor, Saman</creator><general>Springer US</general><general>Springer Nature B.V</general><scope>AAYXX</scope><scope>CITATION</scope><orcidid>https://orcid.org/0000-0002-5309-3023</orcidid></search><sort><creationdate>2022</creationdate><title>Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel: Evaluation of the Effect of Cooling Media and Multi-Step Processing on Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel</title><author>Heidarian, Meysam ; Mostafapoor, Saman</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c319t-6e993c63f60d20aef5439baae49c4fa71a3ef568548a2664f63a3cbbee4b0f913</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2022</creationdate><topic>Alloying elements</topic><topic>Austenitic stainless steels</topic><topic>Characterization and Evaluation of Materials</topic><topic>Chemistry and Materials Science</topic><topic>Coolants</topic><topic>Cooling effects</topic><topic>Electron backscatter diffraction</topic><topic>Emission analysis</topic><topic>Field emission microscopy</topic><topic>Friction</topic><topic>Friction stir processing</topic><topic>Grain boundaries</topic><topic>Grain size</topic><topic>Martensite</topic><topic>Materials Science</topic><topic>Mechanical properties</topic><topic>Metallic Materials</topic><topic>Microhardness</topic><topic>Microscopy</topic><topic>Microstructure</topic><topic>Nanotechnology</topic><topic>Optical microscopy</topic><topic>Stainless steel</topic><topic>Structural Materials</topic><topic>Surfaces and Interfaces</topic><topic>Technical Article</topic><topic>Tensile properties</topic><topic>Tensile tests</topic><topic>Thin Films</topic><toplevel>online_resources</toplevel><creatorcontrib>Heidarian, Meysam</creatorcontrib><creatorcontrib>Mostafapoor, Saman</creatorcontrib><collection>CrossRef</collection><jtitle>Metallography, microstructure, and analysis</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Heidarian, Meysam</au><au>Mostafapoor, Saman</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel: Evaluation of the Effect of Cooling Media and Multi-Step Processing on Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel</atitle><jtitle>Metallography, microstructure, and analysis</jtitle><stitle>Metallogr. Microstruct. Anal</stitle><date>2022</date><risdate>2022</risdate><volume>11</volume><issue>1</issue><spage>72</spage><epage>87</epage><pages>72-87</pages><issn>2192-9262</issn><eissn>2192-9270</eissn><abstract>The effect of friction stir processing on microstructure and mechanical properties of AISI 316 stainless steel was investigated, where characterizations were performed using optical microscopy, field emission scanning electron microscopy, electron backscatter diffraction, X-ray diffraction, atom probe tomography, and micro-hardness and tensile tests. The results revealed dramatically refined grains in the stir zone after applying the method. The application of two-stage processing in the presence of external coolant resulted in the finest grain size of 161 nm. The formation of induced martensite and segregation of alloying elements were observed as a result of processing. Moreover, the formation of martensite was induced up to 39.4 volume percent. Finally, one-step friction stir processing, with external coolant, resulted in enhancing tensile properties. It was shown that extreme grain size refinement, a large fraction of induced martensite along with segregation of alloying elements into the grain boundaries could be the main strengthening reasons.
Graphical abstract</abstract><cop>New York</cop><pub>Springer US</pub><doi>10.1007/s13632-021-00815-w</doi><tpages>16</tpages><orcidid>https://orcid.org/0000-0002-5309-3023</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 2192-9262 |
| ispartof | Metallography, microstructure, and analysis, 2022, Vol.11 (1), p.72-87 |
| issn | 2192-9262 2192-9270 |
| language | eng |
| recordid | cdi_proquest_journals_2645184012 |
| source | SpringerLink Journals - AutoHoldings |
| subjects | Alloying elements Austenitic stainless steels Characterization and Evaluation of Materials Chemistry and Materials Science Coolants Cooling effects Electron backscatter diffraction Emission analysis Field emission microscopy Friction Friction stir processing Grain boundaries Grain size Martensite Materials Science Mechanical properties Metallic Materials Microhardness Microscopy Microstructure Nanotechnology Optical microscopy Stainless steel Structural Materials Surfaces and Interfaces Technical Article Tensile properties Tensile tests Thin Films |
| title | Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel: Evaluation of the Effect of Cooling Media and Multi-Step Processing on Microstructure and Mechanical Properties of Friction Stir Processed AISI 316 Stainless Steel |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-11T15%3A26%3A40IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Microstructure%20and%20Mechanical%20Properties%20of%20Friction%20Stir%20Processed%20AISI%20316%20Stainless%20Steel:%20Evaluation%20of%20the%20Effect%20of%20Cooling%20Media%20and%20Multi-Step%20Processing%20on%20Microstructure%20and%20Mechanical%20Properties%20of%20Friction%20Stir%20Processed%20AISI%20316%20Stainless%20Steel&rft.jtitle=Metallography,%20microstructure,%20and%20analysis&rft.au=Heidarian,%20Meysam&rft.date=2022&rft.volume=11&rft.issue=1&rft.spage=72&rft.epage=87&rft.pages=72-87&rft.issn=2192-9262&rft.eissn=2192-9270&rft_id=info:doi/10.1007/s13632-021-00815-w&rft_dat=%3Cproquest_cross%3E2645184012%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2645184012&rft_id=info:pmid/&rfr_iscdi=true |