System for Real-time Measurement and Monitoring of Forging Force of Screw-forming Machine
Screws are commonly used fasteners. In general, the term "fastener" refers to machine components comprising screws and bolts used to affix two or more components together. Screw production consists of three steps, namely, heading, threading, and coating. During the forming process, the mol...
Gespeichert in:
| Veröffentlicht in: | Sensors and materials 2021-01, Vol.33 (11), p.3957 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | 11 |
| container_start_page | 3957 |
| container_title | Sensors and materials |
| container_volume | 33 |
| creator | Cheng, Yuan-Ming |
| description | Screws are commonly used fasteners. In general, the term "fastener" refers to machine components comprising screws and bolts used to affix two or more components together. Screw production consists of three steps, namely, heading, threading, and coating. During the forming process, the mold used may be damaged as a result of defects in the metal wire or metal bar. In this study, we employed the CBF-43S screw-forming machine developed by Chun Zu Machinery Industry as the monitoring target and performed kinetic analysis on the slider–crank mechanism of the machine using the provided parameters. Subsequently, the forging force of the machine was measured by a force sensor and its real time changes were recorded. When an error value was identified, the machine was immediately shut down and the mold was inspected for damage. Through this method, the detrimental effect of damaged molds on the quality of screws and bolts can be prevented. |
| doi_str_mv | 10.18494/SAM.2021.3722 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2607327163</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2607327163</sourcerecordid><originalsourceid>FETCH-LOGICAL-c373t-ece738afe52e9ae929f8eba64efc9e2b2ec3b5a11d2bb5aeed3d93e491ac4f2d3</originalsourceid><addsrcrecordid>eNotkN9LwzAUhYMoOOZefS74nJrcpD_yOIZTYUVw-uBTSNOb2bE2M-kQ_3tb59N3ORzOhY-QW85SXkol77fLKgUGPBUFwAWZgRQZZWWuLsmMKS6pVCK7JosY94wxXmYsh3xGPrY_ccAucT4kr2gOdGg7TCo08RSww35ITN8kle_bwYe23yXeJWsfdtM50uIUbG3AbzpOdFNcGfvZ9nhDrpw5RFz8c07e1w9vqye6eXl8Xi031IpCDBQtFqI0DjNAZVCBciXWJpforEKoAa2oM8N5A_VIxEY0SqBU3FjpoBFzcnfePQb_dcI46L0_hX58qSFnhYCC52JspeeWDT7GgE4fQ9uZ8KM5038G9WhQTwb1ZFD8AqAOZMw</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2607327163</pqid></control><display><type>article</type><title>System for Real-time Measurement and Monitoring of Forging Force of Screw-forming Machine</title><source>DOAJ Directory of Open Access Journals</source><source>Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals</source><source>Alma/SFX Local Collection</source><creator>Cheng, Yuan-Ming</creator><creatorcontrib>Cheng, Yuan-Ming</creatorcontrib><description>Screws are commonly used fasteners. In general, the term "fastener" refers to machine components comprising screws and bolts used to affix two or more components together. Screw production consists of three steps, namely, heading, threading, and coating. During the forming process, the mold used may be damaged as a result of defects in the metal wire or metal bar. In this study, we employed the CBF-43S screw-forming machine developed by Chun Zu Machinery Industry as the monitoring target and performed kinetic analysis on the slider–crank mechanism of the machine using the provided parameters. Subsequently, the forging force of the machine was measured by a force sensor and its real time changes were recorded. When an error value was identified, the machine was immediately shut down and the mold was inspected for damage. Through this method, the detrimental effect of damaged molds on the quality of screws and bolts can be prevented.</description><identifier>ISSN: 0914-4935</identifier><identifier>EISSN: 2435-0869</identifier><identifier>DOI: 10.18494/SAM.2021.3722</identifier><language>eng</language><publisher>Tokyo: MYU Scientific Publishing Division</publisher><subject>Bolts ; Damage ; Fasteners ; Forging ; Forming machines ; Molds ; Monitoring ; Real time ; Screws ; Shutdowns ; Time measurement</subject><ispartof>Sensors and materials, 2021-01, Vol.33 (11), p.3957</ispartof><rights>Copyright MYU Scientific Publishing Division 2021</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c373t-ece738afe52e9ae929f8eba64efc9e2b2ec3b5a11d2bb5aeed3d93e491ac4f2d3</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,860,27901,27902</link.rule.ids></links><search><creatorcontrib>Cheng, Yuan-Ming</creatorcontrib><title>System for Real-time Measurement and Monitoring of Forging Force of Screw-forming Machine</title><title>Sensors and materials</title><description>Screws are commonly used fasteners. In general, the term "fastener" refers to machine components comprising screws and bolts used to affix two or more components together. Screw production consists of three steps, namely, heading, threading, and coating. During the forming process, the mold used may be damaged as a result of defects in the metal wire or metal bar. In this study, we employed the CBF-43S screw-forming machine developed by Chun Zu Machinery Industry as the monitoring target and performed kinetic analysis on the slider–crank mechanism of the machine using the provided parameters. Subsequently, the forging force of the machine was measured by a force sensor and its real time changes were recorded. When an error value was identified, the machine was immediately shut down and the mold was inspected for damage. Through this method, the detrimental effect of damaged molds on the quality of screws and bolts can be prevented.</description><subject>Bolts</subject><subject>Damage</subject><subject>Fasteners</subject><subject>Forging</subject><subject>Forming machines</subject><subject>Molds</subject><subject>Monitoring</subject><subject>Real time</subject><subject>Screws</subject><subject>Shutdowns</subject><subject>Time measurement</subject><issn>0914-4935</issn><issn>2435-0869</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2021</creationdate><recordtype>article</recordtype><recordid>eNotkN9LwzAUhYMoOOZefS74nJrcpD_yOIZTYUVw-uBTSNOb2bE2M-kQ_3tb59N3ORzOhY-QW85SXkol77fLKgUGPBUFwAWZgRQZZWWuLsmMKS6pVCK7JosY94wxXmYsh3xGPrY_ccAucT4kr2gOdGg7TCo08RSww35ITN8kle_bwYe23yXeJWsfdtM50uIUbG3AbzpOdFNcGfvZ9nhDrpw5RFz8c07e1w9vqye6eXl8Xi031IpCDBQtFqI0DjNAZVCBciXWJpforEKoAa2oM8N5A_VIxEY0SqBU3FjpoBFzcnfePQb_dcI46L0_hX58qSFnhYCC52JspeeWDT7GgE4fQ9uZ8KM5038G9WhQTwb1ZFD8AqAOZMw</recordid><startdate>20210101</startdate><enddate>20210101</enddate><creator>Cheng, Yuan-Ming</creator><general>MYU Scientific Publishing Division</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SP</scope><scope>7SR</scope><scope>7TB</scope><scope>7U5</scope><scope>8BQ</scope><scope>8FD</scope><scope>FR3</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20210101</creationdate><title>System for Real-time Measurement and Monitoring of Forging Force of Screw-forming Machine</title><author>Cheng, Yuan-Ming</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c373t-ece738afe52e9ae929f8eba64efc9e2b2ec3b5a11d2bb5aeed3d93e491ac4f2d3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2021</creationdate><topic>Bolts</topic><topic>Damage</topic><topic>Fasteners</topic><topic>Forging</topic><topic>Forming machines</topic><topic>Molds</topic><topic>Monitoring</topic><topic>Real time</topic><topic>Screws</topic><topic>Shutdowns</topic><topic>Time measurement</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Cheng, Yuan-Ming</creatorcontrib><collection>CrossRef</collection><collection>Electronics & Communications Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Sensors and materials</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Cheng, Yuan-Ming</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>System for Real-time Measurement and Monitoring of Forging Force of Screw-forming Machine</atitle><jtitle>Sensors and materials</jtitle><date>2021-01-01</date><risdate>2021</risdate><volume>33</volume><issue>11</issue><spage>3957</spage><pages>3957-</pages><issn>0914-4935</issn><eissn>2435-0869</eissn><abstract>Screws are commonly used fasteners. In general, the term "fastener" refers to machine components comprising screws and bolts used to affix two or more components together. Screw production consists of three steps, namely, heading, threading, and coating. During the forming process, the mold used may be damaged as a result of defects in the metal wire or metal bar. In this study, we employed the CBF-43S screw-forming machine developed by Chun Zu Machinery Industry as the monitoring target and performed kinetic analysis on the slider–crank mechanism of the machine using the provided parameters. Subsequently, the forging force of the machine was measured by a force sensor and its real time changes were recorded. When an error value was identified, the machine was immediately shut down and the mold was inspected for damage. Through this method, the detrimental effect of damaged molds on the quality of screws and bolts can be prevented.</abstract><cop>Tokyo</cop><pub>MYU Scientific Publishing Division</pub><doi>10.18494/SAM.2021.3722</doi><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0914-4935 |
| ispartof | Sensors and materials, 2021-01, Vol.33 (11), p.3957 |
| issn | 0914-4935 2435-0869 |
| language | eng |
| recordid | cdi_proquest_journals_2607327163 |
| source | DOAJ Directory of Open Access Journals; Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals; Alma/SFX Local Collection |
| subjects | Bolts Damage Fasteners Forging Forming machines Molds Monitoring Real time Screws Shutdowns Time measurement |
| title | System for Real-time Measurement and Monitoring of Forging Force of Screw-forming Machine |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-07T00%3A17%3A11IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=System%20for%20Real-time%20Measurement%20and%20Monitoring%20of%20Forging%20Force%20of%20Screw-forming%20Machine&rft.jtitle=Sensors%20and%20materials&rft.au=Cheng,%20Yuan-Ming&rft.date=2021-01-01&rft.volume=33&rft.issue=11&rft.spage=3957&rft.pages=3957-&rft.issn=0914-4935&rft.eissn=2435-0869&rft_id=info:doi/10.18494/SAM.2021.3722&rft_dat=%3Cproquest_cross%3E2607327163%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2607327163&rft_id=info:pmid/&rfr_iscdi=true |